Expert Answers about Nissan Versa

• Parts Needed to Flat Tow a 2011 Nissan Versa
• A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...


• Part Needed to Flat Tow 2016 Nissan Versa Behind Motorhome
• We can help you with base plates and the other items needed for safe and legal flat towing of your 2016 Nissan Versa with manual transmission. The linked articles will give you good background on each of the required items, which include the tow bar, safety cables, a wiring/lighting kit, a high/low hitch adapter and base plates and a braking system for the towed car. Since you have a Roadmaster tow bar you'll be better off using their base plates; this avoids the need for adapters that...
  view full answer...


• Parts Needed to Flat Tow 2015 Nissan Versa Behind Motorhome
• Yes, to flat tow your 2015 Nissan Versa behind a motorhome you can use Roadmaster Base Plates, # RM-52357-4A, which you reference, along with the Blue Ox Avail Tow Bar, part # BX7420. You will also need a RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter # RM-033. Next you will need lights on the Versa. If you will not be towing it frequently then I recommend a magnetic kit like # C-ATL20A. If you will be towing it often I recommend kit # 154-792-118158. I have linked instructions...
  view full answer...


• Is There A Load Bar Clip Compatible With The Thule AeroBlade Crossbars And The Thule Fairing 871XT?
• Thule actually does not offer a load bar clip to adapt your Thule Fairing 871XT, to your Thule AeroBlade Edge Roof Rack Crossbar 7502B as they claim the AeroBlade bars are quiet enough that they don't need one. Instead, what you can do is use the similar Rhino-Rack Fairing for Roof Racks # RRRF2, which is compatible with your AeroBlade crossbars.
  view full answer...


• 7-Way Trailer Socket to Mate with Plug A7WCB
• Part # A7WCB uses a connector format known as an RV-style 7-way blade. Although the plug itself is round the actual electrical contacts are flat or blade style. This male plug mates with a female socket such as # 37185 or # 30717. I am not familiar with the DTS brand but I presume it is the maker of the connector you have. My contact at Blue Ox confirmed that the threaded rods on the crossbar can be bent to fit a wide range of 6-way and 7-way trailer socket mounting hole spacing. I have...
  view full answer...


• Parts Needed to Adapt etrailer SD Tow Bars to a Roadmaster Base Plate for a 2011 Mini Cooper
• To get the etrailer SD Non-Binding Tow Bar # e34ZR to fit the base plates for your 2011 Mini Cooper, you're just going to need # e74ZR if the base plates are direct connect or # e44ZR if they're crossbar style.
  view full answer...