Yes, we do have a hitch receiver for a 2022 Hyundai Sonata. It is the Draw-Tite Sportframe Trailer Hitch Receiver item # DT74MR. This hitch is custom fit and after the install the only thing visible will be the 2" x 2" receiver tube.
If you are looking for a bike rack I recommend the Yakima HoldUp Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount item # Y02445. This carrier has a weight of 49 lbs and a the capacity to hold 2 60 lbs bikes. view full answer...
If you have the panoramic sunroof on your 2016 Hyundai Sonata the best and only solution available that won't potentially damage the sunroof is the Seasucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long - Black # 298-SX6000B. With that said, it's a really strong and durable option that will hold up just fine being on your roof for the length of your trip. The Seasucker systems are extremely durable and provide a strong connection to your vehicle because of the vacuum mounting suction... view full answer...
The components needed to tow a trailer include a trailer hitch receiver, ball mount, pin and clip, trailer hitch ball, and a wiring harness. I have included an article which covers this.
To get your 2007 Hyundai Sonata ready for towing, I recommend the following:
Trailer Hitch - Draw-Tite Class I Trailer Hitch Receiver, # 24757. This is a custom fit hitch offering a 2,000 lb towing capacity and bolt-on installation. No drilling or welding is required.
Ball Mount - Sportframe Drawbar,... view full answer...
The ball mount you get to pair with the Curt Trailer Hitch Receiver # C11402 on your 2018 Hyundai Sonata ultimately depends on the height of the trailer coupler that you're towing. A general rule of thumb is that smaller trailers will have a coupler height of about 14" - 16" and when we installed this hitch on a 2018 Sonata (see attached video) we found the hitch height to be 10-1/2" which means we need a minimum rise of 3-1/2" to be in that range.
For your application I recommend checking... view full answer...
Out of the two trailer hitches that we have confirmed to fit your 2022 Hyundai Sonata The Draw-Tite Sportframe Trailer Hitch # DT74MR has the most hidden design. The trailer hitch has a concealed cross tube that will give your 2022 Hyundai Sonata the clean off the lot factory look.
The trailer hitch has a 1-1/4 inch by 1-1/4 inch receiver and has a tongue weight up to 200 pounds. In addition to the trailer hitch you will also need a class 1 bike rack. The Swagman Trailhead 2 Bike Rack... view full answer...
The hitch capacity and tongue weight is not affected by the drop and rise of a ball mount or shank. For your 2020 Hyundai Sonata we have the Curt Trailer Hitch Receiver item # C23HR. This is a custom fit hitch that will attach to your Sonata with included hardware and requires no drilling or welding of your frame.
To address the almost 6" rise you said you were needing I recommend the Curt Drawbar for 1-1/4" Hitches item # C45028. This ball mount has a rise of 5 3/8".
If you need a hitch... view full answer...
It sounds like you're wanting to tow your 2013 Hyundai Sonata on a tow dolly that does not have lights. By far the simplest way to go about this is to use a set of tow lights that have a 4-pole connector. These provide an easy plug-in installation and don't require you to start cutting into the car's wiring to install a diode kit like # TR118821.
Examples of such light kits include the magnetic # RM-2120, and others like the # C6304 from Hopkins. view full answer...
Adding hydraulic disc brakes to your Load Rite boat trailer is an excellent choice since you won't have any electrical components, so your trailer can safely be backed into water. On top of that, when compared to hydraulic drum brakes, disc brakes stop harder and require less maintenance.
For a stainless steel disc brake kit, I recommend the Kodiak Disc Brake Kit # K2R35S. It uses a 5 on 4-1/2 wheel bolt pattern, most commonly found on 3,500 lb axle setups. This kit will provide you with... view full answer...
Since the Tekonsha # 118557 and Curt # C56049 are powered by a connection to the battery and have converter boxes, there aren't any issues when using them with LED tail lights on your 2014 Hyundai Sonata GLS; you won't need to use any diodes or resistors to make your harness work properly to power your trailer lights.
I do recommend using the Tekonsha # 118557 since we've found that the powered Modulite converters on these harnesses are much more reliable than some of the others available.... view full answer...
I believe what you're looking for is the Malone SaddleUp Pro Kayak Roof Rack w/ Tie-Downs # MPG110MD. This kayak carrier will easily clamp onto your square Malone VersaRail square crossbars, and give you the option to carry up to 1 90 lb kayak. view full answer...
Since your 2009 Hyundai Sonata features a manual transmission, it can be flat towed. According to the online version of the owner's manual, when towing with all four wheels on the ground, the ignition key should be placed in the "ACC" position and the trans-axle in "N" (Neutral).
Now, let's go over the 5 main components that are needed to safely flat tow your vehicle:
Tow bar - link between your RV and your Sonata
Base plate kit - custom made to install on the frond end of your Sonata... view full answer...
The Draw-Tite # DT74MR is definitely a good place to start when setting your 2021 Hyundai Sonata to tow your jet ski and trailer. You are correct in that you will need a few more parts to get everything connected and working properly, though.
First will be a ball mount and ball. Finding the correct one for this will depend on a few measurements, so these will be examples. To find the correct amount of drop or rise needed, you will need to measure from the ground to the bottom of the coupler... view full answer...
Unfortunately there is not a fit kit that will allow your Rhino Rack Aero bars using the 2500 series legs with both your Hyundai Sonata and your Ford Escape.
Rhino-Rack doesn't actually make any crossbars for the Hyundai Sonata, so you'd need to use a different set of bars. You could instead use the Inno Aero Crossbars # INXB130-2, with the Inno Through Feet for Aero Crossbars # INXS250, the fit kit # INK537 for the Sonata, and # INK628 for the Escape.
These bars are Aero bars like your... view full answer...
It looks like the only hitches available for your 2006 Hyundai Sonata have a Class I rating so you're going to need to use a trailer to transport the scooter as opposed to a hitch-mounted lift. This is due to the 200 lb tongue weight rating of the hitch itself which, to my understanding, the scooter would already be pushing the limits for.
If you're interested in going this route then I recommend using the following parts:
Curt Trailer Hitch Receiver - # C11325
Curt T-Connector Wiring... view full answer...
I would be happy to help you find a hitch receiver and a bike rack that fits your 2022 Hyundai Sonata. I recommend the Draw-Tite Sportframe Trailer Hitch Receiver item # DT74MR. This is a custom fit hitch that bolts directly to your Sonata's frame and has a 1 1/4" receiver. It is a class 1 hitch receiver that has a maximum gross trailer weight of 2,000 lbs and a maximum tongue weight of 200 lbs. I have attached a picture of what it will look like installed on a Hyundai Sonata.
For your... view full answer...
We do have a hydraulic disc brake kit that will fit 8 bolt hub, 8 on 6-1/2 Inch bolt pattern, 1/2 inch bolts. In addition to a hydraulic disk brake kit, you will also need a brake line kit, and a electric over hydraulic actuator, and a brake controller that is compatible with electric over hydraulic brakes.
For a disc brake kit to replace your drum brake assembly, you will need the Kodiak Disc Brake Kit, part # K2HR712, which is designed for 7,000 lb axles, 16 Inch or larger wheels. This... view full answer...
Go To Results