The Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt # RP30035 are considered Industry Standard Rails (ISR) which means they are spaced 22" apart center-to-center (seen below). Because of this they will be compatible with the Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000lbs # C16115.
Because these rails are universal they will require you to drill into the frame of your vehicle to install which can be quite time consuming. If you could... view full answer...
The TS T-Slot Rails for Truck Hero Elevate Rack System - Full Size - X-Short Bed - 63inch - Aluminum Item # TH75FR is basically a rail system that allows a Truck Hero Elevate system to attach to several tonneau covers. This is compatible with the following covers:
BAK: G2, MX4, Revolver X2, and Revolver X4
Extang: Encore and Exceed
Retrax: One XR with T-slot and Pro with T-slot
Truxedo: Lo Pro, Pro X15, Sentry, and Sentry CT view full answer...
The Curt # C57WR truck bed extender isn't a vehicle-specific item, so Curt doesn't test fits on specific vehicles.
If the inside of the tailgate opening (jamb to jamb) is 60-1/2 inches, the bed extender would fit. However, this extender is designed for full sized trucks, So it's almost certainly going to be too wide to fit.
If you were needing the extender for longer items such as lumber, a hitch mounted load extender like part # MPG907 could be a good choice for you, assuming you have... view full answer...
Yes, you can plug your existing 4-way into the 4-way pigtail of the Buyers Products Trailer Connector Adapter part # 337TC1474P and ground the 7-way plug to a clean bare metal surface on the frame. You can tuck the black, blue and yellow wires away. The 4-way plug on the adapter will allow you to plug in a trailer that uses a 4-way trailer connector. view full answer...
There may be an option for you, but unfortunately there are no confirmed fits for the rear suspension of your 2007 Honda Ridgeline RTS 4WD. The Coil SumoSprings # CSS-1168R you were looking at are only confirmed to fit 2WD models.
With that said I recommend measuring the distance between the center coils of your rear coil springs with the vehicle on the ground. With this information I can check with SuperSprings to see if there is an option that will work with your vehicle. view full answer...
I spoke with TruXedo and they stated that your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX520601 actually uses a generic size as a bunch of other covers so you would need part # TX1117930 to replace your current tarp. view full answer...
What I recommend is the Shuttle Pad # SR26461. This is a tailgate pad and believe it or not they work quite well. Bikes stay in place, tailgate is protected, and you could use it for other items as well so as not to damage the tailgate on your 2019 Honda Ridgeline. view full answer...
The Extang Trifecta Signature 2.0 Soft Tonneau Cover part # EX94590 which is a fit for your 2019 Honda Ridgeline will sit on top of the bed rails therefore you will be able to fully open your in-bed trunk. Most covers that sit inside the bed rails will only allow for around 80% access but you don't have to worry about that with the Extang Trifecta Signature. view full answer...
I confirmed with the manufacturer that both Aries Grille Guards we carry for the 2021 Honda Ridgeline # AA6057 and # AA6057-2 will interfere with forward facing cameras and front censors. Although, Aries suggested that you might be able to take it to a Honda dealer to have them turn off the censors if wanted. With that being said, almost all grill guards (regardless of brand or model) will most likely interfere with front cameras and sensors. view full answer...
The length of the truck bed extenders like the Erickson Big Bed Load Extender for 2" Hitches part # EM07600 are not adjustable. That said, all you would need to do is move the load away from the cab in order for it to rest on both the bed floor and crossbar. It could then be tied down to keep if from sliding back and forth inside the truck bed. view full answer...
With the Thule GateMate Pro Tailgate Pad # TH823PRO there is no reason you could not use this to haul your Trek Verve+ 3 e-bike on your Honda Ridgeline. I would always be sure to remove the battery to prevent damage while being hauled. Remember the frame on your bike is providing the structural strength for the bike and the battery does not provide structural integrity to the frame.
Personally, I feel using a hitch rack like the Yakima OnRamp # Y36FR is a much better solution. This will... view full answer...
I reached out to Thule for clarification on the compatibility of the parts you have. They explained that the Thule WingBar Evo # TH711500 with the Evo Clamp Feet # TH710501 and Fit Kit # TH79RV you installed on your 2023 Honda Ridgeline are not compatible with the Adapter # THXADAPT11 you have on your Hull-A-Port 835PRO. That adapter was only compatible with the AeroBlade roof bars. You will instead need to use the 80mm Bolts # 915-068-054 which came with your 835PRO along with the cradle... view full answer...
Since your 2023 Honda Ridgeline has no rails on the roof, I recommend the roof rack by Rhino-Rack and it includes the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item # RRVA150B-2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs - Qty 4 item # RRRLKVA
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof item # DK470
This aero bar roof rack system has a 165 lbs capacity. The included locks will help... view full answer...
We have a couple of options for roof racks depending on whether or not your 2014 Ridgeline has the raised rails that run down the length of the roof. Both of these options have a 165 lbs capacity. I have listed them below:
For a naked roof with no rails.
Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06186
BaseClip... view full answer...
I checked with Yakima and the Mako Saddles and Yakima HullyRoller Roof Rack Kayak Carrier Y04035 will require you to use the Universal MightyMounts # Y03590 with your '19 Ridgeline; the other mounts you mentioned would not work.
If you were looking to secure your Mighty Mounts you can do so with Lock Housing # Y07220 and SKS Lock Cores # Y07204. view full answer...
The Tekonsha Primus IQ Trailer Brake Controller item # TK90160 is one of our lower end brake controllers that has less features. As far as economy controllers go this is the best option for the cost. It is extremely simple and has limited adjustability. It's pretty bulky and you have to be careful how you mount it because of the angle required for it to function properly. If you want to fine tune this brake controller for comfort you can not do it. That's what short distance is referencing.... view full answer...
It looks like you have the Dexter Trailer Hub and Drum Assembly part # 8-174-5UC3 which is for old 6,000 lb to 7,000 lb axles that have the 5 on 5" bolt pattern. If that is the case then you can use the Trailer Idler Hub Assembly part # AKIHUB-655-6-K and the 10-10 Grease or Oil Double-Lip Seals part # RG06-090 to switch to a more common 6 on 5-1/2" bolt pattern.
In order to confirm the above, you simply need to find the axle tag and look for the weight capacity and or serial number or... view full answer...
The Pop & Lock Custom Tailgate Lock - Power - Black # PAL8600 will work well on your 2017 Honda Ridgline. You will not be able to remove the back panel of the tailgate when it is closed and locked. I have not heard of this issue and they have been using this system since 2006 model years, but they do have a manual lock option you can add # PL6250 to replace the factory assembly to allow access in that circumstance. view full answer...
Yes, the Pop & Lock tailgate lock # PAL6100 will fit your 2007 Honda Ridgeline without backup camera. It actually fits with or without a backup camera! view full answer...
I have had the opportunity to install these universal mirrors on my truck and they fit well. I also went online to see how the mirrors are constructed on the Honda Ridgeline, and can see no reason why the universal towing mirrors would not work. At this time we have not had the opportunity to test fit this mirror on a Ridgeline though.
In my opinion, from actual experience, you would be better suited using the CIPA Deluxe Door Mount Mirror, # 11650. This mirror attaches to the window channel... view full answer...
Go To Results