Will the Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack Fit a 2024 Ford F-250?

Question

Question:

Will this ladder rack work on a 2024 Ford F250 Super-Duty Crew Cab w/ 8foot Bed?

asked by: Jim B

0

Expert Reply:

Yes, it will! The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack item # 311-CR4008 will work with your 2024 Ford F-250 so long as you have one of the following tonneau covers to attach it to Pace Edwards Bedlocker, JackRabbit, and Full Metal JackRabbit tonneau covers with Explorer Series Rails. This rack is specifically designed to slide into the T-slots of Explorer rails like the UltraGroove Hard Tonneau Cover item # PE87QJ has.

expert reply by: Jerred H

0

Answer 1

The Pace Edwards Contractor Rig Rack Truck Bed Ladder Rack #311-CR4008 requires a tonneau cover with t-slots like the Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails #311-JEFA05A28 in order to mount. According to Pace Edwards…

view full answer...

Answer 2

The Pace Edwards JackRabbit Retractable Tonneau Cover w Contractor Rig Rack #JEFA18A44-CR4008 that you referenced does fit your 2019 Ford F-250 6-3/4 foot bed and the length of the ladder rack is 120 inches.

view full answer...

Answer 3

Yes, you can carry a 40ft extension ladder on your 2003 Dodge Ram 1500 with 6-1/2 ft bed using the Thule SR Sliding Ladder Rack, #TH43003XT-501EX. You will have about 6 ft of overhang on the front and back if you center the ladder on the ladder rack,…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 7

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 8

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed Rack…

view full answer...

Answer 12

Thanks for reaching out, Roy! The tie-down rails you see in the discussion video for your 2023 Ford F-150 Lomax Stance Hard Tonneau Cover #LOM76DR isn't something that we carry and it doesn't look like Lomax has them either, but we do have…

view full answer...