Expert Answers about Honda Passport fit

Expert Answers about Honda Passport

Will the Curt Hitch C13421 Interfere With the Lift Gate Sensor on a 2021 Honda Passport
Though the Curt # C13421 will definitely fit your 2021 Honda Passport, installing any hitch may interfere with Hands-free Liftgate sensors and functionality may be very limited or possibly lost. However, it is exceptionally rare for the use of the sensor to be completely lost. Typically you will just need to mess with it a little to find the spot where your foot will activate it and you will be good to go. If you check out the install video I included, the sensor is talked about as well.
view full answer...

Can The Saris SuperClamp EX 2 Bike Platform Rack Support 2 Electric Bikes?
The Saris SuperClamp EX 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Wheel Mount # SA4025F is in fact setup for transporting most electric bikes. It has a weight capacity of 60lbs per bike which is enough for the majority of electric bikes, and it fits bike tires up to 4-1/2" wide. If the bike's tires are wider than 4-1/2" then you can add Fat Bike Kit # SA4419 which allows for up to 5" wide tires. One thing to keep in mind is that this bike carrier may not work with some bikes that have...
view full answer...

Trailer Hitch Receiver Fit For 2021 Honda Passport
There is a trailer hitch receiver fit for your 2021 Honda Passport, with the best option being from Draw-Tite because it has the best bumper clearance, and because it has the best chance to allow your hands-free liftgate to work. The correct part number for that hitch on a '21 Passport is the following: - Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 While it is possible that the hands-free liftgate can be lost, it does still work for most people by kicking your foot to the side...
view full answer...

Trailer Hitch Receiver And Wiring Harness For a 2022 Honda Passport TrailSport
The Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 for your 2022 Honda Passport is confirmed by Draw-Tite to fit all models including your TrailSport. The rear fascia and undercarriage of your TrailSport look identical to the chassis on the 2021 we installed on and have linked the installation video below. Yes the mounting holes that you have identified on your Passport are the ones for this receiver. We have a 4-Way Curt T-Connector Vehicle Wiring Harness # C56291 available for use...
view full answer...

2019 Honda Passport Rhino-Rack Sport-Style Roof Rack for Naked Roof
Yes, the Rhino-Rack ROC25 Roof Rack # RR44QJ is exactly what you need for your 2019 Honda Passport bare roof. This has a weight capacity of 165 lbs and comes with everything you need to install this on your vehicle. Attached is a review video for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make a recommendation for you!
view full answer...

Will The Draw-Tite Or Curt Trailer Hitch Receiver Sit Behind The OEM Panel On a 2022 Honda Passport?
Both the Curt Trailer Hitch Receiver # C13421 and Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 will have the cross tube that sits behind the removable cover on your 2022 Honda Passport, but the receiver tube itself will still be exposed. This does save you from having to remove the panel and store it when you are needing to use the receiver. While both the receivers are nearly identical I do prefer that the Draw-Tite # 76290 already has the tab welded on for attaching either a 4-Way...
view full answer...

Correct Hitch From Curt for a 2022 Honda Passport and Wiring Harness
The correct hitch from Curt for your 2022 Honda Passport is going to be the Curt Trailer Hitch Receiver # C13421. This hitch from Curt is a confirmed fit on all models of the 2022 Honda Passport. The correct wiring harness for your Passport is going to be the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat # C56291. This T-Connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, on the driver's-side. You will need to remove all floor coverings...
view full answer...

Does the Hands Free Tailgate Function Work w/ a Hitch on a 2023 Honda Passport?
Yes, it will but you'll lose some functionality by the 2" receiver. All of the hitches available for the 2023 Honda Passport block the sensors by the 2" receiver somewhat. What you will need to do is kick to the left and right of the center to find a spot not blocked. The etrailer Hitch item # e44AR you were looking at is confirmed to fit your 2023 Honda Passport. It is custom fit and bolts to your vehicle with included hardware. This is a class III hitch with a 2" receiver. I have...
view full answer...

Recommended Hitch for a 2023 Honda Passport
The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item # C13421. This hitch is custom fit and bolts to your Honda with included hardware. I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely leaving only the 2" x 2" receiver visible. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. I have linked a couple of pictures below along with an installation video so...
view full answer...

Trailer Hitch Receiver Fit For 2023 Honda Passport
There is indeed a trailer hitch receiver that fits your 2023 Honda Passport, from Curt. I verified this fit directly with the manufacturer for you, with the correct part number being the following: - Curt Trailer Hitch Receiver # C13421 The # C13421 is about as easy an install as there is for a hitch, as all you have to do is lift it into place and secure it with the included bolts. This will give your '23 Passport a hitch with a 5,000 lb towing and hefty 750 lb tongue weight capacity...
view full answer...

