bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Toyota Tacoma


  • Ladder Rack Recommendation for 2017 Toyota Tacoma with Bed Liner on Bed Rails
  • Yes we do! If you have the Deck Rail System on your 2017 Toyota Tacoma then the Rola Haul-Your-Might T3 # 59799 is what I recommend going with. If you don't have the Deck Rail System then the equivalent is the Thule T-Rac Pro2 # TH37005XT. The Haul-Your-Might T3 has an 800 lb weight rating while the T-Rac Pro2 is rated for up to 1,000 lbs. I have attached installation videos of both racks on a 2018 Tacoma with the bed liner on the bed rails for you to check out. As you can see, they are...
    view full answer...

  • What Lighted Steps Are Available For A 2003 Toyota Tacoma And How Are They Wired
  • If your 2003 Toyota Tacoma is a Xtra Cab 4WD 2 Dr. you can use the Westin Molded Lighted Step Boards with Custom Install Kit, part # 27-0005-1085. If your vehicle is the 2003 Toyota Tacoma Double Cab you can use the Westin Molded Lighted Step Boards with Custom Install Kit, part # 27-0015-1605. There are some non-lighted steps or boards that are cheaper than the lighted steps or boards and some higher quality non-lighted steps or boards that are more expensive. It seems to vary it just...
    view full answer...

  • Does Curt Trailer Hitch Receiver Fit 2023 Toyota Tacoma
  • Yes, I verified directly with the manufacturer that the Curt hitch does fit your 2023 Toyota Tacoma, with the correct part being the following: - Curt Trailer Hitch Receiver # C13264 If you'll be towing and also need a 4-way wiring harness the correct part is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56349.
    view full answer...

  • Do You Carry a 2" Hitch Ball With Rise Having a 1" Diameter and 3" Long Shank?
  • We will only have a 2" ball with a 3" shank and no rise # C40020. Our 1" Rise # C40033 and 2" Rise # C40034 balls only have a 2-1/8" long shank.
    view full answer...

  • Availability Of a Black Gull Wing Crossover Truck Tool Box
  • Currently UWS only offers the Gull Wing # UWS00016 in a bright aluminum finish. The DeeZee Hardware Series Truck Bed Tool Box # DZ8370SB is currently our only black tool box which uses gull wing lids. It is a slightly wider box at 69-3/4" versus 64" on the UWS you found.
    view full answer...

  • Brake Controller Wiring Harness for a 2015 Toyota Tacoma
  • The Tekonsha brake controller wiring harness for the 2015 Toyota Tacoma is # 3040-P. I have linked a video showing an installation using this harness. Please note that the extra white ground wire in the harness does need to be attached to a clean metal surface to create an adequate ground for the brake controller.
    view full answer...

  • Options For Carrying 2 Kayaks On The Roof Of A 2013 Toyota Tacoma
  • I have a solution for you, but there are not any ladder racks for your 2013 Toyota Tacoma Double Cab with 6' bed that can be used with a toneau bed cover. If you would like to remove your tonneau cover then you could use T-Rac Pro2 Ladder Rack # TH37004XT. This is a really nice ladder rack that has an impressive weight capacity of 1,000lbs. The two crossbars have built-in channels which allow many accessories to be mounted. If you would like to keep your bed cover then your only option...
    view full answer...

  • Trailer Wiring Harness for 2016 Toyota Tacoma
  • We do not have a plug-n-play trailer wiring harness for the 2016 Toyota Tacoma but we do have 4-pole trailer wiring kits that will work for you. Curt harness # C59236 will connect to the truck's taillight wiring to get it's light signals and to the truck's battery to get it's 12V power for the trailer's lights. The linked article includes helpful tips for installation. This powered type of harness protects your truck's wiring from any shorts, overloads or other faults in your trailer's...
    view full answer...

  • Replacement Modular Upright Arm For Thule TracRac TracOne Truck Bed Ladder Rack
  • Replacement Modular Upright for TracRac TracONE Truck Bed Ladder Rack - Silver # 8523446001 that you were looking at is for TracRac TracOne models TA27000-01, TA27000-01-34, and TA27000-01-41500. There is a variation of this part in black # TA8523446002 which is made for TracRac TracOne models TA27000B, TA27000B-34, and TA27000B-41500.
    view full answer...

  • Are the Orange Rubber Bushings in the Extang Replacement Clamps Available as an Replacement Part
  • I reached out to Extang and they informed me that the only way to get the orange rubber bushing you're referring to is by purchasing the Replacement Clamps for Extang BlackMax, Classic Platinum, or TuffTonno Soft Tonneau Covers - Qty 2 # EX22008802.
    view full answer...

