We have replacement support arms for your Solera pitched awning, though the small arm by itself is not available separately from Solera; they only have the full support arm assembly available. For your pitched awning the correct part is the following:
- White: Solera 66-1/8" Pitched Awning Support Arm # LC260294 view full answer...
Yes, you can use the Thule Hitching Post Pro # TH934XTR and it will do a good job for you. You're likely going to need bike frame adapter bars for the kids' bikes and for any other bikes that have aggressive step through frames; for those you can use the # 64005.
I also recommend getting the Thule Snug Tite Hitch Lock # THSTL2 and the Thule Cable Lock # TH538XT to secure your bikes.
I've linked a review video of these parts for you to check out, as well. view full answer...
Instead of rewiring everything I recommend product # RVS-611-IR which comes with infrared illuminators which help immensely when in low light / no light conditions.
Voyager designs their cameras to only work with their wiring and do not manufacture adapters so if you would like to switch to a voyager camera you would have to rewire your whole system. The manufacturer also stated that their products wouldn't be compatible with your in-dash Mercedes display screen.
I've attached videos... view full answer...
For your Jayco 5th Wheel I recommend product # LG-142178 which is manufacturer matched as the correct replacement while also offering the 5,500 lb weight capacity you were looking for. view full answer...
This isn't the first time that this has been asked, however the 7-way connector part of the Pilot Magnetic Tow Lights NV-5164 is not offered separately as a replacement unfortunately.
However, I know it's not ideal, but in order to get the replacement 7-way connector you need, you'll need to purchase the entire kit again. view full answer...
The Fastway Self-Locking, Adjustable 2-Ball Mount, Stainless Balls - 2.5" Hitch - 8" Drop/9" Rise # DTSTBM6825-2S will work well on your truck assuming the rise/drop and capacity fits your needs. When choosing an adjustable ball mount there are a few things to consider. The most important things are the capacity, shank size, ball diameters, and the tallest rise and deepest drop you'll need.
The # DTSTBM6825-2S fits a 2-1/2" receiver. It has a tongue weight capacity of 1,000 lbs and a... view full answer...
I took a look at what we have, and I was able to find the:
-Gen-Y 2-Ball Mount for 2-1/2" Hitch Receivers # 325-GH-064.
This ball mount will use the larger 3/4" hitch pin # 58388 that you mentioned you have, however this ball mount is designed to fit into 3" x 3" trailer hitch receivers.
If your receiver opening is smaller, you can use the Curt Hitch Receiver Reducer Sleeves # C45408. This reducer sleeve will allow you to adapt the ball mount to your 2-1/2" or 2" receiver opening.
The... view full answer...
The quality of sound will come from the speakers, not necessarily the main unit. That said, the iRV RV Stereo part # IRV64FR can support up to six 45 watt speakers so you should have no issues finding some that fit this parameter and provided the bass you're looking for. We also offer the Furrion RV Enclosed Amplified Subwoofer part # FSW8P12CF which would work great with a nice set of speakers to provide high and lows. The subwoofer will provide the bass you're looking for more so than... view full answer...
I recommend changing over to the Yakima JetStream Crossbars # Y00426 which will require new TimberLine Towers # Y33TR on your 2019 Toyota 4Runner. This will give you 60" long crossbars.
Rola no longer makes crossbars for vehicles as they have transferred over to only carrying cargo racks and ladder rack systems.
The Yakima Same Key System (SKS) Lock Cores # Y07208 will provide you with 8 lock cylinders that are keyed alike. You can use 4 for securing your crossbars the other 4 can be... view full answer...
The Yakima SkyRise HD Tent for Roof Rack Crossbars # Y07436 does have a crossbar spread of 26" - 40-1/2" to fit your 28" crossbar spread but we do also carry the following tents that can accommodate a 28" spread:
Yakima SkyRise HD Tent for Roof Rack Crossbars # Y07437 - 26" - 40-1/2".
Thule Tepui Foothill Rooftop Tent Agave Green # TH37HJ - 24" minimum.
