Expert Answers about Mitsubishi Montero

• Where to Mount Stabilizing Strap on a 1991 Mitsubishi Montero for a Bike Rack and Curt Trailer Hitch
• When using a bike rack or cargo carrier with the Curt Trailer Hitch, # 12181, on a 1991 Mitsubishi Montero, you can use Curt Bike Rack Strap with Cambuckle, # 18050. Or, you can use another type of strap, like bungee straps, # EM06664, # EM06656, # EM06658, # EM06668, or ratchet straps, # EM34423, to help support the rack. Basically, any type of strap that will help support the rack will work. Ideally, you would want the strap to be connected to a point on the vehicle that is higher and/or...
  view full answer...


• Installation of the Draw-Tite 75116 Class 3 Trailer Hitch On a 2006 Mitsubishi Montero
• Drilling is not required for installation of the Hidden Draw-Tite Class III Trailer Hitch, item # 75116. This hitch has a square cross tube and has two mounting flanges welded to the front of the cross tube to reattach the rear fascia to after installation (see instructions). There are no extra plates or holes for mounting electrical connectors. You may be seeing a typical photo on other sites, our photos unless specified otherwise are of the actual hitch. I have listed below some items...
  view full answer...


• Trailer Hitch and Installation Help for 1990 Mitsubishi Montero
• All of the trailer hitches we supply include the necessary hardware for installation. The particular hardware supplied is based on the requirements of each specific vehicle and will ensure that the hitch's full capacity can be realized when installed as per the manufacturer's instructions. This is true for the Curt Class II hitch for your Montero, part # C12181. The Curt hitch uses 12 mm x 30 mm bolts with a 1.25 thread pitch. The two linked articles will give you many useful tips for...
  view full answer...


• How to Install Tekonsha P3 Electronic Brake Controller, Part # 90195, in 2001 Mitsubishi Montero
• Brake controller installation requires the following items: a brake controller, a 7-Way or 6-Way installation kit, either part # ETBC7 or # ETBC6 (depending on which connector is on your trailer) and a flat 4-pole trailer connector if one is not already installed at the rear of your Montero. The 4-pole trailer connectors are vehicle specific; the part for your Montero is # C55380. I have included links to all of these parts. Installation of a brake controller is described in the three...
  view full answer...


• Determining Tail Light Wire Functions to Install Curt Harness # C56175 in 1995 Mitsubishi Montero
• Since the wire colors used by vehicle manufacturers are not always consistent, your best option to identify which wires to connect to your Curt Trailer Wiring Harness # C56175 is to use a circuit tester such as # PTW2993 to identify each wire by its function. Wire color alone is not a reliable way to identify function. With a helper on hand to activate the vehicle lighting functions for you (one by one) apply the grounded circuit tester to each wire at the driver-side taillight assembly...
  view full answer...