For your Kia Sedona we don't yet have an install video for the Curt # C55309. I have attached the installation instructions for you to check out and we are always here if you have any questions. view full answer...
So long as you have a 2-wheel drive model of 2019 Kia Sedona, there are two coil SumoSprings that fit, one for the front springs and one for the rear springs:
- Front: Coil SumoSprings # CSS-1125F
- Rear: Coil SumoSprings # CSS-1168R view full answer...
Our fitguide doesn't show any Thule or Yakima racks confirmed to fit your 2015 Kia Sedona. I checked with both manufacturers and they reflect the same. The only 3-bike trunk mount racks we've confirmed to fit the Sedona are the Saris Guardian, part # SAR43FR, if you use Hatch Huggers, part # SA3035, and the Hollywood Racks Over-the-Top, part # HRF2-3.
On the other hand, we do carry two Yakima 3-bike racks that fit your 2012 Nissan Leaf; the FullBack # Y02633, and the HangOut # Y02638.... view full answer...
I have a way better hitch for you but the frame on your 2012 Kia Sedona is not wide enough for the Curt Trailer Hitch Receiver item # C13900. Instead you will want the Draw-Tite Max-Frame Trailer Hitch item # 75421. This hitch is custom fit and bolts to your Sedona with included hardware. It does not require any drilling.
I recommended this hitch because it has a 2" receiver which will give you the widest options for accessories but also because this hitch has a 3,500 lbs capacity. You... view full answer...
I have another option for you, but at this time there is not a Timbren suspension option confirmed to fit your 2019 Kia Sedona.
Instead I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension # CSS-1168R which are confirmed to fit thee rear coil springs of your vehicle as long as it is a 2WD model. This is currently the only rear suspension enhancement option available. view full answer...
I did some research and the Sedona is Short Wheel Base -SWB. If it is a Sedona LX or a Sedona EX it is a Long Wheel Base-LWB. The best way to be sure is to measure.
Measure from the center of the front wheel to the center of the rear wheel. If the measurement is 113.8 inches, it is SWB. If the measurement is 118.9 inches, it is LWB.
For the SWB models we have the Draw-Tite # 75551. Then for the LWB models, you would need the Curt # C13345. view full answer...
Yes, your 2019 Kia Sedona without the factory tow package is still compatible with the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter # TK24FR.
According to the manufacturer, Tekonsha, this is compatible with all models of Kia Sedona and will plug into the tow package port which will be on your vehicle.
This is compatible with the Tekonsha brake controllers, and for that I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 as it is recognized... view full answer...
Since you are specifically addressing rear sag I recommend just getting the rear Sumosprings item # CSS-1168R for your 2019 Kia Sedona. These insert inside your rear coil springs to keep them from flexing all the way. This limits the travel on your suspension which keeps the rear end pushed up when under a heavy load.
The Coil SumoSprings item # CSS-1168R will not increase the ride height of your Sedona. They will help to reduce body roll and keep your rear end level when towing your... view full answer...
I would be happy to help you. The Draw-Tite hitch item # 75894 sits 11" off of the ground when mounted on your 2018 Kia Sedona. I have linked a diagram I made. You will want the Curt Ball Mount item # C45446. This ball mount has a 5" Rise and fits a 2" receiver. You will also need the Curt 2" Hitch Ball item # A-90. This will give you a 17" height to match your trailers coupler. view full answer...
I checked with Thule for you, and I can confirm that the Thule Motion XT rooftop cargo boxes are indeed a fit for your 2018 Kia Sedona with a factory roof rack (all models, including your EX). The only difference between this and the other Motion XT boxes is the storage space, and of course the size of the boxes as they need to be bigger to hold more cargo.
So you can choose from whichever size Motion XT you like, as they all fit your '18 Sedona:
- 22 Cubic Feet of Storage Space: Thule... view full answer...
From the looks of your photos, you have the Yakima Round Crossbars like the # Y00411 along with the old Control Towers # Y8890027.
