The 72 inch long Continuous Hinge # PLR846 measures 2 inches wide when totally flat, so about 1 inch on each side of the 1/8 inch pin. view full answer...
I spoke with my contact at Curt and found that the distance from the top of the side brackets to the top of the hitch receiver tube is 9.8 inches. I made a picture showing this for you. view full answer...
I have attached a photo of the Camco RV Drain Hose, part # CAM37420 for you.
This drain hose features a Polypropylene trap on one end to attach to the shower or tub drain, and has a 25 inch hose with a plastic evacuation flange on the other end. As noted on the attached photo, the flange diameter measures 2-1/2 inches. view full answer...
The overall length of the Torklift SuperTruss Extension, # TLE1528, is 33-7/8 inches.
The length from the rear hitch pin hole to the receiver opening measures 31-3/8 inches.
The measurement from the front pin hole to the receiver opening measures 2-5/8 inches. view full answer...
The two round base plate mounting holes closest to the front of the vehicle are 9/16 of an inch in diameter. The rear, oblong hole measures 1-1/2 inches long and 1/2 inch wide. The center to center distance between the two round holes is 1-3/8. This information came directly from my contact in the Engineering department at Roadmaster. view full answer...
The dimensions of the Replacement Cover for the Extang Classic Platinum Snap On, Roll-up Tonneau Cover - Black Item # EX6560 on a 1981 Toyota pickup are going to be 76" x 61-1/2" view full answer...
If your 1974 Toyota Class C RV is built on the 1974 Toyota pickup chassis then we do have options for it, see link. I went out to the warehouse and pulled Firestone kit # F2445 to measure the air bag.
When compressed the height to the top of the spring is 2-5/8 inches and to the top of the valve it is 4-3/4 inches. When not compressed it is 6-1/8 inches tall to the top of the spring and 7-5/8 inches tall to the top of the valve.
The overall diameter is 6 inches whether compressed or not. view full answer...
I spoke with my contact at Stromberg Carlson and he said the Stake and Grill, # GR-1522, that you referenced is grill is heavy duty enough to hold a pot of coffee or about 5 lbs. The product is not designed to carry the load from cast iron skillets.
I have included a product demonstration of the stake and grill for you to checkout. view full answer...
From the center of the tube to the center of the tube for the Westin E-Series Round Nerf Bars # 23-0500 is measures 48" but then the overall length is 51".
Please note that this is designed to fit various models of Yukon, Tahoe, Blazer, and GM pickups from 1988 - 2000 so if you don't have one of these we'll need to find you some different nerf bars. view full answer...
The Air Lift Load Controller Compressor System for Air Helper Springs item # AL25852 will work great with the air bags already installed on your 1991 Toyota motorhome. This is a dual path system that will allow you to adjust the air pressure in your bags individually. You can use the included T's to connect the new lines and keep your current manual valves. view full answer...