Expert Answers about Kia Telluride
- Do All 2021 Kia Tellurides Have Tow Package for Trailer Wiring Harness
- The 2021 Kia Tellurides all come with the factory tow package port that the Curt T-Connector Vehicle Wiring Harness part # CU94FR plugs into. It does not have to come equipped with the factory tow package per se. It's a direct plug-in fit for all models regardless of options.
view full answer... - Roof Rack for 2021 Kia Telluride with Flush Rails and Sunroof
- I checked with Thule and for their roof racks like the Jetstream part numbers # TH56FE, # TH89SC, and # TH77JV they state that some accessories may interfere with sunroof opening if installed on this rack which would mean that the sunroof would open but with any accessories installed you may not be able to.
Thule does not mention the sunroof at all so I would assume it's same as well as Rhino Rack.
view full answer... - Is A Curt Weight Distribution Hitch Compatible With Fastway Frame Brackets
- Typically parts from different manufacturers will not be cross compatible, but if you were replacing the whole frame bracket, it really shouldn't be an issue. However, we do also carry a replacement that may be a better option.
The Replacement Frame Brackets for Curt TruTrack Weight Distribution System # C17508 will replace both sides of frame brackets and will include all hardware and L-Pins. This can also work with several Curt systems, but if you can tell me the model number you have,...
view full answer... - Can Yakima Offgrid Roof Cargo Basket Fit Rhino Rack Vortex Aero Crossbars
- Yes, the Yakima Offgrid roof cargo basket part # Y07139 that you referenced is compatible with the Rhino Rack Aero Vortex crossbars like the part # RRVA137B-2.
view full answer... - Will A Stryker LX 360 Air Boat Fit On CE Smith Multi Sport Boat Trailer CE48810?
- Since your Stryker LX 360 inflatable boat is 11'7" long x 5'6" wide it will fit on the CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs # CE48810 you were looking at and have the motor/transom completely on the bunks, but the front half of the boat will not be. The bunks are only 4-1/2' wide so you will have about 6" overhang on each side of the trailer.
You will just want to move the winch mount forward until it is in the correct location for you to...
view full answer... - Recommended Trailer Hitch Wiring For A 2023 Kia Telluride
- There are two confirmed options for your 2023 Kia Telluride, the Tekonsha # 119190KIT and Curt # C59236. Of the two Tekonsha is known to be the more reliable option in terms of quality and tends to have fewer issues later on in its lifespan. Both are essentially the same installation-wise since you'll be splicing in the wiring to you Telluride, so if I had to personally choose I would pick the Tekonsha # 119190KIT for your Telluride.
If you plan on towing anything with brakes then you'll...
view full answer... - Can MaxxTow Dual Hitch Receiver be Used to Raise Height of Cargo Carrier on 2020 Kia Telluride
- You can, but it's worth noting that the MaxxTow Dual Hitch Extender MT70070 will reduce the weight capacity of your trailer hitch by 50% so if you're already hitting the ground with your 2020 Kia Telluride then I'm not sure if this will improve anything.
In all honesty it would be much more effective if you were to transfer that extra weight to a different part of your vehicle like your roof with a roof rack system or a more cost effective cargo bag like part # RL100A50 that uses clamps...
view full answer... - Recommended Hitch for a 2021 Kia Telluride
- Congrats on the new vehicle! To add a hitch with a 2" receiver to your 2021 Kia Telluride you will want the etrailer Hitch item # e45ZR. This hitch is custom fit and is guaranteed to bolt to your Kia with included hardware. I really like this hitch because the cross tube mounts behind your rear bumper cover leaving only the 2" x 2" receiver visible.
The etrailer Hitch item # e45ZR is a class III hitch with a 2" receiver it weighs 46 lbs. It has a 5,000 lbs towing capacity, and a 500 lbs...
view full answer... - Will Roof Rack Adapters for Thule HideAway Awnings Work with Yakima HD Crossbars
- I do have an option for you but the Yakima HD Crossbars like part # Y01158 measure 3" wide x 1-1/2" tall and the Roof Rack Adapters for Thule HideAway Awnings part # TH490001 are only compatible with crossbars measuring up to 3-1/2" wide x 1-3/8" tall. That said, if you take a trip to the hardware store to find some longer carriage bolts it would then work.
view full answer... - Recommended 4-Way Wiring Harness for a 2023 Kia Telluride
- Yes, it will. Since your 2023 Telluride has the factory tow package you will need the Curt T-Connector Vehicle Wiring Harness item # CU94FR to add a 4-way connector to your Kia. This custom-fit T-connector plugs into your Kia's wiring harness behind the interior trim panel in your rear cargo area.
I have linked an installation video below.
