In the installation instructions of the Thule OutWay Platform 2 Bike Rack, # TH65JV, the upper support strap will connect in the gap at the front edge at the top of the hatch door. The clip should not have any contact with the glass in your hatch back door.
The strap may contact the glass, but the actual mounting point will be at a body joint on your vehicle.
However, Thule does state that when the carrier is mounted to your Honda you will not be able to use the rear wiper blade. view full answer...
On brake assembly # 23-468, and most electric brake assemblies, it does not matter which wire is used for ground and which is used for power. So they are not polarity sensitive and you can use either wire for either function. I have linked a few videos on this brake assembly for you. The matching right hand side assembly is # 23-469. view full answer...
You are correct that the Thule Passage 2 Trunk-mount carrier # TH910XT is a confirmed fit for your 2010 Honda Insight. I verified this with Thule.
This rack will install on your Insight as follows: set the Fit-Dial knob to number 8; place top clips in the gap at the front edge of the top of the trunk; place lower clips in the bottom edge of trunk; the side straps can be positioned on the side edges of the trunk.
My contact at Thule confirmed that their testing of this rack on your Insight... view full answer...
Go To Results