There is a 7-Way adapter that will work with your 2013 Hyundai Santa Fe Sport's 4-way connector but you will need to run another power wire directly to your battery. You can't splice into your current one because they both need direct sources of power to function. You will want the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation item # ETBC7L. This 7-Way connector is designed specifically to work with wireless brake controllers like the Curt Echo item # C51180.
The kit includes... view full answer...
The Westin E-Series tube steps, # 23-3425, have a weight capacity of 300 pounds. Though the bars themselves may be capable of more weight, the mounting hardware and locations on the vehicle limit the capacity. view full answer...
I have a great answer for you. Unfortunately, Rhino-Rack does not provide the static weight capacity of their roof racks. This weight capacity is the weight limit of the rack when the vehicle is stopped. However, given that the Rhino-Rack RVP Roof Rack # RR87QJ attaches to your fixed mounting points in the flush rails on your 2021 Hyundai Santa Fe, it will be able to support people in a roof top tent as long as you do not exceed the weight capacity of the tent or the overall weight capacity... view full answer...
I spoke to Malone and the Brackets/U-Bolts can accommodate up tp 3 3/4 tubing, whether round or square. The u-bolts that come with the # MPG493 should be the ones that are used as they will center themselves when tightened down. view full answer...
The largest size for both of these boxes will be the 22 cubic foot model. Part # TH629906 for the Thule Motion, and part # TH6359B for the Thule Force. The Thule Force # TH6359B is the tallest at 18-3/4" tall, while the Motion is only 18" tall. The Motion however, is about 1" longer and 2" wider, making them both roughly 22 cubic feet.
As far as customer service, Thule and Yakima are our two major roof box brands. Both of them have excellent customer support. Not to say anything negative... view full answer...
The Curt Trailer Hitch Receiver part # C13152 is rated for up to 6,000 lbs. However, your 2017 Hyundai Santa Fe is only rated for 2,000 lbs unless you have the factory tow package then you are rated for up to 5,000 lbs. The lower of the two ratings (hitch/vehicle) will need to be the limit you abide by. Please also note if the trailer is over 1,653 lbs it will need to have brakes according to the owner's manual. I have attached some other parts you will need below.
Curt T-Connector Vehicle... view full answer...
The Edge Insight CS2 Comprehensive Gauge Display # EP84030 that you referenced will display the parameters you are interested in. It will show oil pressure and temperature, coolant temperature and transmission fluid. view full answer...
Your friend will first to consult the vehicle owners manual of his 2012 Hyundai Santa Fe to see what the towing capacity is for his specific model. If the towing capacity of the vehicle and the trailer hitch used exceed the gross trailer weight then the Santa Fe would be able to tow the trailer.
The Curt trailer hitch # C13073 is rated for 350 pounds tongue weight and 3,500 pounds gross trailer weight. Given the average weight of a horse this probably means that only one horse could be... view full answer...
The Curt Adjustable Width Trailer Hitch Receiver for part # 13703 is rated for 350 lbs. of toungue weight and 3500 lbs. of gross trailer weight. In your situation you would be well below the stated maximums and using the bolts to install the hitch to your frame would be perfectly acceptable.
Of course please check with your camper's manufacturer to ensure that your camper is rated for towing once you have found that you do not want to exceed the lowest weight rating of the camper, hitch... view full answer...
The Curt Trailer Hitch Receiver # C13073 uses M10 - 1.25 bolts to mount in the factory weld-nuts on the frame of your 2012 Hyundai Santa Fe. Our Metric Tap and Die Set # PT43FR will have this size tap included so you can chase your weld nuts. Do be sure to use some oil on the tap to help it clear the threads. view full answer...
The overall dimensions of the Curt Trailer Hitch Receiver # C13073 for your 2012 Hyundai Santa Fe are 54" wide x 11" tall (drop) x 15-3/4" deep. Attached is a photo showing this.
Since this is a custom fit application for your vehicle it will match up with the mounting holes in the frame of your vehicle. It hugs the bumper on a Santa Fe really well and when we installed this on a 2012 model we found the hitch height to be 15" - this is measured from the ground to the top inside of the... view full answer...
Yes, we do. To add a wiring harness to your 2022 Hyundai Santa Fe you will want the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter item # TK44ZR. This 7-way harness plugs in behind the driver's side rear wheel under the lower fascia. I have attached a picture below to help you find it.
The Tekonsha item # TK44ZR also includes a brake controller adapter that works with any Tekonsha brake controller like the item # 90195. view full answer...
You sure can! However, since you're going to use a Curt Echo item # C51180, I recommend using the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation item # ETBC7L instead. Same style of connector but it doesn't include the blue brake controller wire you won't need with the Curt Echo item # C51180.
The Universal Installation Kit for Trailer Brake Controller item # ETBC7 will work with a Curt Echo item # C51180 but it is designed for a traditional in cab brake controller which... view full answer...
The Curt Cargo Carrier # C18150 weighs approximately 50 lbs. This carrier fits 2 inch trailer hitches, has a 500 lb weight capacity and has inside dimensions of 57-1/2" long x 19-13/16" wide x 5-5/8" deep.
I do recommend using Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 to both lock the carrier and keep it from rattling inside your hitch. view full answer...
I went out to the warehouse and measured the etrailer Trailer Hitch Receiver part # e28AR which is a fit for a 2022 Hyundai Santa Fe for you. The crosstube thickness/width is 1-3/8". view full answer...
The Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long # C45048 is measured by the distance between the center of the hitch pin holes. The hitch pin holes closest to each end are 34" apart center on center; the middle hitch pin hole to the hitch pin hole closest to the 2" receiver end are 24" apart. view full answer...
The tires for the Yakima Rack and Roll Trailer like the Replacement Tire for Wheel on Yakima Rack and Roll Trailers # Y8880282 are rated for 94 mph, although to be honest I'm not sure that's a speed I'd be comfortable testing... view full answer...
To see all the dimensions of the replacement fifth wheel bracket part # 30720 check out the picture I attached that has all of the dimensions.
Looks like the 4 hole side is 6-1/4 inches, the 3 hole side is 3-1/2 inches and the width of the bracket is 2-1/2 inches. view full answer...
If your boat trailer came equipped with hydraulic drum brakes on both axles, it is best to keep both sets in working order, but if this is the route you prefer you'll want to put the new brakes on the rear axle where most of the boat's weight will be concentrated.
I linked our main page for hydraulic drum brakes. You can use the filters on the page to select your overall axle capacity (both of your current axles' capacities added together) to see if we have brakes of the appropriate rating,... view full answer...
Go To Results