Expert Answers about Chevrolet Cruze

• Is The Curt T-Connector # C56214 Compatible With An Aftermarket Sound System And LED Lights
• The Curt T-Connector # C56214 will bypass all of the vehicles wiring. So any wiring for your sound system or LED lights will not be affected. There is virtually no additional amp draw on the tail light circuits. The T-Connector does require that you run a wire directly to the battery for power, so as long as you do wire it directly to the battery and not to any other power source you will be fine.
  view full answer...


• Mounting Bolt Size for the Rhino-Rack Ski and Snowboard Carrier
• Hey Greg, you're looking for the Replacement M6 x 32 mm Button Security Screw for Rhino-Rack Accessories # RR33UB. You're also going to need the flat washers # RR63TB and the M6 nuts # RR69TB as well.
  view full answer...


• Recommended Bike Rack for a 2012 Chevrolet Cruze With a Class I Hitch
• Hey Matt, so whenever you use a hitch extender with a hitch you'll effectively reduce it's capacity by 50% and unfortunately class I hitches don't have much capacity to begin with so that'd basically leave you with no capacity. Really you need to swap out your current rack with one that will work with your class I hitch # TH934XTR which would work with your hitch and allow you to carry all your bikes without sacrificing any capacity.
  view full answer...


• Draw-Tite Sportframe Ground Clearance On 2018 Chevy Cruze Diesel Hatchback
• Yes, the Draw-Tite Sportframe Trailer Hitch Receiver # 24951 will fit your 2018 Chevrolet Cruze Diesel Hatchback. The distance from the ground to the inside edge of the receiver tube measures 9-1/4". Since you will be towing you will also want the Curt # C56354. Once installed, you will have a 4-way at the rear of your vehicle to power your trailer's signal lights. If you need a ball mount you can use the Draw-Tite Drawbar # 3593. For a 1-7/8" ball you can use the # 19256 and for a 2"...
  view full answer...


• Recommended Hitch for a Mobility Scooter on a Chevy Cruze
• No, it wouldn't. The Curt Trailer Hitch item # C11282 has a maximum tongue weight capacity of 200 lbs. Your scooter and rack would need to be under this combined and you're 12 lbs over. If you could remove some weight off of the scooter to get it at or under the 200 lbs capacity this hitch could work. You really don't want to exceed your vehicle's capacity. The Curt Trailer Hitch item # C11282 fits the 2011 - 2015 Chevy Cruze. The only other option available is the Draw-Tite item # 24882...
  view full answer...