Since the Swagman ST-Two S80200 does not come with cradles you need to secure your bikes to the rack with bungee cords like the Erickson # EM06623 or any other secure tie-down method you are comfortable with.
However, I highly recommend going with a 3-bike trunk mount rack that does have cradles to secure your bikes and ensure they don't make contact with your 2018 Kia Optima or each other. The Yakima HangOut # Y02638 is a confirmed fit for a '18 Optima and uses StableCradle anti-sway... view full answer...
The Curt Trailer Hitch Receiver # C11025 is a confirmed fit for your 2012 Kia Optima. Installation of an aftermarket trailer hitch or any other part will not void the warranty as consumers are protected by the Magnuson-Moss warranty act that states, in part, that unless the part added actually causes a problem, then installation and use of the part will not void the warranty.
I've attached a video of the installation as well as the instructions to assist. If you will be using this hitch... view full answer...
The Upgraded Circuit Protected Taillight Converter Hardwire Kit, # 119178KIT, is designed to fit many different vehicles, Because of this, specific vehicle instructions are not available. However, I can explain the process for you.
First, you will need to gain access to the taillights on your 2002 Kia Optima. The harness has 5 wires that need to be spliced into the vehicle taillights. Start by mounting the converter box on a clean, flat metal surface. Use an existing ground point to ground... view full answer...
In general bike rack manufacturers recommend removing a bike rack from the vehicle when not in use. That would include the Swagman XC, # S64650. But a lot of people leave the racks installed all the time too. I always remove mine when I am done with it for the day but I don't go out biking much. Someone who bikes several times a week would benefit more from having the rack installed all the time.
What you have to watch out for is the hitch pin or bolt seizing up in the hitch receiver because... view full answer...
Installing a trailer hitch receiver like the Draw-Tite Sportframe # 24965 (which is a confirmed fit for your 2018 Kia Optima EX) will not void your manufacturer's warranty.
Consumers of aftermarket products (like a trailer hitch receiver) are protected by the Federal Magnuson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle... view full answer...
I checked the online manual for your 2013 Kia Optima and didn't see anything about recreational dolly towing, only emergency dolly towing. While the manual didn't give any distance restrictions for dolly towing it is always best to confirm whether it is safe or not with a Kia dealer.
If it is okay then you simply need a tow dolly and then some lights. Tow dollies tend to have lights on them but it helps to have some extra lights to make sure people around you can tell what you are doing.
For... view full answer...
The Kat's Heaters engine block heater for the 2013 Kia Optima is part # KH11812 and Kat's recommends installing it in the block expansion port at the left/front of the engine (driver's side front). Here are the install instructions from Kat's.
Cartridge Heater Installation
1. Located cartridge hole on the engine block .
2. Clean cartridge hole of all debris. Use compressed air.
3. Coat hole and cartridge with silicone to ensure heat transfer and seal hole from water.
4. Attach cord to... view full answer...
Go To Results