The Curt # C29UR and the Draw Tite part # 76046-SK are definitely the most hidden options for your 2021 Chrysler Pacifica Hybrid but the edge goes to the Curt in terms of least visible since the safety chain loops are horizontal and smaller. I attached pictures of both. The horizontal safety chain loops would also be the quietest. view full answer...
We do offer oil, transmission and power steering coolers that are suitable for your 2008 Chrysler Town and Country. There are also dual-core combination coolers that can handle cooling of two separate fluids within one housing. These coolers are not vehicle-specific so essentially you can use a large a cooler as you can find space for it. We do not offer OEM replacement or aftermarket upgraded radiators.
Coolers are labeled with a Class rating; the higher the Class the better the cooling... view full answer...
The closest match for your 2008 Chrysler 300 that we have is the Draw-Tite Hitch Cargo Carrier, item # 6502.
This carrier has a 20 inch by 48 inch deck and will handle up to 500 pounds. You will need to check the tongue weight capacity of your vehicle and hitch to be sure it will be able to carry the weight of your scooter and the weight of the cargo carrier at the rear of your car.
You will also need to measure the distance from the center of your hitch pin hole out to the farthest part... view full answer...
The only hitches made for the 2004 Chrysler PT Cruiser are Class I hitches like the Curt Class I 1-1/4 Inch Hitch # C11132. Class I hitches are rated at 2,000 lbs. gross towing weight capacity and 200 lbs. tongue weight. The weight capacity you will be able to tow is determined by the towing weight capacity of your vehicle. The Chrysler PT Cruiser has a low towing weight capacity and that is why there are no Class II or Class III hitches available for your vehicle. view full answer...
We do offer two light-duty Class I trailer hitch receivers for the 2008 Sebring hard-top convertible and both can be seen on the link provided. The hitch # 36448 that you referenced is not a fit for your convertible, only for the sedan version of the Sebring.
The correct Draw-Tite hitch is # 24871. I have linked an installation video for your reference as well as the written instructions.
Please note that according to a Chrysler Corporation document I located online not all versions... view full answer...
We do offer a light-duty 1-1/4-inch Class I trailer hitch for your 2008 Chrysler Sebring V6 Convertible, part # 24871. Please note that the part you referenced, Draw-Tite Class II hitch # 36448, is a fit only for the sedan, not your convertible.
If a bike rack or cargo carrier are in your plans please note that you must use a Class I-rated bike rack or cargo carrier. A Class I hitch is limited to carrying two bikes only - even if the rack holds more. Links are provided for both Class I... view full answer...
Yes, the Malone RunWay 3 Bike Rack # MPG2142 that you referenced has been tested and confirmed as a fit for your 2014 Chrysler Town and Country which has the factory spoiler at the top of the rear hatch. I attached a review video for this rack for more info as well.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide... view full answer...
WeatherTech does offer a rear cargo area floor mat that matches their 2nd and 3rd Row Rear Auto Floor Mats for the 2010 Town and Country.
The part is offered in three colors: gray (part # WT42265); tan (part # WT41265); and black (part # WT40265).
These custom-fit cargo area floor mats are made to precisely fit your specific vehicle; they grip the floor of the vehicle to stay in place and they have a textured surface to hold your cargo securely. A raised lip edge helps to keep any spills... view full answer...
Yes, I checked with Thule and the OutWay 3 part # TH56BV that you referenced is a confirmed fit for your 2017 Chrysler Pacifica so it would be a great option.
I attached a video for you to see all of its great features. It is the easiest to install of any trunk mounts that I have seen. view full answer...
I spoke with my contact at WeatherTech and he said they do not make a liner for this vehicle that can cover from behind the second row to the back when the third row is folded. WeatherTech does offer a rear cargo area floor mat that matches their 2nd and 3rd Row Rear Auto Floor Mats for the 2014 Town and Country. The part is offered in tan (part # WT41265). These custom-fit cargo area floor mats are made to precisely fit your specific vehicle; they grip the floor of the vehicle to stay... view full answer...
