While the pivot bolt part # RM-350800-00 is torqued down pretty tight the wear plate that goes between the two moving pieces allows the movement. view full answer...
The multi-fit motorhome trailer hitches are not a fit for any specific motorhome, so to find out if the Multi-Fit Motorhome Trailer Hitch # 5350 fits your 1999 Chevy Four Winds you need to measure your chassis frame.
If it measures between 24" and 46" wide then you can use the Multi-Fit Motorhome Trailer Hitch # 5350.
I have added a link to a video review and the installation instructions for you to check out as well. view full answer...
To add a hitch to your 2004 Safari Trek Motorhome you'll want to use the Curt Adjustable Trailer Hitch item # C13701. This is a class III hitch with a 2" receiver that has the requested 5,000 lbs towing capacity. This is a universal hitch that can be bolted or welded onto your Workhorse's frame. There are no custom fit options for your motorhome.
Just a heads up. We have a had a similar question related to your 64-6230 Hidden Hitch that we have reached out to Draw-Tite on. According to... view full answer...
If you're wanting to replace just the rooftop unit of your 2007 Holiday Rambler Augusta's AC system then you'll just need the Furrion Chill Replacement RV Air Conditioner for Coleman Setup # FR42PV. This unit is going to replace just the rooftop unit that you have and allow you to retain use of your current air distribution box and thermostat. It comes with an adapter cable to make installation seamless.
If you're wanting to replace your entire system then I recommend the Furrion Chill... view full answer...
You do not want to disconnect any wiring from the brake switch on your 2005 Safari Trek Motorhome. I cannot find any information that shows that your blue wire from your 7-way is the same as what connects to your brake switch. Normally if you have wiring from the factory they will be bundled with a power wire, brake switch signal wire, ground wire and the wire that travels to the 7-way. I cannot find evidence that this is what you have 2005 Chevrolet W20. If you do have these wires they... view full answer...
For a Class III hitch solution that could fit your 2008 Winnebago Adventurer 38J we have the Curt adjustable multi-fit hitch part # 13703. This fits frame widths between 22 and 72 inches and all standard frame styles. We do not have a custom fit hitch that your RV though. view full answer...
Since the install of the pivot bolt part # RM-350800-00 that you referenced requires 70 ft lbs there wouldn't end up being any clearance between the pad and the pivot bolt nut. The pad ends up getting bolted to the deck. view full answer...