Hi Marty; to answer your question, the SnapPad SnapJack SJ for RV Scissor Jack Stabilizers # SN65FR will work for your 9,200 lb trailer, yes.
The specs aren't actually for the SnapPads themselves (which I know is a bit confusing). The # SN65FR will fit scissor jacks that have individual capacities for 5,000 lbs to 7,000 lbs. For example these will fit the Lippert Scissor Stabilizer Jacks # LC285344 which have a 5,000 lb per-jack capacity. view full answer...
I would have to know exactly what jacks you have on your 2023 Jayco Greyhawk to determine if the Replacement Foot Pad # LC324269 will fit. This is specifically for the Lippert Hydraulic Ground Control Leveling System. view full answer...
Yes, they will! Base Camp is a Lippert product and the SnapPad XTRA Jack Pads for Lippert Leveling Systems item # SP54FR4 have been designed to fit 9" round jack feet. view full answer...
Hey Frank,
We would need to know the diameter and shape of the footplate for your tongue jack in order to find the correct SnapPad to fit it. view full answer...
It sounds like you are needing the SnapPad EQ Compact Jack Pads for Equalizer Leveling Systems # SP24FR4. These fit the 7" EQ leveling system legs which are considered to be square with the corners cut off. They consider them squares since the lengths of each side are not all the same. view full answer...
I checked with SnapPad, and they don't list any specific fit for a 2011 Thor Hurricane 31G. They said you have to know the exact leveling system type you have and measure the feet. Most likely you have the Lippert leveling system, but you still want to check and verify what you have.
If you do have the Lippert and four 9" round jack feet you'll need the SnapPad XTRA Jack Pads for Lippert Leveling Systems # SP54FR4.
If you have the Lippert and two 9" round feet and two 12" round feet you... view full answer...
If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet # SN76FR will work great.
If not, you're going to have to measure your jack feet and take note of it's shape and let me know what you've got and I'd be happy to help. view full answer...
I believe you will actually need the SnapPad XTRA Square 6 Jack Pads for Lippert Leveling Systems # SN99FR for your 2024 Salem Cruise Lite 263BHXLX. But you will want to measure your pads to verify as I have no way to see exactly what stabilizers you have and Forest River cannot tell me either. These pads will fit feet that are 5-3/4" to 6" square while the Pads # SN68FR you found are going to fit 5-1/2" to 5-5/8" square feet. view full answer...
Hey Kevin, so unfortunately Ark does not make a drill adapter for the Xtreme Off-Road Swing-Up Trailer Jacks like your # ORJW350D. The only option would be to have something fabricated to fit, in which case the socket would need to be shaped something like the picture below with two flats on either side of a circle. Like you said, the jack would require a pretty unique shaped socket, which means that none of the other drill adapters we carry are going to work. view full answer...
Hey Pat, thanks for reaching out and the photos!
The Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets # MO22FR looks like it will work on your application, but you'll need to more your rear jacks around to make more room, and cut off the welds to allow the brackets to fit.
Aside from that you can go with a whole new bumper or have a welder reinforce your current bumper.
If you don't already have a hitch receiver on your trailer then I recommend checking out the etrailer... view full answer...
Hello Janet. That is actually a really good idea for a product. Unfortunately, MOrryde does not make any kind of rubber boot or cap to go on the feet of the steps. The idea is to protect the foot, keep them from getting scratched and increase friction, right?
I feel like coming up with your own rubberized protector would not be too hard. I have seen rubberized tape like "flex tape" at stores. I would cut a piece of that to fit the bottom and/or sides of the foot. This way the foot will... view full answer...
The best bike rack for e-bikes that is also rated for a 5th wheel trailer is the Hollywood Racks RV Rider item # HLY64FR. This bike rack has an 80 lbs per bike capacity. It also fits tires up to 5" wide.
One of the reasons the RV Rider Bike Rack item # HLY64R is the best for not only a 5th wheel trailer but for e-bikes in general is the attachment method. It uses padded clamps with hand knobs that hold the bikes securely by the frame or seat post. This mounting method avoids any fenders... view full answer...
Hi Brian,
The MORryde 5th Wheel Cross Brace Landing Gear Stabilizer # MR72AR mounting brackets require a square tube design in order to install so these braces won't be a fit for your round tube landing gears. Instead you'll need the JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear # LC191023 or # LC191024 (Less Than 58" Between Landing Gear).
In the video attached below Brad installed this system on a round tube system by using adapters # LC314592... view full answer...
The VueSMART is compatible with newer Chevy trucks, but the Chevy/GMC trailer wiring power is just a mess, and camera systems are hit or miss on them. They don't give the full power to the running lights and 12 volt which cause all kinds of issues. Generally, an adapter will do the trick, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera # FR87PR.
This gives the right level of power to the trailer wiring, and it should be the fix you need. I can't absolutely guarantee it... view full answer...
Go To Results