Hi Andrew,
Based on what you're describing it sounds like you have the Curt Adjustable 2-Ball Mount # C45902, which is compatible with the Curt Pintle Hook with 2-5/16" Hitch Ball # C45922. This is also rated for 20,000lbs and the 2-5/16" hitch ball can be swapped out with a 1-7/8" # C48810 or 2" # C48820 hitch ball if needed. view full answer...
The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391SUOB20T should have a snug fit as the stainless steel block the hitch is inserted into was designed to not deteriorate over time. Be sure to look at the Ball Mount # 391BMU3S as if all the paint over the part has come off this would create a slight gap and cause some of the noise. You could recoat it to remove some of the play. Also be sure to check the bolts holding the block to the receiver as this would likely be a... view full answer...
Hey Rob,
Yes, the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 would be able to mount to the gooseneck ball in your B&W Turnoverball hitch. You'll just need to remove the coupler pin and drop the base of the hitch down on the hitch ball and then you can replace the pin. You will also need to tighten the bolts of the front of the hitch to fully secure it to the hitch ball and prevent rattling. view full answer...
The B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate # BW44FR, and other options like it, don't come with a tab for an anti-sway bar but we do have the Curt Weld-On Sway Control Tab # C45822 which you can use to modify the B&W ball mount to fit your towing application.
B&W didn't add provisions like this so you'll want to make sure to think about how you'll use the ball mount prior to welding this tab on so you get it in the right place the first time. I recommend having... view full answer...
Hello Jason, that is a great question. I just spoke to my contact at Gen-Y and they informed me that yes, the Gen-Y Hitch Gooseneck Trailer Hitch # GY73XR can be mounted to move the ball closer to the cab. As long as your OEM puck system has all 5 holes, and the distance from the rear two holes to the center hole is the same as the distance from the front two holes to the center hole. Basically, they said as long as it fits into the pucks, you can use it whichever way you want. view full answer...
Hey Cameron,
I was finally able to get my hands on the Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch # BLU25XR and found the spacing to be 1-7/8". view full answer...
Yes, the Pintle Lock for BulletProof Hitches Adjustable Ball Mount # 358Pintleattachment is compatible with the # ED256 when using the 2-5/16" ball. view full answer...
Hey Wes, thanks for reaching out!
The 20K Curt Adjustable 2-Ball Mount - 2-1/2" Hitch # C79NR is only available with the 2-Ball platform but I do have an alternative solution for you with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-623.
This is a a different design than what we normally see with a ball mount, but it has the dual hitch balls as well as a piece that inserts into one of the receivers to make it compatible with a pintle hook setup. The Gen-Y products are... view full answer...
The Greaseless AlumiBall # AM3453 is only going to fit on a Rapid Hitch Adjustable ball mount like the Kit # AM3410. Your Weigh Safe is going to use a different style hitch ball. And they do not offer a greaseless ball for that setup currently. view full answer...
Hi Wayne,
The TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers # TLE1536 is designed only to be used with TorkLift SuperHitch trailer hitch receivers and would not be a fit with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-623. You would need the TorkLift SuperHitch Original Trailer Hitch Receiver # TLF1002 on your 2015 F-350 in order to use the # TLE1536. view full answer...
Yes we do, the Curt Class III ball mount # C45020 that you referenced has a 5/8 inch diameter hitch pin hole. This is the standard size for ball mounts that fit 2 inch hitches. view full answer...
The Stealth Hitches Hidden Rack item # 391KIATELL20 you ordered doesn't have a class rating because it is not capable of towing. It is only for accessories that fit 2" receivers like bike racks and cargo carriers. This 2" receiver has a 600 lbs tongue weight which is comparable to class III hitches.
If you want to tow with this hitch you'll need to add the Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver - 2" Ball item # SH53GR. view full answer...
Hey Bryce,
You can use weight distribution on a 2024 Toyota Grand Highlander so long as the hitch is rated for use with weight distribution, so the frame isn't an issue. For the '24 Grand Highlander you would be able to use weight distribution with only one hitch that fits, the Draw-Tite Max-Frame Trailer Hitch Receiver # DT95PR.
The other hitch that fits, the Curt Trailer Hitch Receiver # C26VV is not rated for use with weight distribution, but you could still add sway control by using... view full answer...
Hey Skylar,
The B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W mounts into B&W's proprietary square-tube Turnoverball hitch and there are no adapters for this hitch to work with an standard gooseneck hitch. If you removed the gooseneck hitch you could install the # BWGNRK1111 in order to use the Companion. The other option would be to sell the Companion and put the money towards a hitch like the Demco Recon # DM8550045 you were looking at.
This hitch mounts to a gooseneck hitch... view full answer...
We do have the Stealth Hitches Receiver # SH44VR or Receiver with Towing Kit # SH88VR that are confirmed to fit your 2011 BMW 335xi e90 sedan. The receiver only version is only designed to be used with hitch mounted accessories like a bike rack while the other also includes the ball mount and wiring for towing a small trailer. view full answer...
Hey Ward, thanks for reaching out!
The Blue Ox Adjustable Drop Hitch Receiver Adapter # BLU34TR does not have an adapter that fits to make it compatible with towing because this was designed for flat towing situations.
For your application I recommend using the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers # 325-GH-524 because it gives you the height-adjustability that you're needing, as well as the dual ball mount setup you're needing. view full answer...
Hey Jason, a 3 inch wide ball mount platform is going to be too wide for the Curt Rockerball part # C29FR to fit. The max it can fit is 2-1/2 inches. view full answer...
Yes, the Curt # C13281 will fit your 2020 Kia Sportage. If you would prefer it in matte black the # e72TR will also fit. These share the same design with the only difference being the finish. If you plan on towing you will also want the # C56321 for 4-way wiring and the # C45534 for a ball mount. view full answer...
Hi Frank,
Are you saying you want to use the Ultra-Fab Steel Roller for RVs with 2" Trailer Hitches # UF48-979020 on a Blue Ox ball mount with a drop or an adapter kind of like the # BX88132? It would work with the # BX88132, but if you want to send me some pictures of where you're wanting to connect it I can confirm whether this would be the right fit or not. This specific roller is designed to fit 2" receiver tubes and be secured in place with a hitch pin and clip. view full answer...
Hey John,
The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BWRVK3500 has a square shank which is proprietary to B&W and would not fit in a round factory gooseneck hitch. If your F-350 came with the puck system/gooseneck hitch (total of 5 holes in the bed) then you could go with the B&W Companion OEM # BWRVK3300 and drop it into the pucks.
If it's just a standard gooseneck hitch then you can go with a hitch that mounts on a gooseneck ball like the Demco Recon 5th Wheel... view full answer...
Go To Results