Expert Answers about Infiniti QX80

• Installing A Brake Controller In A 2016 Infinity QX80
• If you have a factory 7-way on your 2016 Infinity QX80, then you will only need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti # 3050-P to get your Draw-Tite Activator IV Trailer Brake Controller - 1 to 4 Axles - Time Delayed brake controller # 5504 to function correctly. If you do not have the factory 7-way, then you will need to start with a 4 way connection. If you don't already have one, I recommend using the ZCI Circuit Protected Vehicle...
  view full answer...


• Trailer Brake Controller Connection Port Location in 2017 Infiniti QX80
• Your Prodigy P3 Trailer Brake Controller # 90195 will install in your 2017 Infiniti QX80 using the same wiring adapter part # 3050-P that was used in your 2014 model year vehicle. The connection port should be in the same general location as in the other vehicle but it will usually be tucked behind and/or taped to other wiring under the dash. It can be tough to spot this at first glance. The port location is typically behind the dash kick plate which is above and to the right of the brake...
  view full answer...