The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75528 which is a confirmed fit for your 2015 GMC Acadia SLE has mounting holes which are 43.31" apart left to right (center to center) and 2.18" front to back (center to center). If you will be using the trailer hitch for towing then you will also need a trailer wiring harness, the T-One Vehicle Wiring Harness part # 118270 and ball mount/hitch ball, the Ball Mount Kit part # 989900.
If your mounting holes are not in the above locations... view full answer...
I pulled the item from our warehouse and measured the head of the bolt to be 7/8 inches. Which can also translate to a 22 mm or 23 mm socket. view full answer...
The mounting bracket is 3-3/8 inches across and 3-7/8 inches tall. The mounting holes on top of the bracket are 2-1/4 inches apart center on center.
The holes to mount the 7-way to the bracket have a few different options. The two round holes on the sides are 2-7/8 inches apart. The top set of the four holes are 1-3/4 inches across and 2-1/2 inches up and down. The other set of holes are 2-1/2 inches across and 1-1/8 inches up and down.
Some of the hole spacing is hard to explain... view full answer...
The Thule Motion XT Rooftop Cargo Box # TH629906 (Black) or # TH629907 (Silver) is a fantastic choice, you really know your cargo boxes! It not only has a very large 22 cubic feet of cargo space but is also easy to use, secure and aerodynamic for a quiet ride. In a similar vein, you are also going to want a roof rack on your 2015 GMC Acadia with aerodynamic bars to ensure a quiet ride, and like the cargo box, the best is from Thule. Your Acadia will have raised rails, so the roof rack you... view full answer...
If your choice of ball mount rise or drop means being a little high on the Acadia side this is usually preferable to the trailer being higher. With any trailer and vehicle there will always be a bit of vehicle rear-end squat from the trailer's tongue weight (TW). This means that if the hitch ball is a bit taller than the level trailer's coupler this is okay since this greater height on the vehicle side will offset the squat.
Please refer to the linked article on ball mounts for more information... view full answer...
On your 2019 GMC Acadia, there are many roof racks rated for 120 lbs and up to 165 lbs. According to the online owners manual the roof structure can support 220 lbs, so you will be limited by the roof rack itself.
I recommend the Rhino-Rack Vortex Aero Crossbars # RRVA118B-2 with Rhino-Rack SX Series Legs # RRSX100. This rack is rated for 165 lbs. view full answer...
Your Waverunner and trailer should weigh in at around 1200 lbs at a maximum, so the # 3371803307 Buyer's Products 6K capacity ball mount you referenced should have plenty of capacity for your needs. In order to safely tow, you'll need to go with a ball mount that will tow the trailer as level as possible. When we installed a hitch on a GMC Acadia of the same generation as yours, we found that the hitch receiver sits at about 19-1/2 inches above the ground. The # 3371803307 ball mount offers... view full answer...
Based on information I could find for the Kat's Heaters Custom Fit Engine Block Heater # KH11811 I see most people mention they see the engine temperature reach around 40-50 degrees Fahrenheit. So it appears this is the range the heater will turn itself back off. view full answer...
The Weathertech Floor # WT40924 that you referenced was designed to fit from the back of the second row of seats, over the third row of seats when they are folded down, and then to the back of the rear cargo area. view full answer...
The Replacement Collars for BlackHawk 2 # RM-9200-8 are specifically for replacing the swivel collars on your BlackHawk 2 all-terrain tow bar # RM-422.
The Replacement Swivel Collar for Roadmaster Tow Bars # RM-9200-6 is specifically designed to replace your damaged swivel collars on your Falcon All-Terrain tow bar. The # RM-9200-6 can also convert your older model Blackhawk 2 RM-427 from Blue Ox base plate application to Roadmaster base plate application without needing an adapter.
These... view full answer...
I went out to our warehouse and pulled the 2" Round Grommet part # A54GB for you. The outside diameter of this grommet is 2-3/4". As described on the product page, it is designed to house a 2" round light with a mounting hole of 2-5/16". view full answer...
The Red and Amber Self-Adhesive Reflector Kit # RE52ARK are 4 inches long, 1-1/4 inches tall, and 3/8 of an inch thick. I have linked a video that shows this for you. view full answer...
I measured one of the Curt Trailer Hitch Receivers # C13293 in our warehouse and it came up 40-1/8" wide measuring from the center of the mounting holes from the drivers side frame to the passenger side frame rail. I have included this in an image below as well. view full answer...
I pulled a License Plate Relocation Kit # 32-0055 from our warehouse to measure and found that at its widest it measures 8 inches and the depth of it would be 2 inches.
Check out the video I attached if you want to see exactly where I made these measurements. view full answer...
Trailer wheel and tires are not balanced typically which is why our wheel and tire combos like the part # AM31990 are not balanced. It doesn't really end up making a difference so we don't recommend it either. view full answer...
The actual height of a vehicle's hitch will depend on several things including the age and condition of the suspension, the wheel/tire size, the condition of the tires (are they new or do they have 40K miles on them) as well as the passenger and cargo loads in the vehicles. With so many variables in play the best way to choose the correct ball mount to keep your hitched trailer level is to follow the easy steps outlined in the linked article.
Then you can use the link to our ball mount... view full answer...