Expert Answers about Chevrolet Camaro
- Diameter of Round Center of Replacement Rubber Spacer 853-5874
- The diameter of the round center of the # 853-5874 is 1-1/16 inches.
view full answer... - Tandem Axle Trailer Spring Hanger Kit and 6K Leaf Springs
- The hanger kit I recommend is part # APT3HD which includes front, center and rear hangers, equalizers and bolts. This kit is good for axles up to a 7K rating and most 3-inch diameter axles are rated for 6000 to 7200-lbs. The linked video will let you see the kit contents. Please note the kit does not include parts to mount the axle to the suspension; for that use # APUBR-8, one kit per axle.
For double-eye leaf springs please refer to the linked page that displays all 6K rated springs...
view full answer... - What is the Inlet and Outlet Diameter of MagnaFlow Spun Stainless Catalytic Converter Part MF54956
- The inlet and outlet diameter is 2-1/2 inches. This Catalytic Converter is 49-state approved. It is not approved in California.
view full answer... - Can a Trailer Hitch Installed on a 2010 Chevy Camaro be Used to Tow a SeaDoo
- The Draw-Tite Class I trailer hitch # 24850 for your 2010 Chevy Camaro has a capacity of 2,000 pound gross trailer weight and 200 pounds tongue weight. Provided that the gross trailer and tongue weight of your SeaDoo trailer, loaded and ready to tow, is under those capacities then yes, you can pull the Seadoo with this hitch. Please note the hitch does not fit models with ground effects package.
Check the Camaro owners manual to determine if it lists a capacity for the vehicle and go by...
view full answer... - Curt Hitch C11900 for 2016 Chevy Camaro
- The Curt hitch # C11900 that fits your 2016 Camaro has a shipping weight of 24-lbs. This figure includes the weight of the supplied mounting hardware and the shipping carton.
You can refer to the linked video to see an installation on a different car. The written instructions are linked too, and these give you the step-by-step process and also a list of the specific tool sizes you'll need. You can review these ahead of time if you like so you have everything ready for your installation.
If...
view full answer... - How Much Power Does a Cat-Back Lid and Filter LS1 Car Have
- As the owner of a 98 Pontiac Trans Am with an LS1 and an automatic transmission I am pretty familiar with the gains associated with the basic mods of these cars. Magnaflow claims you will gain about 14 horsepower and 18 ft-lbs of torque. That seems a bit generous, but it will definitely sound better and you will pick up power.
Lid and air filter is usually worth another 10 horsepower and torque as well. We carry a filter similar to the one you are looking at.
Most lid and catback cars...
view full answer... - How Much Horsepower Does Magnaflow Cat-Back Kit Give 2014 Chevy Camaro with 3.6 liter V6
- Cat-back exhaust systems like the Magnaflow part # MF15353 that fits your 2014 Chevy Camaro with a 3.6 liter V6 will give the vehicle around 10 horsepower or so. If you combine that with a cold air intake and an underdrive pulley you'd likely see around a 20 horsepower gain. Also the car would sound better!
view full answer... - What is the Ground Clearance Measurement with Curt Trailer Hitch Installed on 2016 Chevy Camaro SS
- I don't have an exact ground clearance measurement for Curt hitch # C11900 and a 2016 Chevy Camaro SS. But if you look at the picture I have included you will see that the top of the receiver is directly below the bottom-most part of the rear fascia. If you measure from the ground up to that point and then subtract about 1/4 inch that will be where the top of the receiver will be.
You will most likely need a ball mount with a rise in it but that is true for many applications. Figuring...
view full answer... - Can the Draw-Tite # 24850 on a 2012 Chevy Camaro Tow a Motorcycle Trailer
- That really depends on how heavy your trailer and motorcycle are. Most likely yes, but this hitch has a 2,000 gross trailer weight rating and a 200 lb tongue weight rating. So as long as your motorcycle and trailer are under those capacities and the towing capacities listed in the owners manual you would be good to go.
When determining the towing capacity of a setup you should always go with the lowest rated component as your overall capacity. So if your vehicle is rated lower than the...
view full answer...
Go To Results