We actually have a selection of recessed gravity fill ports that you can use on your camper that are lockable. I will list them for you below.
Slide-Out RV Gravity Fill Inlet with Lockable Latch - Polar White # 37237525
Valterra Lockable RV Gravity Fill Water Inlet - White # A01-2002VP
Valterra Lockable RV Gravity Fill Water Inlet - Black # A01-2002BKVP
Valterra Lockable Dual RV Water Inlets - City Water and Gravity Fill - Plastic Valve - White # A01-2004VP
Valterra Lockable Dual RV Water... view full answer...
We have a wide selection of water inlets and the right one for your camper is going to depend on the size of the cutout and type of connection you have. For example, the Valterra Flush Mounted Telescoping Water Inlet for RVs # R920TW is 3-3/8" by 3-3/8" with a 1-3/8" x 1-1/4" barbed inlet.
I have added a link to a video review of that inlet, as well as a link to our selection of water inlets for you to check out. view full answer...
The best way to keep your inlets and valves from freezing on your RV is to make sure they are properly insulated. You can likely use some foam pool noodles or some sort of pipe wrap on the inside of the RV over the water inlet in order to help with insulation.
The other solution you could potentially use is the Valterra Self-Regulating Heating Cable for RV Plumbing # W01-1572 and wrap that around the pipes to help make sure that they're staying warm. This cable has an integrated thermostat... view full answer...
There are no fittings available for the Camco RV Plastic Fresh-Water Fill Hose # CAM36601. It would attach directly to your RV's fill spout or city water inlet. view full answer...
We have one smaller locking hatch than the Valterra City Water Inlet and Lockable Hatch # A01-2004VP which fits rough opening cutouts of 5-7/8" wide x 4-3/4" high. It is the Valterra Universal Inlet and Lockable Hatch # A01-2002VP. It has overall dimensions of 6" wide x 6-1/2" high and fits both 4-1/4" wide x 4-3/4" high and 4" wide x 3" high cutout openings.
If that doesn't work, can you give me the dimensions of the rough opening you are looking to fit?
We may need to get more... view full answer...
We don't carry any kind of blank that could be screwed on but you could a hard plastic sheet from your local hardware store and cut it to fit over the hole and then drill out the correct sized hole for the Mighty Cord Replacement RV Power Inlet # A10-30INVP in it. with this method you could use the same screw holes that you already have as well.
I recommend using some butyl tape # AL28FJ and non-sag sealant # AL28KV on the plastic blank to prevent any water from leaking in and damaging... view full answer...
I'm not sure of the exact reason why some of these don't have gaskets and I'm not aware of any reason why they don't include them; none of the caps we carry come with an actual gasket but there are some options that provide a better seal than others. I recommend checking out the Replacement RV Gravity Fill Spout with Plastic Cap - Black # 372222-224BK-A, which doesn't have a gasket but does create a seal on your spout using screw in fittings that will keep debris and outside water from... view full answer...
I checked directly with SmartPlug, and their TV/internet inlet with the Coaxial Connector does come in white. The correct part for you is the following:
- SmartPlug RV TV/Internet Inlet - 1 Coaxial Connector - White # SM78VR view full answer...
We do not have an extra/replacement coax port for the SmartPlug RV TV/Internet Inlet # SM88VR, nor do we have a plastic version with 2 coax ports. However, if you already have the SmartPlug RV TV/Internet Inlet # SM58FR, you can remove one of the coax ports and switch it to the plastic SmartPlug.
I will also say that the SmartPlug RV TV/Internet Inlet # SM58FR only weighs just over a pound, so it would not be too heavy for an RV sidewall. view full answer...
The Mighty Cord Dogbone RV Power Cord Adapter # A10-3050FBK that you referenced has 50 Amp Female and 30 Amp Male connectors. This allows connecting a 50-amp RV power inlet to 30-amp service.
For a similar product that allows connecting a 50-amp RV inlet to BOTH 30-amp and 15-amp service you can use Camco Power Grip RV Power Maximizer # CAM55025. This allows connecting to both 15 and 30-amp service at the same time to provide 45-amps total current to the RV. Each power connection can... view full answer...
Along with your Mighty Cord 30 Amp Twist Lock RV Power Inlet # A10-30INVP you can use their mating replacement female Twist Lock Connector # A10-30FDT. If you care to add a weather-resistant locking ring you can also use part # A10-30CV. view full answer...
For all intents and purposes the only difference between the Mighty Cord Replacement RV Power Inlet # A10-30INBKVP and the # 277-000137 is going to be the color. One is white and one is black. view full answer...
We don't currently have the Furrion 30 amp power inlet in black, but we do have it in Stainless Steel # F30ITSSS if you want the Furrion brand name.
If you want something closer to the # 431861 in style we have the Epicord 30 Amp Twist Lock Power Inlet - Black # 277-000138 or the Mighty Cord Replacement RV Power Inlet - 30 Amp Twist Lock - Black # A10-30INBKVP. view full answer...
That specific model has been discontinued by SmartPlug and replaced with the SmartPlug RV Internet Inlet # SM38FR, which has a second port that you could add in a tv inlet later on if you wanted to. view full answer...
We carry the SmartPlug RV Internet Inlet, # SM38FR with 1 ethernet port or the # SM98FR option with 1 coaxial and 1 ethernet port. These are only sold as a whole assembly. view full answer...
What I think you are asking is for what is commonly referred to as a dog bone, something with a 90 degree angle for your power cord that fits the 30 amp Mighty Cord Replacement RV Power Inlet, # A10-30INBKVP. That would be the Mighty Cord RV Power Cord Adapter, # A10-3030D90VP.
We have the Mighty Cord RV Extension Cord, 30 Amps at 15' in length, # A10-3015EH, or # A10-3025EH for 25' length and # A10-3050EH for 50'.
Please note the linked product review video below. view full answer...
Yes, if you have the "mousehole type" and want to modify/upgrade to the newer style then the Epicord 30-amp Twist Lock Power Inlet # 277-000137 is great choice. view full answer...
I understand what you are looking to do: install an AC power inlet on your work trailer that would allow you to plug in a standard 110-VAC extension cord between a standard household outlet and that AC power inlet.
We do offer cable hatch products like # A10-2151VP, shown on the linked page, that would serve as the mechanical port for such a connection but we do not offer the actual AC outlet. That you can source from an electrical supply house.
You will definitely want to use a GFI-protected... view full answer...