We do have Timbren helper springs for your 2001 Chrysler Town and Country. They are # TDVR05096. I have linked a video showing an example installation of these springs for you. view full answer...
I do have a solution for you, however the closest spacer block we currently have available to the dimensions you listed in your question is the Reese Spacer Block # RP3022. The size of this spacer block is 1/4" x 1" x 3".
If you are looking for replacement hardware for the trailer hitch on your 2017 Chrysler Pacifica, you will use part # RHK. You can type in the trailer hitch item number in the text box on this product page and it will give you the correct replacement hardware kit, including... view full answer...
While we do have trailer hitches that will fit and work well for your 2016 Chrysler Town and Country the Curt # C114123 isn't a fit as it's for Volkswagens instead. So I'd recommend the Curt Class III hitch part # 13364 for your 2016 Chrysler Town and Country as it's made in the USA, has a 2 inch opening which means it has great towing capacities and more accessories made for it, and because only the hitch opening hangs below the rear bumper so it's mostly out of plain sight. I attached... view full answer...
I do have a solution, but Inno has discontinued the fit kit for your 2017 Chrysler 300. Unfortunately, other fit kits will not allow you to install this roof rack on your vehicle. What I can offer instead is a Yakima roof rack like the CoreBar rack, which is similar to the # INXB108-115. You will need the following parts to complete the rack:
-Yakima CoreBar Crossbars # Y00421
-BaseLine Towers # Y28TR
-BaseClip Fit Kit # Y06110
The Yakima JetStream crossbars # Y00425 will work with... view full answer...
For a plug and play option, a powered taillight converter like the Curt # C55532 or the Tow Ready # 118462 are the only choices available.
If you wanted to do a hardwired application where the inputs for the converter would tap directly into the taillight circuits, I'd recommend the # C55532 from Curt. This converter would not have a connection to the vehicle's battery, but the fact that it draws power directly from the PT Cruiser's taillight circuits means that it won't offer the circuit... view full answer...
Yes, I have a few hitch bike racks that will fit your 2000 Chrysler Sebring Convertible. They will attach to a trailer hitch on your vehicle and be able to carry 2 bikes. The maximum number of bikes that your Sebring Convertible can carry will be 2 bikes. I am including a link to a page that will list the choices of hitch bike racks that will work on your vehicle.
If you need a hitch for your vehicle I would have the Curt Class I 1-1/4 Inch Hitch, part # C11187. This hitch is an easy bolt-on... view full answer...
We do offer trailer hitches for your 2005 Chrysler Town & Country Minivan. In fact for your van we offer three different classes of hitch, like Class II type Curt # C12362, and also 2-inch Class III types such as the Draw-Tite # 75305 that works with Stow-N-Go seats.
You can choose the hitch based on your intended purpose - whether to hold a cargo carrier or to pull a trailer - and also based on whether your van has the Stow-N-Go seats. The link provided will let you select your van style... view full answer...
Trunk mounted bike racks have to be totally removed before opening the rear hatch of a vehicle. The additional weight would make the struts that normally hold the door open unpredictable (most likely would fall) and a lot of the time the hooks would damage the body of the vehicle if the hatch was attempted to open since it would press against the vehicle.
If you wanted a bike rack solution that allows access to the rear hatch of your vehicle you'd need to go with a hitch mounted option.... view full answer...
We have a hitch for that vehicle. For the 2005 Chrysler Town and Country with the stow and go seats, I would recommend the Draw-Tite Class III Hitch, part # 75305.
We have a video showing the installation of this hitch, I will provide a link to the video below. view full answer...
In order to install a 5-pin connector on your 2012 Chrysler Town and Country van, you will need to have a 4-pin connector installed on your vehicle. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # C56331, plugs in vehicle's wiring harness which is behind your driver's and passenger side tail lights. Adding this wiring harness will allow a trailer to mirror your turn signals, brake signals, and running lights. Then you can add the Tow Ready 4 Pole to... view full answer...
Go To Results