Thule Tepui Low-Pro 2 Rooftop Tent Gray # TH8001LP204 - 24" minimum.
Note: Thule rooftop tents should not be used with any factory-installed... view full answer...
For your RetraxPRO tonneau cover, like the RetraxPRO XR Hard Tonneau Cover # RTT-80383, you can use the:
-Thule ProBar Truck Bed Rack # TH713700.
These crossbars are designed to work with the Retrax hard tonneau covers, has a carrying capacity 165lbs, and measures 79" long, 2" wide, and is 1-1/2" tall. view full answer...
There are gooseneck couplers available which are capable of extending. For example, the Pro Series Gooseneck Coupler - Adjustable # PS0287790300 can extend to nearly 35 inches.
I have added a link to our page with each of our gooseneck couplers for you to find the one with the correct weight capacity and gooseneck ball size compatibility. Also be sure to measure the amount of height you'll need to get your trailer level so you can find the coupler with the right amount of length. view full answer...
I can tell you that the Goal Zero Yeti 150 # 287-22004 is most likely not going to provide enough power for anything more than a couple strands of Christmas lights. For reference, a typical set of 25 C-7 Christmas lights pulls about 40 watts. The Goal Zero only puts out about 150 watts on AC power and is meant to work with small items that don't draw a lot of power, so you'd be struggling to power more than a 4-5 strands of lights with incandescent bulbs.
I've linked one of our help articles... view full answer...
You will want to stick with one brand throughout the entire roof rack kit; various brands of roof racks are not made to be compatible and interchangeable with each other. The most economical roof rack for your 2008 Scion xB is Inno Square Crossbars - Steel - Black - 58" Long - Qty 2 # INB147 with Feet # INSUT and Fit Kit # INK300. This has a weight capacity of 120lbs. view full answer...
The MaxxFan # MA00A04401K would be a good replacement fan for most any camper. It fits a standard 14X14" opening and features 4-speed exhaust fan, manual lift design, removable bug screen and sealed motor. A new inside ceiling trim piece (garnish) is included.
You may want to additionally consider adding the MaxxAir # MA00-955001 FanMate roof cover to help keep the rain out. Additionally, during installation you will need the TremPro # 0160297 roof sealant. view full answer...
I reached out to my contact at Tekonsha and there are a few things to check. Since you used the Plug-in Adapter to install the Tekonsha PowerTrac # 39523 in your 2020 Ram 1500 there are two posibilities.
The first is to double check that the factory trailer brake controller port is sending the stop light signal through the red wire to engage the brakes. You can test this by using a circuit tester like # PTW2993 on the red wire on the harness of the brake controller. If when you press the... view full answer...
The closest option we have is the Phoenix Faucets # PF223502 faucet with shower diverter in rubbed bronze. Also look at the Phoenix # PF222541 for a different style. Add to this the Phoenix # PF276027 Shower Set in bronze.
You will also need some TremPro # 0160297 silicone sealant for the install.
Unfortunately we do not have any vintage parts, or anything nearly as heavy duty as you have pictured. view full answer...
For 4.80-12 tires with a higher speed rating we have the Taskmaster 4.80R12 Radial Trailer Tire - Load Range C # TT48012C. This tire has a speed rating of M for 81 mph. You can get the tire by itself if you want to mount it on your existing rims, or we have wheel and tire combinations where it comes already mounted. We have the following available:
-Taskmaster 4.80R12 Radial Trailer Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - Load Range C # TA98RR view full answer...
That's totally fine, it's just nice to have the ability to use a weight distribution hitch because if you ever do trade up or tow a trailer to move some stuff around and you get in the 3,500-4,000lb range these start being pretty useful to help with sag and keeping the trailer tracking straight.
The Curt Trailer Hitch Receiver # C99FR is a confirmed fit for your Highlander and will offer a much more hidden look with the crosstube being completely hidden behind the bumper. The wiring and... view full answer...
Go To Results