I would be happy to. To flat tow your 2017 Ford F-250 you will need the following parts:
Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item # e84ZR
Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-524452-5
Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267
Supplemental Braking System - Blue Ox Patriot Radio Frequency item # BLU37TR
Brake Light Relay - Roadmaster Brake-Lite Relay Kit for Towed Vehicles... view full answer...
Yes it is. The Black Armour Heavy-Duty Custom Truck Bed Mat item # BA67AR does come in two parts. This mat is confirmed to fit the 8' bed length of the 2022 Ford F-250.
We do have a one piece option for a custom fit rubber bed liner for your truck. It is the DeeZee item # DZ87012. This one is slightly thinner at 3/8" over the 1/2" for the Black Armour. view full answer...
The correct B&W Companion slider for your 2023 Ford F-250 standard bed with prep package is the B&W Companion OEM 5th Wheel Trailer Hitch w Slider # BWRVK3370.
The &W Companion OEM 5th Wheel Trailer Hitch w Slider # BWRVK3370 weighs 265 lbs.
- 73 lbs. for the head
- 192 lbs. for the base view full answer...
To add a set of 5th wheel rails to your 2023 Ford F-250, I recommend the B&W Custom Installation Kit w/ Base Rails item # BWRVK2402. These custom fit brackets mount to existing holes in your Ford's frame. They fit both the 6-3/4' and 8' bed lengths.
To make towing with a 5th wheel easier I also recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness item # C57010. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This... view full answer...
The 18k Demco Hijacker Autoslide, part # DM8550024, weighs right around 300 pounds and the 21k model, part # DM8550038, is closer to 330 pounds. Both of these hitches fit right into the factory puck system of your 2019 Ford F-250. I've linked a video of them both for you to take a look at.
If you're looking for a lighter hitch I recommend the B&W Companion, part # BWRVK3370. It also fits right into the pucks in your Ford's bed and weighs about 260 pounds. Plus, it's pretty easy to... view full answer...
The Roadmaster Spare Carrier # RM-195125 has a maximum pull capacity of 6,000 lbs and a maximum tongue weight of 200 lbs and can accommodate up to a 16.5 inch tire. So you'd be able to carry wheel and tire that weighs up to 200 lbs and has a rim diameter less than 16.5 inches. view full answer...
The overall length of the DeeMaxx Hydraulic Brake Hose # DE58GR that you referenced of 60 inches does include the fittings. So the distance is from end to end. view full answer...
To add a roof rack to your 2023 Ford F-250 crew cab, I recommend the following parts:
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK498
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2
Or the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2 if you use a lift assist kayak carrier.... view full answer...
For all of our springs we list the unloaded length measured center eye to center eye straight across. Leaf springs can extend up to 1" when flexed. If you are looking to replace old leaf springs, you will want to jack up the trailer so that the axle is hanging, then take your measurement. Keep in mind that older leaf springs can flatten out over time. So even with the spring unloaded, it may measure slightly longer than the new replacement springs. A 26" spring like the # e22YR is a very... view full answer...
To add a front mounted hitch to your 2023 Ford F-250, I recommend the EcoHitch Hidden Front Mount Trailer Hitch Receiver item # 306-X7904. This hitch is custom fit and bolts to your Ford with included hardware. It does mount behind your front license plate.
This front mounted hitch has a 1,000 lbs capacity for mounting accessories and a 10,000 lbs gross trailer weight.
I have attached an installation video so you can see what this hitch looks like when installed. view full answer...
The head of the Curt Q20 Hitch part # C16530-16020 weighs 108 lbs and the roller weighs 170 lbs.
I attached a review video for this hitch for you to check out as well. view full answer...
The Demco Hijacker Autoslide 21K # DM8550038 weighs approximately 305-lbs. The head of this hitch weighs around 70-lbs and can be removed to help make moving and installing this 5th wheel hitch a little bit easier. view full answer...
To add a set of 5th wheel rails to your 2011 Ford F-250, I recommend the Reese Quick-Install Custom Installation Kit w/ Base Rails item # RP50026-58. This kit is custom fit and will install in predrilled holes in your truck's frame to save time during installation. These rails are industry standard and will work with most 5th wheel hitches on the market.
The Reese 5th Wheel Trailer Hitch w/ Square Tube Slider item # RP30051 would be a great option. This sliding hitch has a 16,000 lbs... view full answer...
Yes, the B&W Companion OEM 5th Wheel Trailer Hitch item # BWRVK3370 will fit in the puck system of your short bed 2024 F-250. The Companion Slider has a 20,000 lbs capacity and will give you 12" of travel for making tight turns and backing.
I really like the Companion because of its 1" thick dual jaws that provide a 360-degree jaw to kingpin contact. This system minimizes the chucking, jarring, and noise that can occur when towing a 5th wheel trailer. This not only provides a more secure... view full answer...
Thanks for the picture! I checked with Yakima there's no specific distance with the Yakima Outdoorsman 300 Ladder Rack item # Y01137-Y00411 that states how far the canoes can be mounted over the cab of your 2011 Ford F-250. A good rule of thumb is three feet though. So long as you stay below the 300 lbs weight capacity and have them properly secured you will be good.
The top of the crossbar for the Yakima Outdoorsman 300 Ladder Rack item # Y01137-Y00411 is 29" from the top of your F-250's... view full answer...
Yes, it will! The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack item # 311-CR4008 will work with your 2024 Ford F-250 so long as you have one of the following tonneau covers to attach it to Pace Edwards Bedlocker, JackRabbit, and Full Metal JackRabbit tonneau covers with Explorer Series Rails. This rack is specifically designed to slide into the T-slots of Explorer rails like the UltraGroove Hard Tonneau Cover item # PE87QJ has. view full answer...
Yes, it does. The Spacer Kit for Timbren Suspension item # T68MR will work with the Severe Service Timbren Suspension Enhancement System item # TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1" spacers. When installed these spacers make the item # TFRTT350J system 7" tall. I have attached a diagram below.
If you don't want need to buy the full kit, you can buy the 1/2" spacer item # TA25722-90P00 or the 1" spacer item # A25723-90AH00 separately.... view full answer...
The Reese Elite Under-Bed Rail Adapter you mentioned, # RP30156, is just under 3 inches tall at 2-15/16 inches.
To compensate for the additional height you can adjust your 5th wheel hitch to the lowest setting it can go to and still function (on Reese slider hitches you cannot use the lowest setting). Or you can raise the pin box on the trailer if there are mounting holes above the position the pin box is in now.
If you have already done these things and the front end of the trailer is... view full answer...
Yes, they can! Both the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch item # C60700 and the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item # AL88399 are confirmed to fit the 2017 Ford F-250 and are compatible with each other.
I have linked a couple of installation videos below to help you get these parts set up.
I also recommend adding the Firestone Air Command item # F2610 to your truck. This onboard compressor will allow you to adjust the PSI in your air bags from... view full answer...
Modern running boards and nerf bars are fairly tight to the body of the vehicle and # DZ16121-16327 for your 2017 Ford F-250 is no exception. From the bottom of the truck body to the top of the step is no more than a couple of inches. I included a picture as an example. view full answer...
Go To Results