The Derale Snap-In Radiator Adapter Fitting # D13035 that you referenced is not available in a 90 degree angle. If you need to have a sharp angle like this your best option is just going to be to create it using the flexible line on the other end of the fitting.
I have attached a short video review on this particular product that you can check out as well. view full answer...
A keel roller is not designed to carry the bulk of a boat's weight. That is the job of the bunks, whether they are wobble roller bunks like yours, standard roller bunks or carpeted bunks. Also, it is not a good idea to mount any of these boat support components to the trailer axles. Doing so would allow the forces from bumps to be transmitted directly to the boat's hull. All items that support the boat itself should be mounted to the trailer frame, which is then isolated from the road by... view full answer...
There is a simple plug in adapter that you can use that will fit the Voyager brake controller on one end and a port on the vehicle on the other end. It is # 3015-P. I have included a link to a video showing a typical installation on a similar vehicle.
Since you have a simple plug in option, you will not have to hardwire the controller to the vehicle. view full answer...
The A-Frame Trailer Jack - Topwind - 5,000 lbs. by Dutton-Lainson # DL22772 does not have a grease zerk fitting integrated, sor do any of our other top wind jacks. This doesn't mean they are difficult to maintain, but they do not have that integrated feature. Normally the bigger square topwind jacks do have that feature like # TJD-7000 as well as some of the side wind Swivel jacks.
I've linked the page to all your 5,000 lb Top Wind trailer jack options to assist. You can add the Replacement... view full answer...
Yes. The P at the front of your 275/55R20 tire size notation just means that they're tires for a passenger car and not a LT (light truck) or ST (special trailer), so they are the same sized tires. The reason they do not recommend using tire chains on your vehicle is the limited clearance in the wheel wells of your vehicle could create a situation where if a chain breaks, it can cause a great deal of damage to the suspension or braking components that are stored there.
If you wanted to... view full answer...
The Curt Front Mount Receiver, part # 31042 that you looked at will fit your 2500 Series Suburban if it is a 4WD model. For a 2WD model, use part # 31043.
To view install details for both receivers, click on the provided links. view full answer...
I checked with TorkLift and they do not produce a SuperHitch for the 1999 K2500 Chevy Suburban. I did some more investigation on the GM Heritage site and found that the K2500 Suburban is rated for a maximum of 10,000 pounds gross trailer weight. You can meet this capacity by using Curt trailer hitch # C14029. I have linked a video showing an example installation for you. view full answer...
You can order the full set of the Gen-Y # 325-GH-R72 and then an additional ramp with # GY96FR, which would give you 3 total ramps. These ramps are 72" long and have a capacity of 3000-lbs each. view full answer...
Yes, since the transmission coolers are not fit guided the 6.0 liter coolers will work with your 2007 Chevy Suburban with 5.3 liter motor.
I recommend you measure the space you have for installing a transmission cooler to gauge which cooler will fit best. Select the correct transmission cooler by determining where there is enough space to mount it. The best three positions to mount the transmission cooler in order. At Position A, where the transmission cooler is 100% efficient, mount the... view full answer...
I contacted our representatives at CIPA Mirrors and Longview Custom Towing Mirrors and the 2015 Chevy Suburban has not yet been a confirmed fit for custom towing mirrors. 2015 is the beginning of the 12th generation of Suburbans.
An option to consider is the K-Source universal towing mirror # KS3891 or the CIPA universal dual-view towing mirror # 11953.
The K-Source universal towing mirror # KS3891 is extra-large and uses a ratcheting strap system which creates a snug fit. It's a tool-free... view full answer...
I spoke with my contact at WeatherTech to determine why custom mats or liners are not available for the third row seating on your 1999 Chevy Suburban. Bascially she told me that there is not enough demand for them so they never made any for the third row.
She did say that you can use the all-weather mats in black, # WTW25, gray, # WTW25GR, or tan, # WTW25TN. view full answer...
There sure is! For a locking anti-rattle hitch pin/cable lock combo, use # S64031 or for the hitch pin only, use # S64029. I've linked to product description videos for each part. view full answer...
We offer a wide range of trailer axles, hubs, brakes, wheel and tires. I have included links to all product pages for you.
New hubs need to use the same bearings as the ones being replaced. This ensures the new hubs will fit on your spindles. You also want to choose hubs that have the weight capacity needed for the axle and the same bolt pattern as used by the wheels/tires you want to install. You can check the axle for a sticker that indicates its capacity.
One thing you'll want to note... view full answer...
We do have the K-Source Snap & Zap Custom Towing Mirrors, # KS80920 that are confirmed to fit the 2015 Chevrolet Suburban with OEM mirrors. They will match the contours of your factory mirrors and retain use of puddle lamps and power folding functions if your vehicle is equipped with these options. view full answer...
The closest thing we have to a version of the Oval LED Trailer Clearance, Side Marker Light # MCL31RB that you referenced with a black base in an amber and red lens would be the Red Oblong Trailer Clearance, Side Marker Light # MC31RB and the Amber Oblong Trailer Clearance, Side Marker Light # MC31AB.
Both these lights have black bases, but they have incandescent bulbs instead of LEDs. view full answer...
The Thule Caprock Platform Truck Bed Rack for Xsporter - Aluminum - 59" Long x 75" Wide # TH45YE actually comes with 4 of the Xsporter Pro adapters. However, they are available separately which is part # TH28YE. view full answer...
Yes, we have confirmed that the etrailer hitch part # e25TR is a fit for your 2024 Subaru Legacy. This is a Class III hitch with a 2 inch opening that is mostly hidden. view full answer...
Yes, we do! The T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, code # C55319, is a custom-fit for the 1993 Chevy Suburban. We also have a video that walks you step-by-step through how to install it.
If you will be towing a trailer that has a 7-pole or 6-pole plug, we have kits that make upgrading a breeze. The Brake Controller 7 and 4 Way Installation Kit - 10 Gauge, code # ETBC7, or Brake Controller 6 and 4 Way Installation Kit, 10 Gauge, code # ETBC6, has all the parts necessary... view full answer...
We do indeed offer folding steel hitch-mount cargo carriers for your Suburban's 2-inch factory hitch but an anti-rattle hitch stabilizer/lock will be an add-on accessory item. You can use the anti-rattle lock # e99047 which is shown in the linked video.
The link provided will take you to our main page for all folding steel flat hitch carriers. These vary in their dimensions and weight capacities.
Please note that the tongue weight capacity of your hitch should be indicated on its safety/warning... view full answer...
I have a solution for you, but the switch itself is not available as a replacement part on the Optronics # RVPL7CB. For that reason, your best solution is going to be replacing the light with a new one. view full answer...
Go To Results