The Inno Square Bar Roof Rack for your 2016 Lincoln MKX with the bare roof, which consists of # INB137 for the two 54 inch Square Crossbars, # INSUT for the Inno Feet, and # INK676 for the Fit Kit, is a great choice.
This will provide you with an economical yet durable and versatile setup that will work perfectly to secure your existing Yakima Rocket Box or other accessories such as a bike rack or kayak carrier you may want to mount in the future. The mounting feet and clamps allow for... view full answer...
For your 2014 Lincoln MKX the hitch I recommend is the etrailer hitch part # e98870 as this is a USA made hitch with more than enough capacity for your vehicle, is priced great, and only has the hitch opening hanging below the rear bumper which means it's mostly out of plain sight.
The best trailer wiring option is the Tekonsha kit part # 118519 because it's easy to install and comes with a very reliable converter box. I attached an install video for this kit for you to check out as well.... view full answer...
Ultra-Fab Ultra Scissor Jack, part # UF48-979002, is designed for stabilizing and not for lifting the trailer. These can be mounted to the trailer and after you have used a landing gear to position the trailer at the correct height you can use these jacks to help eliminate tilting and sinking. The footplate measures 4-1/2 inches by 9 inches.
The combined support capacity for these jacks is 13,000 lbs or 6,500 each. You can take a look at the product review video for these scissor jacks... view full answer...
You can flat tow your 2015 Lincoln MKX with all 4 wheels on the ground. This information is located in the recreational towing section of the vehicle owner's manual, page 221.
There are 5 major components needed to flat tow a vehicle: base plates, tow bar, safety cables, lighting, and supplemental braking.
For base plates you can use # 4408-1 if your MKX does NOT have adaptive cruise control. Or you can use # 4408-5 if it does have adaptive cruise control.
For a compatible tow bar I... view full answer...
For your 2010 Lincoln MKX I recommend the Curt Trailer Hitch, part # C13067. This is a Class lll hitch and has a 2 inch receiver opening. I have included a link to an installation video for this hitch you can check out. A strap like part # 18050 is required when using this hitch.
If you're looking for a hitch that doesn't require the support strap then I recommend the Draw-Tite, part # 75992. I also like this hitch because the cross tube is completely hidden behind the vehicle's bumper... view full answer...
Yes, the heat shield will need to be removed on a 2018 Lincoln MKX for the installation of a trailer hitch. It's the same for the etrailer part # e36RR, Curt part # C78KR, and Draw-Tite part # 75234. I recommend the etrailer hitch due to the matte finish which blends in better with the underbody paneling on the vehicle. It also features a bolt-on install and hidden design. The removal of the heat shield won't have an affect on the vehicle. view full answer...
There is one high-quality roof rack that will work on your 2016 Lincoln MKX with a naked roof and panoramic sunroof from Inno, which consists of:
- Inno Aero Crossbars # INXB138-2
- Inno Through Feet for Aero Crossbars # INXS250
- Custom Fit Kit for Inno # INK676
This roof rack uses aero crossbars that measure 3-1/8" wide x 1-1/8" tall which are the same dimensions as Thule bars such as the WingBar Evo so your Thule cargo box will fit. The fit kit does have pads to protect your the surface... view full answer...
With the set up on your 2013 Lincoln MKX, you best option will be to install the T-One Vehicle Wiring Harness, # 118519, and then use the Tow Ready 4 Pole to 5 Pole Wiring Adapter, # 20036.
This the adapter will connect your 4 pole vehicle plug and 5 pole plug on your trailer. The trailer lights will be connected to your vehicle. The extra wire then can be wired up to the battery to power your air compressor. Depending on the amp draw of your compressor, I also recommend you wire in a... view full answer...
In order to flat tow a 2014 Lincoln MKX you will need a base plate kit, tow bar, supplemental braking system, safety cables, a flat-tow wiring harness, and a few other smaller items. Although we do not sell a complete all inclusive kit, I have attached for you below a list of all the parts that you will need.
Roadmaster Base Plate Kit part # 4408-1 (Without Adaptive Cruise Control) or part # 4408-5 (With Adaptive Cruise Control)
Roadmaster Nighthawk All Terrain Non-Binding Tow Bar part... view full answer...
