Expert Answers about Mercedes-Benz E-Class

• How to Determine Correct Access Door or Cable Hatch Size for Trailer
• In order to select the correct hatch cover for your 2009 Forest River camper you need to know your hatch cut out size, or you can use a universal option, and I'll go over the selection of options we have and you can use this to determine which access door you can use once you take the appropriate measurements. The Valterra Electrical Cable Hatch for RVs - 8-1/2" Long x 8" Tall - White # A10-2151VP or Black # A10-2151BKVP will fit your camper if it has a 6-13/16" long x 6-3/8" tall hatch...
  view full answer...


• Will the Yakima JayLow Kayak Carrier # Y04073 work with a Hobie Outback Mirage
• It should, I looked up the specs on your Hobie Outback Mirage and it weighs 75 lbs, whereas the Yakima JayLow Kayak Carrier # Y04073 that you referenced has a weight of 80 lbs so it should work well for you. You will also want to determine the roof capacity of the vehicle you plan on carrying this with and be sure not to exceed this figure either. The lowest rated component in your setup is the overall capacity since your setup is only as strong as it's weakest link. I attached a review...
  view full answer...


• Recommended Hitch and wiring harness for a 1999 Mercedes E320
• To add a hitch to your 1999 Mercedes E320 you will want the Curt Trailer Hitch item # C11830. This hitch is custom fit for the E320 wagon and bolts to it with included hardware. This is a class I hitch with a 1-1/4" receiver. This is the only hitch available for your car. For a compatible wiring harness, I recommend the Curt Powered Tail Light Converter item # C59236. This will provide you with a 4-flat connector to control your trailer or accessory's lighting functions. If you are planning...
  view full answer...


• Which Trailer Hitch Fits 2014 Mercedes E-350 and Has Capacity for PWC Trailer
• For your 2014 Mercedes E350 Sedan the Curt hitch part # C11001 is a confirmed fit. The hitch itself has the capacity needed to tow a trailer with a 825 Sea Doo PWC, but you would need to check the owners manual of your vehicle to determine the vehicle's towing capacities and be sure to stay under them as well. For a ball mount you would want part # C45572 for a 2 inch hitch ball or the part # C45571 for a 1-7/8 inch ball. For trailer wiring you then would want the Tekonsha kit part #...
  view full answer...