Is 10k Curt MV Weight Distribution Too Wide For V-Nose Trailer
The 10,000 lb Curt MV Weight Distribution System # C17052 isn't too wide for your trailer but it may be too long. A lot of times with V-nose trailers what ends up happening is you have to install Chain Hangers for Curt Weight Distribution Systems - Bolt On # C17005 on your trailer frame. The arms of the # C17052 are 31-1/2" long so you'll need about that much distance on your frame rearwards to use the system, otherwise you'll need to use the chain hangers. Then for a hitch ball use part...
view full answer...

Is The Thule Force XT L Roof Box Compatible With A 2019 Honda Passport With Factory Rails?
As long as the cross bar spread on your 2019 Honda Passport is between 23-5/8" and 33", the Thule Force XT L Rooftop Cargo Box - 16 cu ft - Black AeroSkin Item # TH6357B is compatible. I have confirmed through Thule's fit guide that this roof box does fit your vehicle. This roof box is compatible with just about any crossbar because it clamps around the bar. The spread would be the only concern.
view full answer...

Best Brake Controller For 2019 Honda Passport
I recommend the Curt Echo part # C51180 for the 2019 Honda Passport because of its easy installation. There are not any factory brake controller adapters available for the 2019 Honda Passport as of yet. I took a look at your owner's manual and a traditional brake controller like the Primus part # TK90160 would have to be hardwired from the brake controller to the 4-pin gray connector under the instrument panel near the top of the parking brake pedal until there is an after-market adapter...
view full answer...

Will a Trailer Hitch from a 1997 Honda Passport Fit a 2002 Honda Passport w/Rear-Mounted Spare Tire
The 1997 Honda Passport and 2002 Honda Passport (with door-mounted spare) use different trailer hitches so they are not interchangeable. There is just one trailer hitch confirmed to fit the 2002 Passport with the spare tire on the rear hatch. It is Curt trailer hitch # C13235. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
view full answer...

Is a Hands-Free Relocation Sensor Bracket Needed for Curt Trailer Hitch on 2019 Honda Passport
The Curt Trailer Hitch Receiver part # C13421 is a fit for a 2019 Honda Passport and will work on models with the hands-free tailgate sensor. That said, the sensor may be limited or restricted in use so in order to fix this you can obtain a relocation bracket from Honda, the Hands-Free Power Tailgate Sensor Relocation Bracket 08L91-TGS-100A. In order to complete the towing setup you'll need the Curt T-Connector Vehicle Wiring Harness part # C56291 to activate the trailer lights and the...
view full answer...

Will Trailer Hitch for 2019 Honda Passport Interfere with Hands-Free Liftgate
The Draw-Tite Max-Frame Trailer Hitch # 76290 that fits your 2019 Honda Passport can interfere with the hands-free liftgate feature. You will likely have to kick your foot to one side of the receiver as opposed to the middle or it could be lost. This is a Class III hitch with a 2 inch receiver and a 6,000 lb towing capacity with a hefty 900 lb tongue weight capacity though you should always be sure to verify your Passport's towing capacity in your owner's manual. I have added a link to...
view full answer...

Will the Konig Easy Fit SUV Chains Fit on a 2019 Honda Passport With 265/45r20 Tires?
The Konig Self Tensioning Low Pro Snow Chains # TH04115265 are a low profile chain that is Class S compatible- meaning that they are designed for vehicles with limited clearance in the wheel wells. These chains require 10mm of clearance in the wheel well. I've linked one of our review videos that shows these chains being used on a Jaguar SUV with extremely low clearance in the wheel wells to give you an idea of how low profile they actually are!
view full answer...

Does Curt 7-Way Require Mounting Bracket For 2021 Honda Passport With OEM Trailer Hitch
From what I saw of the OEM trailer hitch for your 2021 Honda Passport, it does already have the mounting area like you said, and will in fact line up with the Curt harness, so you will not need a mounting bracket. The correct Curt 7-way for your 2021 Passport is the following: - Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # CU86FR
view full answer...

Curt Trailer Hitch Confirmed to Fit the 2022 Honda Passport
Yes, the Curt Trailer Hitch Receiver # C13421 is confirmed to fit all models of the 2022 Honda Passport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bikes racks, cargo carriers and ball mounts. If you plan to do any towing, you can pick up the Curt T-Connector Vehicle Wiring Harness # C56291 and the etrailer Ball Mount Kit # 989900 to round out...
view full answer...

Does Coil SumoSprings Kit part # CSS-1125R Fit 2020 Honda Passport Elite
Since the Elite model of the 2020 Honda Passport is AWD the Superspring kit part # CSS-1125R does not fit as it only work on the front wheel drive models.
view full answer...