Hi Cheryl,
Since a 2021 Aliner Ranger 12 camper doesn't come with a steel 4" x 4" bumper you'd have to have one welded to the frame before you'd be able to mount the The 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR. You'd need at minimum 1/2" of clearance between the body of the camper and the bumper in order to get the mounting brackets for the carrier in place. You'll also need to check with capacity if the bumper with whoever welds it into place to ensure that it's strong enough... view full answer...
No, it really isn't but I have a solution. The MORryde RV Generator Slide Out Tray item # MR79RR is designed to be mounted in storage compartments. It needs a sturdy base to support the weight of your generator and you're not going to be able to get that mounting it to the bumper on your OutDoors 5th wheel trailer.
Instead, I recommend the Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers item # MNT34FR. This bolts directly to square RV bumpers that measure 4", 4-1/2", 5-5/16",... view full answer...
The closest carrier we have to those dimensions is the 20" x 47" Reese Cargo Carrier item # 63155. Another issue you're going to encounter is that a 2015 Kia Soul only has a tongue weight capacity of 200 lbs. That weight has to include the carrier which in this case weighs 44 lbs. The 19x47 Curt Cargo Carrier item # C18110, you were looking at, comes in a little lighter at 33 lbs. view full answer...
Hi Steve; we may have what you are looking for, depending on the size and weight of your generator. There is one option for a 2-bike rack that also has a cargo carrier, from Swagman:
- Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR
The # S69SR can carry a pair of bikes up to 60 lbs each, so it will definitely hold both of your 50 lb ebikes, and the cargo carrier has a 100 lb capacity. The carrier measures 50-3/4" long x 17-1/4" wide, so you'll need to compare that to the size... view full answer...
Hey Debbie, the closest in length cargo carrier is the Reese part # 63153 which is 60 inches long and 24 inches wide.
To get closer to the width you'd want the Flint Hill Goods part # FHG67GR which is 29 inches wide by 50 inches length. view full answer...
Hi Mark; I verified directly with Inno the total combined overall weight is 60-1/2 lbs of the 39x25 Inno Cargo Carrier with Removable Cargo Box for 2" Hitch # IN94MR.
The cargo box alone weighs 25 lbs while the base weighs 35-1/2 lbs. view full answer...
While the Curt Trailer Hitch Receiver # C55HR is confirmed to fit your 2024 Kia Forte it is only going to have a 1-1/4" receiver opening. And while there is an Adapter # HTAD which will change it over to a 2" receiver opening this does reduce the tongue weight capacity of the receiver by 50% which would only end up as 100lbs for the Curt # C55HR.
We do have a 1-1/4" Cargo Carrier # C18110 but it does not have a ramp. This carrier weighs 30lbs so it would allow for 170lb electric wheelchair... view full answer...
Possibly leaning towards most likely but I do not have a Telsa Model Y in front of me to see. What I can do is give you the height of the 39x25 Inno Cargo Carrier with Removable Cargo Box item # IN94MR so you can confirm whether or not you'll be blocking your plate and/or camera. The top of the cargo box sits 22" above the top of your hitch receiver. It measures 63-1/2" long x 28" wide x 15-3/4" tall.
If your plate is blocked and this is something you're concerned with. You can use the... view full answer...
Hello Martin, so I went ahead and double checked with Yakima, and the 18" measurement you saw is the actual clearance. This is measured from the top GearWarrior platform, as in the surface your gear would sit on, to the bottom of the TopShelf arms. So, a cooler for example, would need to be less than 18" tall to fit on the GearWarrior Cargo Carrier # Y37VR. Also, I was able to track down the interior dimension of the GearWarrior Cargo Carrier, which are 21" wide and 54.39" long. I made... view full answer...
Hey Tom!
The overall dimensions of the MORryde RV Cargo Sliding Tray - 48" x 42" # MR73FR are 48" long x 42" wide x 6-5/8" tall (see attached) - this is for the tray and the rails when they are assembled and installed together.
Since this is a bit longer than what works for you I recommend picking up the Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly # LC370782 and pairing it with the Tray Trim Kit # LC370690 which gives you more of a custom setup that will fit within... view full answer...
To find the answer to this question I really recommend measuring on your vehicle. We installed both the # DT58MR and # EH39FR on the 2022 model and the distance from the hitch pin hole to the edge of the bumper was 5". Assuming you have one of these two hitches that should be enough to use the # C18113 with 6" from the hitch pin hole to the closest edge of the carrier. It expect it to be the same on the 2023 but it is a good idea to double check with a tape measure. If you have a factory... view full answer...
Hey Steve, yeah if your RV hitch has a capacity of 300 lbs you wouldn't be able to carry a 300 lb motorcycle as you'd have to also factor in the weight of the motorcycle carrier. For example our lightest carrier is the etrailer part # e56UR which weighs 47 lbs. So the max motorcycle weight you'd be able to carry would be 253 lbs. view full answer...
What you have there is a Curt class 3 trailer hitch. You are correct that it is the standard 2" receiver. This is very common to see on the Ram Promaster vans like your 2021 Winnebago Travoto.
The Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers # Y74ZR will indeed be compatible with your Curt hitch. The main thing to be aware of here is the weight capacity. Your Curt hitch is rated for 350 lbs of tongue weight. The EXO system with two cargo boxes weighs 157 lbs. This... view full answer...
The 525 lb max tongue weight and 3,500 lb max gross trailer weight rating is what the # e98848 is capable of. Many aftermarket Class III hitches are able to handle more weight than the vehicle they are designed for. Occasionally the towing capacity of the vehicle exceeds the capacity of the hitch. Whatever the case may be, you are always limited by the lower capacity. In this case, you are limited by the weight capacity listed in your 2024 Honda CR-V owner's manual. view full answer...
Hey Mike,
When measuring for an RV Cover you'll want to measure from the end of the rear bumper to front of the trailer body, without including the trailer tongue. If your trailer measures 24' to 26' in length then you'll want to go with the Adco Olefin HD RV Cover # AD77ZR. Based on the picture I doubt it's smaller but if it's less than 24' you can go with the # AD67ZR (22' - 24') instead.
The Adco Olefin HD line is rated for use in all climates and comes with an white Olefin top panel... view full answer...
You will need a minimum of 10 inches of clear space inside your trailer for the double step Lippert SolidStep RV Steps for 25" - 28-7/8" Wide Doorways # LC733931.
Then for the threshold/lip that can be up to an inch for the install of the steps. view full answer...
No, I am sorry. Your research is correct the swing-away adapters like the item # PVP20B just aren't built strong enough to withstand the extra vibrations and stress caused by being mounted on RV's. Plus they reduce the hitches capacity by 50% leaving you with a minimal amount of capacity to handle the weight of a 4-bike bike rack and the bikes themselves.
The only solution I can offer you is the Hollywood Racks Sport Rider SE Bike Rack item # HR1400Z which tilts down when loaded or unloaded... view full answer...
No, I am sorry. The MORryde Camping Kitchens like item # MR73QR are all the same size because they're designed for Jeeps. It's collapsed dimensions are 26-9/16" long x 17-13/16" wide x 7-9/16" tall but the tray extends out a total of 73"
To get something the size you're wanting you'll need to get a slide out tray like the 60" x 42" MORryde RV Cargo Sliding Tray item # MR83FR. view full answer...
Go To Results