Yes, the Camco Vinyl Tire Covers # CAM45332 that you referenced will fit your tire size of 205/75-14. These actually can fit tire diameters up to 29 inches so yours being 26.1 inches in diameter would not be an issue at all. view full answer...
A hitch from a 2010 Lincoln MKX SHOULD fit a 2013 model. It looks like the hitches like the Curt Hitch part # C13067 fit the 2013 MKX also fit 2007-2015 MKX's so you should be just fine.
Hitch hardware is considered one time use so you will need to replace the hardware with part # RHK. You will need to enter the part number and manufacturer on the product page and we will ship you out the correct hardware. view full answer...
When installing the Inno Aero Crossbars part # INXB138-2, Inno Through Feet for Aero Crossbars part # INXS250 and the Custom Fit Kit for Inno Crossbars part # INK676 we must follow the installation instructions exactly. This is where the rack was designed to to be installed and tested for performance.
Mounting it in any other location would void the warranty and may lead to damage occurring to your 2017 Lincoln MKX. view full answer...
We have not had any issues with weight distribution systems bending trailer frames. If your trailer happens to have an aluminum frame that could be an issue though. You would need to check with the trailer manufacturer if the frame is aluminum to see if that would still be recommended.
If your travel trailer weighed 3,700 lbs the tongue weight would be between 370 and 555 lbs. The FastWay E2 part # FA94-00-0800 would be perfect for that tongue weight range. Especially if you consider the... view full answer...
Since your 2016 Lincoln MKX has that spoiler piece at the top of the rear hatch there is only one trunk mount bike rack I recommend. Take a look at the Hollywood Racks Over-the-Top rack # HRF2-3. This rack has an additional upper arm piece that moves the top straps up and over that spoiler so no weight is put on it (since the spoiler is not meant to support weight). I have included a link to a video that shows how it works.
If you will be carrying any bikes that do not have a top frame... view full answer...
The best trunk mounted bike rack for your 2015 Lincoln MKX is the Thule OutWay part # TH45JV.
only 2 retractable coated steel cables to attach to the vehicle rather than the 4-6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer.
The cables store inside the rack so there are no loose straps ends to flap around. The cables can also be locked into position to deter theft of the rack. And there is also an integrated cable lock in the last... view full answer...
A great option for a roof rack on your 2018 Lincoln MKX is the Inno Roof Rack because it is low-profile with a refined look as well as being a highly effective rack. This roof rack consists of the following parts:
- Inno Aero Crossbars # INXB115-2
- Inno Flush Feet for Aero Crossbars # INXS200
- Custom Fit Kit for Inno # INK676
This roof rack will look graceful atop your '18 MKX due to the aerodynamic shape of the crossbars and the fact that they do not extend past the sides of your Lincoln;... view full answer...
The owners manual for a vehicle is the final authority on whether it can be flat towed. If it does not make any mention of the steering wheel lock you'd most likely be able to assume that it's fine and you'd not need to worry about it. You can test this by turning the wheel of the vehicle. If it's not locked you're fine as-is. If it is locked you may have to put the ignition in ACC mode which on a push to start vehicle requires pressing the start button without your foot on the brake.
For... view full answer...
Since you have a 2014 Lincoln MKX and a Blue Ox tow bar the correct base plate kit you'd need is the part # BX2625 which fits with and without adaptive cruise control. Since your motorhome has air brakes the supplemental braking system you'd need is the SBS Air Force One part # SM99243.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight... view full answer...
It sounds like you need a flat-towing wiring harness to allow your motorhome to control the lights on the towed MKX. There are several options for flat-towing lighting and these vary in cost, complexity of installation and in how permanent that installation is.
With a brand new vehicle like your MKX you can consider a set of magnetic lights like # TLL21RK, which uses a 4-pole flat type connector. This kind of lighting kit means you do not have to cut into the brand new car's wiring or... view full answer...
Actually, in our fit guide we list the # 524447-4 base plates as being a fit for the 2016 Lincoln MKX regardless of whether it has the EcoBoost engine or the Adaptive Cruise Control with no mention of the air shutters. The base plate is indeed a fit for vehicles with the Active Air Shutters, and I'll have that information clarified.
According to my research, your 2016 Lincoln MKX is capable of being flat towed, but exceeding 65 mph is not recommended. There are very specific flat towing... view full answer...