Hi David,
The Saris Door County Bike Rack for 2 Electric Bikes # SAR42RR does require a 2" trailer hitch receiver tube opening in order to mount. Hitch pin holes for a 2" hitch are typically 5/8" in diameter. The anti-rattle hitch pin lock # SA3022 included with this rack has a 7/16" thickness and threads into the shank of the rack to clamp it to the receiver tube and prevent any movement/rattling. As long as you have a 2" trailer hitch receiver you'll be able to use the Saris Doo County... view full answer...
David, you simply need the Fastway e2 Weight Distribution Shank # FA92-02-4315 to replace the Shank # FA92-02-4100 which came with your Fastway e2 Weight Distribution Hitch # FA94-00-0800. The shank included from Fastway maxes out at a 4" drop while the extended Shank # FA92-02-4315 allows for a drop of 6" to 9-3/4". This will allow you to level your trailer properly. view full answer...
Hi Melissa,
The Curt Trailer Hitch Receiver # C13391 is just the hitch and would not come with the necessary wiring for towing a trailer. For your 2018 Alfa Romeo Stelvio you would need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118777. This wire harness plugs inline with your factory tail light wiring to transfer your light signals to the tail lights on the trailer. view full answer...
To secure the Trailer Valet MV PRO item # TV96FR hitch ball to your trailer's coupler you will want to remove ball from the valet itself and attach it to your trailer using the coupler lock. Then you will come in with the included wrench and tighten it all the way up so it is secure. Once you've completed these steps you'll lower it onto the Valet.
We demonstrated this using a different model Trailer Valet and I have linked the video below. It's the same process for the hitch ball so... view full answer...
Sandra, what you're going to need to do is adjust the hitch to redistribute more of the weight to the front of the truck. I've included a video that shows how the hitch will redistribute the weight when installed properly and an instruction link showing how to adjust the hitch head which starts on page 14. view full answer...
Hi Nichole,
The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT38GR doesn't come with a wire harness included so you would need to pick up the Tekonsha T-One Vehicle Wiring Harness # 118467 for your 2015 Subaru Outback. This wire harness will only take a few minutes to install, just pull up a few pieces of trim in the rear hatch area and plug it right in. I've attached a video below where Randy will walk you through the installation process. view full answer...
There isn't a completely hidden hitch for your 2024 Volkswagen Tiguan however we do have the Curt Trailer Hitch Receiver # C13381 which is going to be your best bet.
All of our hitches for your vehicle are going to be around the same visibility wise, but the Curt # C13381 is in my opinion, a bit more recessed than the others.
This hitch has a 3,500 lb weight capacity, a 525 lb tongue weight capacity, and has an easy bolt on install using the included hardware. view full answer...
No, sorry you can not. The 2" receiver that comes with the Stealth Hitches item # SH27FRT can only be used for accessories like bike racks and cargo carriers. It's only been built to withstand the vertical force put it on by accessories.
You'll have to use the included ball mount to tow. There's no other options or any way to do any height adjustments with the hitch.
The Stealth Hitches item # SH27FRT has been confirmed to fit the 2021 Volvo XC90 Recharge. I have linked an installation... view full answer...
Hi Vanessa,
We can definitely get you a 2-bike rack for your 2020 Dodge Challenger, and I'm going to assume you need a hitch to carry the rack as well. If that's true the correct hitch for your '20 Challenger is the Curt Trailer Hitch Receiver # C13236.
Then for a bike rack, my favorite that will work the best for your Challenger is the Hollywood Racks Destination Bike Rack # HLY94FR.
What I really love about the Destination # HLY94FR is the value it gives you; it isn't wildly expensive... view full answer...
You really should use a weight distribution hitch like the Equal-i-zer # EQ37060ET when towing a travel trailer. You should touch base with the person or company you are renting the trailer from as they will typically have these already setup for the trailer and is often included with the rental. If they are not offering it with the rental you should check with other rental companies near you as they are the best especially for new campers. The weight distribution hitch helps to more evenly... view full answer...
Due to having the cutaway chassis on your 2011 Chevrolet Express 3500 you are going to want to look at either the Draw-Tite Receiver # 41990-07 with 7" mounting brackets or the # 41990-16 with 16" tall mounting brackets. The height of the brackets will depend on the height of your frame from where you would like the receiver to sit. These can be bolted on but welding is the preferred method.
You will want to check your wiring to see if it included the round connector for a 7-Way # 30955... view full answer...
Hi Russ, thanks for all of the details and photo!
For your application it will be best to get a whole new 14K Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37140ET. When I sent your photo over to my contact at Equal-i-zer he said there are a few things that are concerning like the shank is not one that came with the hitch head and there is some hardware missing like the sleeves where the bars install on the hitch system.
Getting a whole new system gives you a whole... view full answer...
Hi Dave,
Yes, the Mounting Bracket 4-Pole Flat # 18144 does come with mounting holes pre-drilled so you can mount the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56394 on it for your 2020 Chevy Traverse.
I believe that's what you were asking, but if you were asking about if the # e56YR hitch or harness has any holes, then no it does not. view full answer...
Thanks for the pictures! No, I am sorry Richard you can not. The B&W Continuum item # BW78FR only works with frames that are 5" and 6" tall. Instead, I recommend using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control item # EQ37100ET.
The Equal-i-zer item # EQ37100ET has a tongue weight range of 600 lbs - 1,000 lbs so it would be perfect for your car trailer. This system has built in 4-point sway control that will keep your trailer in line with your truck when you make... view full answer...
Hey Danny I would be happy to help you! Unless your 2015 Sandstorm 5th wheel trailer has a Lippert Rhino Pin Box which says Rhino Box on the side I am going to need to see the sticker on your pin box. It'll have some of the following or all; a serial number, RPO number, LCI number and some other information on capacity. If you could email me this directly I would be happy to find the right Gen-Y Gooseneck Pin Box for you.
Now, if you have a Rhino Box you'll need the Gen-Y Hitch 5th Wheel... view full answer...
Well Brent that is certainly a valid concern, because the Dexter DX7.5L A-60 Brake Actuator # DX29FR does not have any kind of built in safety cable connections. In fact very few of the surge brake actuators that we carry will have cable connections. In most cases the safety cable connection will be part of the trailer tongue itself and not part of the brake actuator (example pictured below).
As far as getting you a cable connection point, it could be as simple as putting a hole a bit... view full answer...
Go To Results