The issue you can run into when you increase tire size on your trailer is clearance. You want to have about 4 inches in between the tire tread and underside of the wheel well and at least an inch or so between the tire's sidewall and any parts of the trailer. As long as you have the clearance you'll be fine.
Your current tire size of 175/80-13 has an outer diameter of about 24 inches and is about 7 inches wide.
The 185/80-13 size tires, like # AM3S331, are about 24-1/2 inches in diameter... view full answer...
In order to attach Thule crossbars to the naked roof of your 2019 Subaru Legacy you will need Feet # TH710501 and Fit Kit # TH145193. The available Thule crossbars for your vehicle are as follows: Thule SquareBar Evo Crossbars - Steel - 53" Long # TH712400, Thule WingBar Evo Crossbars - Aluminum - Silver - 53" Long # TH711400, and Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long # TH711420. I went ahead and attached a demonstration video for you to check out. view full answer...
The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e99YR is only sold by etrailer.com. No other site sells it. It is confirmed to fit your 2015 Subaru Legacy.
The hitch has an easy bolt-on installation with no welding required, the hitch has a matte black powder coat finish over the protective base coat that offers superior rust resistance.
I attached instruction link below. They will be a little different but close to the Outback. view full answer...
Yes! For your 2007 Subaru Legacy Wagon, you need the Inno Feet for Square Crossbars # INTR and the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # INTR104. These are both confirmed to fit with your Inno squre crossbars on your 2007 Subaru Legacy Wagon. view full answer...
If your 1999 Subaru Legacy Outback Wagon came with the factory tow package then you will need the Tekonsha T-One # 118461 which simply plugs into the plug that you found at the rear of your Outback Wagon. I have attached a sample installation video you can reference.
If you will be using this for towing but you do not have a trailer hitch yet then I recommend going with the Curt Trailer Hitch Receiver # C12270. This is a Class II receiver with a 1-1/4 inch hitch receiver opening rated... view full answer...
The tow bar mounts, or base plates, that you currently have for your 2002 Subaru Forester will not fit on your 1998 Subaru Legacy, but we do have a kit that will work.
Your current base plates are the Roadmaster XL Base Plates, # 909-9. For your 1998 Subaru Legacy, you can use the Roadmaster XL Base Plates, # 909-3, if you have the L, 2.5 GT or the 2.5 GT Limited. If you have the Outback Edition, you want the Blue Ox Base Plate Kit, # BX3604.
The Roadmaster base plate kit is compatible... view full answer...
As long as the cross bars on your factory rack are not wider than 2-3/4 inches and are not more than 1 inch thick, the rack should bolt on fine.
The adapter you were looking at is for a certain type of Thule adjustable cross bars. view full answer...
We can help you with both a wiring harness and hitch installation hardware for your 1996 Subaru Legacy.
If your Legacy is the Outback Wagon you can use TowReady wiring harness # 118461 which is a custom-fit harness that simply plugs in to your tail lights. If you do not have the Outback wagon then instead you will use universal-fit harness kit # C59496.
The trailer hitch you referenced, Curt # C12270, is a 1-1/4-inch Class II type and we do offer a complete installation hardware kit... view full answer...
What you need is the Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers # Xadapt2. This adapter will allow you to mount your Thule 599xtr Big Mouth bike rack on your 2022 Subaru Legacy Aero crossbars. view full answer...
Go To Results