Expert Answers about GMC Topkick

• Hitch for 2005 GMC C5500 Topkick with Tommy Lift
• The # TLF1003-30 hitch you're asking about is designed for a 1999-2016 Ford F350, F450 or F550 chassis/cab and wouldn't fit your Topkick. For your truck, you'd need a multi fit hitch for heavy duty trucks as none of our vendors offer a custom made fit. In order to choose the correct one, you'll need to know the needed drop, height difference between the rear bumper and the underside of the Tommy Lift. If these heights are even, use the # 3371801050 from Buyer's Products. For a 3 inch...
  view full answer...


• Recommended Tankless Water Heater Replacement For A Suburban 12 Gallon RV Water Heater
• The best tankless replacement for your Suburban 12 Gallon Water Heater is the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 18" x 18" Door Item # FR68SR. It has similar dimensions at 12-5/8L x 12-13/16W x 19-3/16D so you'll need to make slight alterations to your cutout hole to fill in the gap but the performance output of this unit will be worth the work. The on-demand hot water and ability to set the temperature to a specific degree instead of the old fashioned...
  view full answer...


• What Ramps Are Good For Loading A Car Onto A Flat Bed Truck
• I do not think the Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2 # 288-07503 would be the safest set of ramps for this particular job. They can handle the weight of the car no problem but looking at the picture you provided I do no think the angle of the ramps will be low enough to let the car get on the flat bed without bottoming out. I definetly recommend going with a longer set of ramps like the Gen-Y Hitch Aluminum Loading Ramp Set - 96" Long x 15" Wide - 10,000...
  view full answer...


• Dimensions of the SumoSpring Helper Spring for a 2009 GMC Topkick
• The bump stop is 5" long on the SumoSprings Solo Custom Helper Springs - Front Axle item # SSF-281-47. The bracket is 7/8". This is a confirmed fit for a 2009 GMC Topkick. I have attached a diagram I made below.
  view full answer...