The Thule T2 Pro XTB 2 Bike Platform Rack # TH23JV is compatible with the Draw-Tite # 24931 trailer hitch that fits your 2017 Infiniti Q50 and you are certainly right that a bike racks that secure your bikes by the wheels like the T2 Pro will help protect the finish of your bikes.
The only potential issue is that when the T2 Pro is folded up, the closest part of the rack measures 5" from the center of the hitch pin hole and when we test fit a trailer hitch on a 2014 Q5 we found there was... view full answer...
Although the Rhino-Rack 2500 Series Legs are very similar to the Thule foot packs, the tab that fits into the Thule AeroBlade load bars is slightly too big and the grooves on the 2500 Series Leg do not sit flush with the AeroBlade load bar. I went out and tested them together myself.
If you already have the Rhino-Rack 2500 Series Legs # RRRLKVA, then for a complete roof rack on your 2014 Infiniti Q50 you will just need the Vortex Aero Crossbars, part # RRVA118S-2 for Silver or part #... view full answer...
I reccomend the Curt # C57WR Universal Truck Bed Exender which will fit nearly all full size pickup trucks including Chevrolet, GMC, Ford, Dodge, Ram, and Nissan, with standard 60" wide tail gates. (6.5 foot and longer beds) and provide 26-1/2 inches of additional bed length for storage and hauling. May not work with flare-style tailgates. Compatible with most tonneau covers view full answer...
I checked with Draw-Tite and they do show the Draw-Tite Sportframe Trailer Hitch Receiver part # 24931 as a fit for a 2018 Infiniti Q50 all models which includes the Sport. The hitch is a bolt-on fit that will be great for towing or hitch mounted accessories such as bike racks and cargo carriers. view full answer...
The Yakima HoldUp Bike Rack for 2 Bikes # Y02445 is the best option we have if you want a platform rack for your bikes. This rack measures 15" from the center of the hitch pin hole when folded up. This is the most narrow rack we have when folded. You would just need to measure 15" out from your hitch pin hole to see if this will fit. I have also included a video that shows this rack being measured when folded.
If the HoldUp rack will not work, we do have a hanging option. The Yakima RidgeBack... view full answer...
To carry a bike rack with the Draw Tite part # 24931 you would not need to also get a draw bar as that's a product only for towing.
The hitch is all you'd need with your sons bike rack and you'd be set. view full answer...
We can get a fit that works for you with an added accessory. Your Kuat NV 2.0 Bike Rack for 2 Bikes, part # NV22B, is a 2" bike rack. But your Curt Trailer Hitch Receiver, part # C11407, is a 1 1/4". In order to make this work you will need a hitch adapter.
You can fit your 2" bike rack to your 1 1/4" hitch with the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver, part # HTAD. It will work with your Class I hitch receiver to give you the ability to attach 2" accessories to your vehicle.... view full answer...
It does; I verified directly with the manufacturer for you that the Draw-Tite hitch does fit your 2019 Infiniti Q50 Sport, with the correct part number being the following:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24931 view full answer...
The 2019 Infiniti Q50 and the VW Taos would use completely different hitches, so unfortunately the hitch from your Q50 couldn't be repurposed for your Taos.
For the Taos, I'd recommend the Draw-Tite # DT79GR. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # C59236, a ball mount like # 2753 and a # 40038 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball. view full answer...
According to Draw-Tite their Sportframe Trailer Hitch Receiver # 24931 fits all models including the Red Sport trim on your 2019 Infiniti Q50. Draw-Tite recommends using the Ball Mount # 3592 with a 1-7/8" # 19257 or 2" # C40018 hitch ball. You will be able to hold the ball mount using a Pin and Clip # F-4 or you can secure it with the trailer using the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set # 3794DAT.
The Curt T-Connector Vehicle Wiring Harness # C56248 will provide... view full answer...
Reese and Draw-Tite are both owned by parent company Horizon Global. Reese trailer hitches have been rebranded under the Draw-Tite name.
The best Draw-Tite Hitch for your 2014 Infinity Q50 Hybrid is going to be item # 24931. This hitch is custom fit and bolts directly to your Infinity with included hardware.
This hitch has a 1-1/4" receiver and the crossbar is concealed behind your rear bumper. view full answer...
Although we haven't test fit the Kuat Sherpa 2.0 on a 2018 Infiniti Q50 it should be compatible. Really the only thing you need to check as far as compatibility goes is that there is enough rear bumper clearance for you to fold the bike rack up.
The distance from the center of the hitch pin hole to the Sherpa 2.0 is 11" when it is folded down and then is reduced to 7-1/2" when the bike rack is folded up. This should be more than enough clearance and you can verify this by simply measuring... view full answer...
I reached out to my contact at Draw-Tite who said that they haven't had any reports of fit issues with the 2015 Infiniti Q50S and the Draw-Tite Sportframe Trailer Hitch Receiver # 24931. We have learned that the Curt # C11407 isn't confirmed to fit. Since the Draw-Tite is basically the same design I kind of doubt it will fit either.
Aside from that what you'll need to do is check out the dimensional diagrams I am attaching to this page and compare them with your Q50S to see if it matches... view full answer...
Yes, the Inno Kayak Lifter Load Assist part # INA453 will work with all of the Yakima crossbars which includes the Yakima JetStream Crossbars like part # Y00425, the Yakima CoreBar Crossbars like part # Y00423, and the Yakima Round Crossbars like part # Y00408. view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11493 is the only hitch available for the 2015 Infiniti Q60, but it will only work if your Q60 is a coupe. The Kuat Beta Bike Rack for 2 Bikes - 1-1/4" Trailer Hitches - Tilting # B202-114 would fit great on this hitch.
If you don't have a coupe, then I do have a solution for you to be able to carry bikes.
I recommend the Thule Gateway Pro 2-Bike Rack, part # TH88VR. This is a trunk mount rack that has a 70 lb weight capacity... view full answer...
Go To Results