Draw-Tite Class I hitch # 24794 is a confirmed fit on your 2012 Nissan Sentra SE-R and when installing it I recommend using either a corded AC powered drill or at least an 18V cordless drill. You'll need a 1/2-inch drill bit. The reinforcement plate is included with the hitch.
I reviewed the installation instructions and the process consists of removing the spare tire, jack and rear fascia and drilling only two holes.
Required tools are noted in the linked instructions. I also included... view full answer...
For your 2018 Nissan Sentra all of the hitches we offer do require some drilling like the Curt hitch part # C11349 you mentioned. If the goal is to carry a bike rack you might look into a trunk rack option as that does not require a hitch.
The Yakima FullBack part # Y02634 is a confirmed fit and would work well. Check out the review video I attached for more info as well. view full answer...
Yes, the Draw Tite Hitch part # 24907 that you referenced does require a little bit of drilling to install.
For more info on the installation of this hitch check out the link I attached for the instructions.
For a similar hitch that doesn't require drilling that is confirmed to fit your vehicle you would want the Curt Hitch part # C11349. view full answer...
These Weather Tech Side Window Air Deflectors # WT82446 actually install very easily. It is a little difficult to describe how they attach, but basically you will need to slightly bend the deflectors to get them in place and then once you release the bend the tension of the deflector holds it in place. There are no adhesives to mess with or anything else.
I attached installation instructions for you to check out also. view full answer...
For your 2017 Nissan Sentra, I recommend the Draw-Tite Class I Sport Frame Receiver Hitch # 24907. This Class I hitch is confirmed to fit your vehicle as long as you do not have the SR model. I recommend this over the Curt alternative because unlike Curt, Draw-Tite does not require you to use additional stabilizing straps for non-trailer loads, such as bike racks and cargo carriers.
We have not yet had a chance to install this on your 2017 Nissan Sentra, so we do not currently have a... view full answer...
A trailer hitch is a great option for your 2016 Nissan Sentra if you are worried about mounting a clamp-on roof rack. As for the installation, neither process is going to be overwhelming as long as you are comfortable with a drill and torque wrench. The biggest difference is that the Curt # C11349 will require you to temporarily remove your rear fascia, though you won't have to drill your own mounting holes like you do with the Draw-Tite # 24907.
I've attached links to the installation... view full answer...
Yes, the installation of the Draw-Tite Class I hitch # 24907 on your 2015 Nissan Sentra DOES require drilling. All hitch options for your vehicle (as long as it is NOT the SR version) can be seen on the link provided. The Curt # C11349 is the one that does not require drilling but it may require some enlarging of the frame access holes with a rotary tool or file. The written instructions and a helpful hitch installation article are linked for you.
If you plan to use a bike rack in your... view full answer...
I have attached a link to the installation instructions for the Curt Class I Trailer Hitch, # C11370 and links to trailer hitch installation tips that will help, but we have not had a chance to install this hitch on a Nissan Sentra yet because we rely on local customers and rental companies for our vehicle supply.
The installation instructions that are linked include step by step directions. The most difficult part of this installation will be installing the 7/16 inch carriage bolts in... view full answer...
Go To Results