If your 2023 Telluride does not have the factory tow package you'll want to install the Curt Powered Tail Light Converter with 4-Pole Flat Trailer...
view full answer... - Correct Thule Fit Kit for a 2023 Kia Sportage
- The Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet # TH28JQ you're referring to are going to work just fine with a 2023 Kia Sportage.
I did some poking around however, and it looks like this fit kit is not a fit for the 2022 Kia Telluride so I'm not quite sure how you're using it with your Telluride.
You were supposed to be using the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet # TH77JV. Either way, if you somehow were using the other fit kit...
view full answer... - Trailer Wiring for 2004 Chevy Silverado Without Hitch
- For your 2004 Silverado, the Replacement Custom Multi-Tow 7-Way and 4-Way Trailer Connectors # 30955 will work with your stock wiring harness if you have the tow package. If you don't have the tow package wiring then you will need to go deeper because the standard wiring had the brake light and blinkers on separate wires so a converter is needed. Before going into all that, check by the spare tire as many models came wired and converted even without the tow package.
If you find you don't...
view full answer... - Will a Magnum Navigator E Bike Fit in the Yakima OnRamp Bike Rack?
- Yes, the Yakima OnRamp Bike Rack for 2 Electric Bikes - 1-1/4" Hitches - Frame Mount item # Y96FR is compatible with your Magnum Navigator electric bike. The Yakima rack has a 66 lbs capacity per bike and accommodates tires up to 3.25 inches wide. The specs I have pulled say your bike weighs 60 lbs and has 2.25 inch tires.
view full answer... - Which Westin Grate Step Nerf Bars Fit 2017 Chevrolet Traverse
- The correct Westin Grate Step Nerf Bars for your 2017 Chevy Traverse are the # 27-74715-1835. According to Westin, there are too many variables to assign a specific weight rating to the nerf bars and mounting kit. As long as you are using them as intended to step in and out of the vehicle you won't have an issue.
view full answer... - Will Westin Grate Step Nerf Bars Fit 2022 Toyota Tacoma Double Cab
- The # 27-74715-1615 is designed to fit the 2005-2023 Toyota Tacoma Access Cab. For the 2022 Double Cab you need the # 27-74735-1615 instead. These are slightly longer to match the longer cab.
view full answer... - Will the Replacement 2" and 2-5/16" Dual-Sided Ball C45923 Fit the Curt Pintle Hook C45908
- Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part # C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part # C45908.
view full answer... - How To Pull 2003 Toyota Camry With Automatic Transmission Behind A Motorhome
- According to Toyota the 2003 Toyota Camry automatic is not designed to be flat towed behind a motor home with all 4 wheels on the ground to avoid damage to the vehicle's transmission. The only way to flat tow the Toyota Camry automatic is with a tow dolly.
I recommend the Demco Kar Kaddy X Tow Dolly with Disc Brakes part # DM9713093 because of it's disc brake system. There is not a need to add an electric brake controller to the motor home like with the other options. The Kar Kaddy is...
view full answer... - Can I Use Thule Wind Fairing on 2021 Kia Telluride Factory Crossbars
- The AirScreen XT for Thule Roof Racks- 44" # TH82WV or 52" # TH22WV hasn't been tested with factory crossbars, so you'll want to measure the dimensions of your bars- the # TH82WV was designed to fit on bars that are mostly 1-1/4" tall and 3-1/2" wide. If your factory bars aren't close to those it might be too loose of a fit, but typically factory crossbars are roughly similar to aero style crossbars in width so it'll be the height that you might find hardest to make work. You can measure...
view full answer... - Which Custom Fit Kit For Using Thule Evo Crossbars And Evo Feet On 2020 Kia Telluride
- You are correct that the your 2020 Kia Telluride requires the 186095 Fit Kit for Thule Evo Flush Rails which is part # TH77JV that requires your Telluride to have flush rails running front to back. The Fit Kit # TH186007 is for BWM SUV's as you mentioned.
The complete Roof Rack System for your 2020 Kia Telluride is the Thule WingBar Evo Crossbars # TH711420, Evo Flush Rail Feet for Thule Crossbars # TH710601, and Fit Kit # TH77JV.
I included a video of the Thule Roof Rack System for you...
view full answer... - Recommended Wiring Harness for a 2023 Kia Telluride
- As of 3/11/23 the only wiring harness available for the 2023 Kia Telluride are universal options that have to be spliced. We do not have an ETA on when to expect a custom harness. So if you need a wiring harness now a universal fit is your only choice. The Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector item # C59236 is by far the best option. Curt makes some of the most reliable wiring harnesses in the towing business.
I have linked an installation video below we...
view full answer...
Go To Results