The closest I was able to find, is the Flex-a-lite Variable Speed Controller w/ Stainless Steel Temperature Probe for Electric Fan # FLX31165.
This is designed for 12V systems, will allow you to easily adjust the temperature between 160°F and 240°F, and has a 45-amp rating.
Additionally, the fan will turn on at 60 percent power and the fan will increase as the temperature rises. view full answer...
The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Lithium Charger # PD4045LIKA you reference has been discontinued, and is no longer available from the manufacturer. This product has been replaced with the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger # PD4045KA.
This new version has a toggleable switch to allow you to switch to lithium, so they've discontinued the lithium only version. view full answer...
If the trailer's GVWR is 2,500 pounds you'll be fine with a Load Range D or E tire. A 205/65-10 tire with Load Range D like # AM1HP54 is rated up to 1,330 pounds at 70 psi and the E tire like # AM1HP56 is rated up to 1,650 pounds at 90 psi.
Either of those will be fine. view full answer...
We don't have any custom hitch receivers confirmed to fit the 1982 Chevrolet van cutaway used for your Winnebago Warrior. But we do have universal RV hitches that may work for you.
With 5,000 towing capacity we have the Curt # C13702 which will fit vehicles with frames that are between 18 to 51 inches apart. It can be welded or bolted onto the Winnebago.
I recommend verifying the towing capacity of the RV as well because you will be limited by the lowest rated component. view full answer...
I have a solution for you, but the Go Power Heavy-Duty Modified Sine Wave Inverter - 1,000 Watts - 12V # 34280176 isn't what I would recommend for use with a refrigerator because it may potentially damage the unit. I also would go with a slightly higher rated inverter to make sure that enough power is available.
Instead I recommend using a Pure Sine Wave inverter like the Go Power Industrial Pure Sine Wave Inverter - GFCI - 1,500 Watt - 12V # 34279950, which will be well rated to use... view full answer...
To flat tow your 1986 Chevy G30 van you are going to need a number of parts, starting with a base plate and tow bar. Since there are no vehicle-specific base plates for your van I recommend checking out the Curt Tow Bar with Adjustable-Width Arms # C19745.
This comes with clevis mounts that need to be bolted on the van, and will require you have or fabricate a flat area on the frame, as you can see by the accompanying cut out of the linked directions. Also note that this tow bar and mount... view full answer...
The corroded wires will need to be replaced with new wire and that will help with the running light problem. But there could be corrosion elsewhere so you will need to inspect the trailer wiring from front to back and repair as needed. Also, make sure the trailer side connector is clean and free of corrosion inside where the wires attach and outside on the pins.
To switch the ban over to a 7-Way you will need # ETBC7. This will provide the 7-Way and retain a functional 4-Way. It also provides... view full answer...
In order to find the brake wire under your dash, you are going to need a hook probe circuit tester # PTW2993. You will need someone to engage your brakes on the Chevrolet Van as you use the circuit tester to see which wire is the brake wire. When you find the right wire, a light will glow on the circuit tester.
The wires that you will be testing is a bundle of wiring coming out of the back of the brake pedal stop light switch.
The Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41121... view full answer...
Go To Results