Since you've already enough going on up front on your 2018 Lance 1995 Travel Trailer, I recommend instead using a hitch mounted bike rack.
If you don't already have a hitch on your trailer, you can easily add one with the Curt Adjustable Trailer Hitch Receiver # C13701, which will fit trailer frames ranging from 18"-51" wide.
For a bike rack, the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY74FR will work great.
This bike rack is capable of carrying up to 2 bikes,... view full answer...
Hey Niles, so we have a version of the Rhino Rack Pioneer Platform that was designed to fit factory crossbars with the part # RR92TB which would work great for you and measures 52 inch by 54 inch by the version you mentioned does not have a universal hardware solution that would adapt it to your current roof. view full answer...
I highly recommend looking into the Flint Hill Goods 30x50 cargo/Wheelchair Carrier w/ 48" Long Ramp - 2" Hitches # FHG77ZR as this is by far the best option for you. I really like this carrier because it has a 48" long folding ramp and is the lightest that we carry. It is made of steel and weighs 80 pounds, but still has a capacity of 500lbs. The inside dimensions are 48" long x 28" wide x 5" deep. This carrier can also be folded up all the way when not in use, giving you extra room... view full answer...
On the Bearing Buddy Bearing Protectors # BB1980A-SS air more easily pushed past the internal O-Ring which means the grease is going to try and push all the air out from inside the hub. It is important to remember you want to try and fill the bearings and hub completely before installing the Bearing Buddy. You should never rely on the Bearing Buddy to fill bearings with no grease inside them. view full answer...
Yes, the Curt TruTrack 2P Weight Distribution System w/ Sway Control # C69JR will work with your Jayco Eagle travel trailer. From what I saw the GVWR of this rig was a hair above 7,000 lbs, so the 800 lb - 1,000 lb tongue weight range is perfect for your travel trailer.
The # C69JR comes with literally everything you need for set up and will give you both leveling and sway control to make your ride much more enjoyable. view full answer...
We do have a wireless camera system that use your smartphone or iPad as the display so there is no need to mount a monitor in the passenger compartment. The Rampage Wireless Backup Camera # RA7710 features a rechargeable battery-powered camera with a magnetic mount for quick and easy non-permanent installation when you need it. This means no wiring and that you can put the camera just about anywhere you need it.
The Rampage has a 300-foot transmission distance too so it will work fine... view full answer...
Hey Chuck,
Malone has a spare tire and mount for the Malone EcoLight Sport Trailer for a Heavy Kayak # MAL73FR with part # MAL33FR. It's just a simple U-bolt that you'll use to clamp the wheel to the frame of the trailer, just like the picture below. view full answer...
Yes, the Curt Custom Base Plate Kit # C36JR is confirmed to fit your 2020 Ford Expedition 4wd. It will also allow for you to use a Blue Ox Tow Bar # BX7420.
Do ensure you install a Charge Line Kit # RM-156-25 as the battery will while being flat towed and from a Braking System # SM99251 you are going to be required to have.
If you need help with the installation you can use the find an installer link near the bottom of the page. Also let me know if you need any additional help figuring... view full answer...
Hey Chuck,
The rails on your Expedition are unfortunately too large for the Malone # MAL84AR to properly clamp to so you'll have to go with another roof rack in order to get a large enough crossbar to get a 4" overhang. I recommend the following components from Inno:
Inno Aero Crossbars - Aluminum - Black - 60" Long - Qty 2 # INXB153-2
Inno Through Feet for Aero Crossbars - Raised Side Rails - Qty 4 # INXS150
The 60" crossbars should give you roughly 4-1/4" of overhang on each side... view full answer...
Hey Brian,
That is correct, manufacturers do not offer a bolt-on trailer hitch receiver for 2011 Ford Expedition models. You'll have to go with a weld-on hitch and would need to measure the distance between your frame down to clear the bumper so that you can choose the correct drop:
Draw-Tite
7" Drop # 41990-07
16" Drop # 41990-16
Curt
3" Drop # 15901
9" Drop # C47CR
10.865" Drop # 15902
11-1/2" Drop # 15903
18" Drop # C99CR view full answer...
The Opti-Brite LED Strip Light for RVs # ILL78CBB is not DOT-approved. Strip lights like these are not going to be DOT approved as they are considered interior or general use lights. view full answer...
We can get your 2022 Ford Expedition set up to be flat towed behind your Prevost motorhome with air brakes, and there are a number of parts you'll need, which I'll go ahead and list out for you below. The only thing to note is that there are no base plates that fit the Timberline model of Expedition, but all other models can use the base plates:
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-524431-5
- Tow Bar: Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676
-... view full answer...
Hi Chris; your 2022 Ford Expedition will have a Normally Closed application, and it is possible when installing the Roadmaster Brake-Lite Relay Kit # RM-88400 that you'll need Hy-Power Diode # RM-790.
I can't say for sure because it's really dependent on the vehicle and type of wiring you use. You'll need to test by turning on the headlights and testing for voltage at the red wire of the relay. If there is voltage use # RM-790.
As for the wire color, per Roadmaster, the 2022 Expedition... view full answer...
The MORryde RV Door Latch Extender # MR22JR is not going to work on the Lippert G glass entry door because the entire door is glass and it uses a euro style door latch. I have not seen any entry door assists compatible with the Euro style door latch. view full answer...
Go To Results