bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Lincoln MKC


  • Bike Rack And Trailer Hitch Confirmed To Fit A 2015 Lincoln MKC
  • Yes the Hollywood Racks Destination Bike Rack # HLY94FR that you inquired about will work great with your Electra Loft 7D cruiser bikes, as this rack has a maximum weight capacity of 35-lbs per bikes (yours clocks in at 30-lbs), and has a maximum wheelbase width of 48" (yours comes in at 42"). Along with your Electra Loft bikes being compatible, this bike rack is also a great fit for your 2015 Lincoln MKC, and with this bike rack being only 20-lbs you shouldn't have any issues lifting...
    view full answer...

  • Recommended Ski and Snowboard Carrier for a 2015 Lincoln MKC With a Panoramic Sunroof
  • The only crossbars that'll work with your 2015 Lincoln MKC, is the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. These crossbars measure 48" long and has a max weight capacity of 150 lbs. You could always install a hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75943 if you don't have one already and use the Thule Tram Ski and Snowboard Carrier Adapter for Hitch Bike Racks # TH9033 for the Thule Hitching Post Pro Bike Rack for 4 Bikes # TH934XTR.
    view full answer...

  • Wiring Recommendation for a 2015 Lincoln MKC Towing a Boat Trailer with 5-Way Connector
  • Since your 2015 Lincoln MKC didn't come with the factory tow package you need the Tekonsha T-One # 118284 for the basic trailer light functions. Then typically when a boat trailer has a 5-Way wiring harness that means it has a hydraulic actuator with an electric lockout. If this is the case then all you need to complete your wiring is the Tow Ready # 20036. This plugs into your 4-Way and then includes an extra wire that you connect to your reverse wire. If you still wanted to install a...
    view full answer...

  • Which Ballmount for Curt C13194 Class III Hitch on 2019 Lincoln MKC
  • When we installed the Curt Class III hitch, part # C13194 on a Lincoln MKC, we found that the inside top edge of the receiver sat 12-1/2 inches above the ground. The the bottom edge of your boat trailer sits at 16 inches with the trailer level, you'll want to use a ball mount with a rise to raise the trailer ball by about 4 inches. That way, once the trailer is hitches up, the rear of the vehicle will squat a bit which will place the trailer very close to level. I'd recommend the Curt...
    view full answer...