Expert Answers about Acura TLX

• How to Run 4-Way Wiring Harness Hot Lead To Car Battery on 2015 Acura TLX
• The hot lead on the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118697 does not have a specific diagram showing where to run it when connecting to the battery. The instructions state "Either route the black wire thru a grommet and along the exterior frame or follow the existing wiring along the thresholds." We have also not yet had a chance to install this on a 2015 Acura TLX. What I do have is an installation video, which I have attached below, on a similar 2015...
  view full answer...


• Do the Trailer Hitch Holes In the Frame On a 2019 Acura TLX Need to Be Enlarged
• I took a look at the install instructions for the Curt Trailer Hitch Receiver part # C11535 which is a fit for your 2019 Acura TLX and did not see any mention of enlarging holes. However, I read a few of the reviews and seen there was indeed some instances in which the frame holes needed to be enlarged. Unfortunately, the size of the holes is not something we nor the hitch manufacturer has control over as there is always going to be slight variations from the vehicle manufacturer. This...
  view full answer...


• Install Photos of the Draw-Tite Trailer Hitch on a 2018 Acura TLX
• I do have better install photos of the Draw-Tite Sportframe Trailer Hitch Receiver part # 24942 which show the receiver tube more clearly and I have attached those for you. However, these photos are on a base model, not an A-Spec as we have not yet had the chance to install a trailer hitch on a 2018 Acura TLX A-Spec. There is an install video which I have attached for you as well. Unfortunately, we rely on customer vehicles to get photos and we have just not simply had a customer come in...
  view full answer...


• Does Curt Class I Hitch C11535 Require Drilling for Installation on 2015 Acura TLX
• The Curt Class I hitch you referenced, part # C11535, does NOT require you to do any drilling for installation on your 2015 Acura TLX. You will need to temporarily lower the exhaust for easier access to the frame's mounting points; all that is required for this is slipping off the rubber hangers that support the exhaust. You'll also do a little bit of trimming on the heat shield. The hitch includes all required hardware for bolt-on installation. The manufacturer's written instructions...
  view full answer...


• How to Install a Hitch on a 2019 Acura TLX
• The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # 24942 you referenced has a 10/10 on our difficulty for installation scale. The instructions state it will take a professional about an hour to complete the install. I have linked the instructions and an installation video. If you do not feel comfortable after going over the instructions and watching the process then you should look in your area for a professional installer. We have a link to find local...
  view full answer...


• Is There a Way to Transport a 225 lb Honda CRF150F Dirt Bike with a 2016 Acura TLX
• Since both trailer hitches for your 2016 Acura TLX, Curt # C11535 and Draw-Tite # 24942, have a 200 lb tongue weight, even if there was a carrier that fit the smaller 1-1/4" receiver the weight of both the carrier and your Honda CRF150F dirt bike would be well over that. This means that the only option for you to transport your dirt bike with that vehicle is by towing it with a trailer. Your owner's manual does state that towing may void your warranty but it is worth noting that you are...
  view full answer...