Expert Answers about Acura MDX
- Availability of a Trunk Mounted Bike Rack to Fit a 2017 Acura MDX
- We carry several trunk mounted bike racks that will work well on your 2017 Acura MDX.
We offer 1,2, and 3 bike trunk mounted racks. I recommend going with a 3 bike rack like the Yakima FullBack 3 Bike Rack, # Y02633. Using a 3 bike rack will allow you the extra carrying capacity if you by chance need to carry an extra bike. Also the FullBack has a 90 lbs weight capacity when carrying 3 bikes.
What I like the best about the YakimaFullBack bike rack is, unlike most trunk mounted racks,...
view full answer... - 2022 Aura MDX Trailer Hitch Receiver
- The Curt Trailer Hitch Receiver # C22HR is made specifically for the 2022 Acura MDX. The height of the top opening will vary from different trim levels as they have different panels that change the appearance and heights.
If your spare is larger than an 18" wheel then your spare and the standard wheel will not fit under the back of your MDX with the hitch installed.
You may or may not require the Hands Free relocation kit that Acura Sells for your MDX. It hasn't been confirmed to work...
view full answer... - Available 4-Pole Wiring Kits for 2012 Acura MDX and Part Needed to Convert to 7-Way
- The wiring harness kits we offer for the 2012 Acura MDX are the 4-pole type, such as Tekonsha # 118424 and the others shown on the linked page. These can be used with a 5-pole adapter such as # 20036 which allows, for instance, connection to the vehicle reverse light circuit to activate a trailer coupler's electric reverse lockout.
4-pole wiring carries only basic trailer lighting signals but it is easy enough to convert 4-pole wiring to a fully-functioning 7-way (with the three additional...
view full answer... - Adapting 7-Way Trailer Connector on 2010 Acura MDX to Accommodate 5-Pole Flat Connector
- We have exactly what you are looking for, the 7-Way to 5-Pole Flat Adapter, part # A75TB. This adapter is your basic 7 to 5-Pole adapter. We have many others to choose from, I have included a link to all the other available options below.
view full answer... - Recommended Setup to Haul Two 105 lb Mopeds With 2011 Acura MDX
- I do have a solution for you, but there are no bike rack options that will hold up two 105 lb Mopeds. It is just too much weight.
What you will need to do is get a small utility trailer, like the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7, and haul your Mopeds around in that. To do this with your 2011 Acura MDX you will need a trailer hitch receiver, a ball mount and hitch ball, and a trailer wiring kit.
If you do not already have a trailer hitch receiver I recommend going...
view full answer... - How Does Washer Face when Installing Curt Hitch # C13146
- You'd want to put the convex side of the washer against the bolt head of the hardware that comes with the Curt hitch # C13146 when installing it. That way the head pushes it flat as you tighten it which acts as a lock nut.
view full answer... - Keyed Alike Lock Option for Global Link Locks
- We do offer Global Link lock parts like # 295-000077 which is a cam lock cylinder that can be ordered in multiple that are keyed alike. This service can be selected on the item's page using the drop-down menu tool's KEYED ALIKE option. There is a small upcharge for this service.
view full answer... - Yakima Roof Rack With 58 Inch Crossbars For 2010 Acura MDX
- For your 2010 Acura MDX, there is a Thule 58 inch cross-bar option. If you have the factory installed tracks, you can use the Round 58" CrossBars # Y00409, SkyLine Towers # Y53TR, RoundBar SL Adapter # Y03536 and Landing Pad 9 for Yakima Control Towers # Y00229.
If you have a naked roof (no existing rails) there is a Yakima Roof Rack with 58 Inch bars # Y00409, BaseLine Towers # Y28TR, Fit Kit # Y06150 and # Y06151
Either roof rack will give you a very nice and clean roof rack with a...
view full answer... - Is There A Ramp Attachment For The Kuat Sherpa 2.0
- The Kuat Sherpa 2.0 # SH22G is a great bike rack. I have been using a Kuat NV for the last few years and I love it. Unfortunately, Kuat does not make a ramp for the Sherpa 2.0. The Sherpa can only hold two bikes weighing up to 40 lbs apiece. So this would not work for heavier e-bikes.
On that note, I will say that the Kuat NV 2.0 would be a perfect bike rack for your application. We have the # BA12B for a 1-1/4" hitch, or the # BA22B for a 2" hitch. This rack is made for heavier e-bikes,...
view full answer... - Adapter to Convert 4-Pole Trailer Connector on 2002 Acura MDX to 5-Pole for Boat Trailer Actuator
- We offer a handy plug-in wiring adapter # 20036 that will allow you to easily convert your MDX 4-pole wiring to a 5-pole format to match your boat trailer. The kit includes a quick-splice connector to allow you to connect the 5th wire (the single blue one) to the car's reverse light circuit. This will capture the reverse light signal required to activate your trailer coupler's reverse lockout.
A circuit tester like # PTW2993 makes it easier to find the correct wire at the car's taillight...
view full answer... - Extensions for Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps Installed on 30" Hitch Height
- Since your vehicle has a hitch height of 30" you will need the extensions for the Mad-Ramps Pivoting Ramp System for ATV/UTV Ramps # MR54FR, which is found on our site as the following:
- Mad-Ramps 30" Extensions for Mad-Ramps ATV/UTV Ramp System # MR66DR
view full answer...
Go To Results