  • Is the Access Custom Bed Mat Cover # A25050189 Available for a 6-Ft. Bed on a 2009 Toyota Tacoma?
  • The Access Custom Truck Bed Mat - Snap-In Bed Floor Cover - Marine Grade comes in the 5-ft. version # A25050189 and the 6-ft version # A25050179 for the 2009 Toyota Tacoma. If you want a 6-ft. cover that is better quality, I recommend the WeatherTech TechLiner Custom Truck Bed Mat - Black # WT37415. The WeatherTech TechLiner is made with thermoplastic elastomer construction that resists harsh UV rays to prevent cracking and fading. The material also helps the cover maintain the contoured...
    view full answer...

  • Trailer Wiring Harness for 2003 Toyota Tacoma
  • To provide a connection for your trailer lighting, we offer the T-1 Vehicle Wiring Harness, part # 118379. This wiring harness features a converter that will combine the separate brake light and turn signal indicator circuits into a combined circuit for the trailer. The T-1 harness is very simple to install, it will plug inline into the existing factory connectors behind each tail light assembly with no cutting or splicing required.
    view full answer...

  • Wireless Air Compressor for Air-Lift Rear Suspension Kit Installed in 2013 Toyota Tacoma
  • For your existing Air-Lift rear-axle air bag set-up you can add the Air-Lift WirelessAIR Compressor System # AL74000. This system includes a feature that automatically restores your pre-set pressure in case of a pressure drop and digital air pressure gauges allow you to monitor your air bag pressure. To also have the ability to top off tire pressure you will need a compressor system that uses an air storage tank such as the Air-Lift QuickShot # AL25690 but note this system is not wireless.
    view full answer...

  • Availability of a Black Ladder Rack For a 2022 Toyota Tacoma With a 6 Bed
  • I have some options for you as the T-Rac Pro2 Ladder Rack # TH37005XT is not available in black. If your 2022 Toyota Tacoma with the 6' bed has the factory deck rail system you will be able to use either the Thule TracRac TracONE Ladder Rack # TH27000XTB-501 or Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XTB-THXK4B that are both black in color. If you do not have the deck rail system I recommend the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-58.
    view full answer...

  • Do You Carry a Towing Start Kit that Includes a 1-7/8 inch Ball
  • The Curt Towing Starter Kit # C45534 comes with a 2 inch ball since it is the most common ball size. If you need a 1-7/8 inch ball, you would need to piece together a kit or get a different kit. We do have a kit with a 1-7/8 inch ball, part # 989899. It includes 2 ball mounts and 2 balls and an etrailer.com bag. It includes a standard pin, not a locking hitch pin. If you wanted to piece your own kit, you could use part # e98880 for the lock, Curt ball mount part # C45010 and Tow Ready...
    view full answer...

  • Leer Soft Tonneau Cover for a 2018 Toyota Tacoma
  • The item you linked to is for a Chevy/GM truck but you list your vehicle as a 2018 Toyota Tacoma. I assume that you are looking for a Leer Soft Tonneau Cover for a 2018 Toyota Tacoma. That part number is, # LE35VR for a truck with a 6 foot bed. For a 5 foot bed we have the Leer Soft Tonneau Cover, # LE55VR available.
    view full answer...

  • Power Locking Tailgate Handle for 2014 Toyota Tacoma
  • The Pop & Lock locking tailgate handle and power conversion kit is part # PAL8540. The kit is a confirmed fit for your 2014 Tacoma. You can see current pricing by clicking the provided product link.
    view full answer...

  • A-iPower 2000-watt Inverter Generator for Portable Power
  • The A-iPower 2,000-Watt Portable Inverter Generator - 1,600 Running Watts - Gas - Manual Start # 289-SUA2000I is what I believe you are looking for and it is available. It has a Senci 4-stroke engine that has cast iron cylinder sleeves for long engine life. It can be paired with an additional 2,000 watt generator from A-iPower but allow parallel connection with increased output. This unit is efficient and quieter than a typical vacuum cleaner.
    view full answer...

  • Electric Trailer Brake Controller Harness for a 2010 Toyota Tacoma with Factory Tow Package
  • For your 2010 Toyota Tacoma, you can use the Tow Ready brake controller harness, part # 3040-P. You would just need to cut off the end that plugs into the brake controller and then just color match the wires from the harness to the loose wires on your brake controller. White is the ground, blue is brake output, black is 12-volt hot lead, and red is the stop light switch. You can solder them together or use butt connectors. The plug is located underneath the dashboard, to the left of the...
    view full answer...

  • Availability of Towing Mirrors for 2007 Toyota Tacoma
  • We do indeed have a few universal towing mirrors that would work well on your Tacoma. The K-Source Clip On, part # KS3891 uses ratcheting straps to fit tightly to your factory mirrors. As you can see by the customer reviews, the mirrors are highly rated. Another option would be the Cipa Deluxe Door Mount Mirror, part # 11650. This mirror is also highly rated, mainly because of the nearly vibration free fit. I've linked you to product demonstration videos for both mirrors. None of our...
    view full answer...