Expert Answers about Lincoln MKT

• Plug and Play Trailer Wiring Harness Fit for 2015 Lincoln MKT.
• I checked with Curt and the Curt T-Connector Vehicle Wiring Harness # C56095 that you referenced is confirmed to fit your 2015 Lincoln MKT. This wiring harness will plug in behind your vehicle's taillights to provide stop, turn, and tail light signals for the trailer wiring. The harness features a powered converter so that the trailer taillights do not pull power from your vehicle's light circuits, so the power wire will need to be routed to the vehicle's battery. I have linked the installation...
  view full answer...


• Trailer Hitch Receiver, Wiring Harness & Mounting Bracket For 2010 Lincoln MKT EcoBoost
• We do have everything you need for a trailer hitch receiver, wiring harness, and mounting bracket for your 2010 Lincoln MKT EcoBoost; I'll go ahead and list out all the parts for you: - Curt Trailer Hitch # C13110 - Curt T-Connector Vehicle Wiring Harness # C56095 - Mounting Bracket 4-Pole Flat # 18144 - No-Drill Mount for Electrical Mounting Bracket # 18140
  view full answer...


• Will XL Anti-Rattle Locking Hitch Pin Work on a 2 Inch Hitch?
• The # SHP2040-XL can be used on a 2" hitch; in fact the linked demonstration video shows it being used in a 2" hitch though it should be noted that it has an overall length of 6-3/4" and an inside pin length nearly 1 inch longer than the # 63232 so it will stick out on the side of your hitch like in the attached photo. It is also recommended you use Loctite Anti-Seize Stick # LT37616 to lubricate the threads before use. I have added a pair of reviews on this hitch lock for you to take...
  view full answer...


• Which Roadmaster Tow Defender Will I Need For My 2015 Lincoln MKT?
• To determine what Roadmaster Tow Defender to use on your 2015 Lincoln MKT you will need to first determine what Roadmaster base plate you are using. For the Roadmaster Crossbar-Style Base Plate Kit # RM-524439-4 you will need the Roadmaster Tow Defender Protective Screening # RM-4700. This will only work with the Roadmaster crossbar style base plates. A Roadmaster Guardian Rock Guard # RM-4000 can also be added with this Tow Defender for the ultimate front end protection. For the Roadmaster...
  view full answer...


• Trailer Wiring Harness That Fits 2011 Lincoln MKT
• The correct trailer wiring harness that fits your 2011 Lincoln MKT is the T-Connector Vehicle Wiring Harness # C56095. I have added a link to a video which shows this harness being installed on a 2016 MKT, which is the same generation as your 2011 so the install will be the same. In regard to installation we aren't affiliated with anybody, but any type of local certified mechanic or auto shop will be able to perform this install. The this is a simple install relative to some of the work...
  view full answer...


• Will etrailer e52AR Trailer Hitch Fit 2010 Lincoln MKT without EcoBoost?
• The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" Item # e52AR you referenced will fit the 2010 Lincoln MKT both with EcoBoost, so it will not work for you on your MKT. Instead, you would want the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13000. I have attached the installation instructions for the hitch for you. If you are interested in towing a trailer with your MKT, you will also want a wiring harness, like the Curt T-Connector...
  view full answer...


• Trailer Hitch Recommendation for a 2012 Lincoln MKT
• The Draw-Tite trailer hitch # 75679, will indeed fit the 2012 Lincoln MKT. The fact that the vehicle has left and right side dual exhaust is covered in the instructions which I have linked for you to view. The hitch cross tubing and receiver will be visible below the rear fascia of the vehicle once installed. I have also included a link to a video that shows a typical installation for you. I also recommend the etrailer ball mount kit, # 989900, which comes with 2 ball mounts, 2 balls,...
  view full answer...


• Trailer Hitch For 2018 Lincoln MKT For Towing a 4,000 Lb Trailer
• I was able to confirm that the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75679 is a fit for the 2019 Lincoln MKT which is the only option. It is a great option with a custom fit design that does not require drilling into the frame of the Lincoln MKT. This will give a 2" receiver on the Lincoln that can tow 4,000 lbs however you do want to check the owner's manual to make sure you can tow 4,000 lbs safely. For the trailer wiring, I recommend 7-way plug part # A10-7072VP which will...
  view full answer...