If you are looking for a newer model of crossbars that have a more aerodynamic design that fit into the tracks, I recommend the following setup:
- Yakima JetStream Crossbars - 70" # Y00427
- Yakima SkyLine Towers # Y53TR
- 2 sets of the Landing Pad 1 # Y00221
- Same-Key Locks # Y07204
With this setup, the JestStream crossbars create a much quieter ride and... view full answer...
I would be happy to help you set up your 2021 Kia Sedona for towing. Lets start with a hitch. I recommend the Curt Trailer Hitch Receiver item # C13115. This is a class III 2" custom fit hitch that will attach to your vehicle with no drilling into the frame. It has a maximum gross trailer weight of 4,000 lbs and a maximum tongue weight of 400 lbs. I have attached a picture so you can see what the hitch looks like installed on a Kia Sedona.
For your trailer light control functions I recommend... view full answer...
There are a few trailer hitch options for the 2003 Kia Sedona, the Curt Trailer Hitch Receiver part # C13340 and the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75131 which both have the larger receiver tube opening. I recommend the Curt Trailer Hitch Receiver because there is no drilling required as there would be for the Draw-Tite Max-Frame Trailer Hitch Receiver. Unfortunately, there are not any more cost effective options available.
Please note, trailer hitches are specific... view full answer...
Yes, the Curt Class III trailer hitch, # C13115, has a 2 inch receiver and the Thule Apex Swing, # TH9027XT, is made for hitches with 2 inch receivers.
If you plan on carrying bikes with alternative frames, such as kids bikes or women's bikes, I recommend using an adapter bar, like part # TH982XT. The adapter bar attaches between the seat post and the handlebar stem. This allows the bike to be positioned more level in the carrier while providing additional ground clearance. I have attached... view full answer...
From what I can see the 2015 Kia Sedona has a 3.3L engine and would need the Kat's Heaters Custom Engine Block Heater # KH11479 instead of the # KH11812. Their catalog lists the installation port on the engine as "RR". view full answer...
The wiring kit you will need for your 2011 Kia Sedona is the T-One Wiring Harness # 118410. This kit will give you a 4-way connector to to power up the lights on your utility trailer. For your trailer you can use the 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire # A20WB.
I've added links to install videos of each of these products as well as a help article on trailer wiring which you may find useful. view full answer...
Doing a parts search I do see the same rear coil springs were used on the 2015-2018 Kia Sedona. Unless there is something added inside your coil springs that would prevent the Firestone Coil-Rite Air Helper Springs # F4138 I do not see why they wouldn't fit. I have also linked an installation video near the bottom of the page you can reference to determine if there are any other differences with your rear suspension. Firestone would not tell me the dimensions of the bag itself.
If there... view full answer...
What you can do is measure the wheel base of your 2007 Kia Sedona to determine if you need the long wheel base hitch, # C13345 or the short wheel base hitch, # 75551.
The long wheel base is 119 inches.
The short wheel base will be 113.8 inches.
Measure from the center of the front wheel to the center of the rear wheel.
From what we have found, the LX and EX models are long wheel base models. They will also have a third row of seating. I still recommend measuring to be sure.
For either... view full answer...
Possibly, but I am unable to confirm a fitment from a photo so you really do have to measure to see if you can use the Swagman RV 4-Bike RV Bumper Mount Rack # S80600.
The # S80600 will fit your bumper so long as it measures between 4 and 4-1/2 inches wide, and you have 1-1/2 inches between the back of the bumper and the rear wall of the trailer, as well as 1-1/2 inches from the top of the bumper to any part of the trailer. view full answer...
The trailer hitch part # 75894 is confirmed to fit your 2020 KIA Sedona. We have not had the chance to install the hitch onto a 2020 Sedona or a 2019 but the model years but we have sold a lot of these hitches to customers with a 2019 Sedona with no returns and also have a review from a customer who attached a picture of their hitch installed on their 2019 Sedona.
I reached out to Draw-Tite and they confirmed that the hitch does fit the 2019 Sedona but like us, they have not had a chance... view full answer...
Go To Results