We have the replacements for the knob of your Thule Apex XT, part # TH9024XT, here.
For the knob itself, you will need the Replacement Locking Knob for Thule Bike Racks, part # TH79JV. I've linked to a video review of this below.
Since you didn't have this to begin with, you will also need the One-Key System Lock Cylinders, part # TH450200. I've linked to a video review of this, too.
If you still need additional components, let me know. These are the only available. view full answer...
I just spoke with Torklift and their EcoHitch Hidden Trailer Hitch item # 306-X7350 hasn't been tested on the 2024 Impreza's yet but is expected to fit due to there not being changes from the 2023-2024 model year.
The EcoHitch Hidden Trailer Hitch item # 306-X7350 is a class III hitch with a 2" receiver. This hitch is designed to fit the 5-door wagon or hatchback with single exhaust.
I have linked an installation video below so you can see how to get it set up.
I just heard back that... view full answer...
Thanks for reaching out, Peter!
The older Thule Podium Roof Mounted Foot Pack TH460 worked with the older style of Thule square crossbars, which is actually a good thing!
When Thule released their Evo line they changed how the square bars install but we've found that the Inno square bar feet are compatible with those older Thule square bars so you'll need the following parts depending on whether your 2020 Subaru Impreza has raised rails or a naked roof:
Raised Rails
- Inno Feet # INFR
Naked... view full answer...
With your 2017 Subaru Impreza Limited being a sedan you are going to be limited to a 1-1/4" receiver like the Curt # C11466. The EcoHitch # 306-X7350 is only a fit for the 5-door wagon with a single sided exhaust like you see in all the images on our site. We do have some Adapters # HTAD or # HT5R which will give you a 2" opening but understand these will reduce your tongue weight capacity by 50% due to the additional length of the assembly.
We do have a Weld-On 2" Receiver Tube # E17... view full answer...
Hi Ian,
Yes, your 2024 Subaru Impreza sedan base model is compatible with and can use the Curt Trailer Hitch Receiver # C11466.
The hitch will fit and there is no type of modification or cutting needed for the bumper fascia, it will be in tact.
The only other thing I wanted to mention is that if you also need a trailer wiring harness, the correct fit for your '24 Impreza sedan is part # C56212. view full answer...
The Curt # C111203 you found is for the 2008-2014 Subaru Impreza wagon. Since you have a 2015 I would recommend the EcoHitch Invisi Trailer Hitch Receiver # 306-X7211 if you have the removable knock out panel on your rear fascia. This will give you the more popular 2" receiver opening and since it sits above the bottom of the fascia you will not have to worry about any reduced ground clearance or departure angle for tall curbs.
If you do not have the removable panel on your rear fascia... view full answer...
Go To Results