Looks like you are in need of a number 42 spindle like the part # TRU37FR. The numbers you listed aren't part numbers but judging by the shape of what you sent in a picture of this is a match. You still might verify this though by measuring where the bearings ride. If those dimensions are 1.25 and 1.74 inch then this is the correct. view full answer...
Depending on which wheel The Wheel Club - Tire and Wheel Lock, part # W1490, is mounted to will determine if a car can be towed. If the vehicle's non-drive wheels or wheels that are not powered by transmission are locked then this would prevent the vehicle from being towed. For example on a front wheel drive car, like your Mitsubishi Galant, if you were to put the wheel lock on the rear wheels, this would prevent the car from being towed by a traditional tow truck that tows the vehicle... view full answer...
The Glacier Tire Chains, part # PW1034, are SAE Class S rated snow tire chains. These are designed to fit 13 inch to 18 inch tires, and are designed for vehicles with limited wheel well clearance. I have linked you to an installation video for these snow chains.
You will want to check with the dealership to make certain your Galant is able to have snow chains installed. If they recommend that chains are not to be used on your vehicle, I cannot safely recommend using them. view full answer...
To install the Curt Trailer Hitch # 11248, on your 2001 Mitsubishi Galant, you will need to drill 2 holes through the trunk pan. I have included a link to the installation instructions for you to view.
The hitch comes with a ball mount, pin and clip. For a ball, use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you can use # 119178KIT. I have included a link to a video that shows a typical installation. view full answer...
The Curt trailer hitch that fits your 2001 Mitsubishi Galant, # C11248, is meant to be used with ball mount # C45521 which can be used in the rise position (with the ball platform higher than the receiver opening). In this position it provides a 2-5/8 inch rise measured from the top of the receiver opening to the top of the ball platform.
With Class I hitches like this you are supposed to use the ball mount specified by the hitch manufacturer or it can void the hitch warranty.
For 1-7/8... view full answer...
Yes, the Thule OutWay 3 Bike Carrier, # TH56BV, will work great on your 2002 Mitsubishi Galant ES. I recently had the chance to install this rack on a vehicle and it is the easiest to install and remove trunk mount rack that I have used. For this reason, this is the rack I personally would choose for a trunk mount rack.
You may also want to consider a bike adapter bar, # TH982XT, for use with bikes that do not have a horizontal cross bar for carrying the bikes level, see video. view full answer...
At this time the only trailer hitch available for your 2002 Mitsubishi Galant is the Curt Class I Trailer Hitch, # C11248. As you mentioned, class I trailer hitches only come with a 1-1/4 inch receiver. The best option for you would be to look into a class I compatible bike rack.
There are trailer hitch adapters available that will allow you to use a 2 inch hitch mounted accessory with a 1-1/4 inch hitch, like part # HTAD, but they also reduce the tongue weight capacity of the hitch by... view full answer...
The Upgraded Circuit Protected Modulite with 4 Pole Harness and Hardwire Kit, # C59496, fits many different vehicles so there are only universal installation instructions since the product is not vehicle specific. view full answer...
You will need the Curt Weld-On 2" Receiver # E17 to have a custom receiver built for your 2004 Mitsubishi Galant ES 2.4L. There is currently not an aftermarket receiver being produced for your Galant.
The Vehicle Wiring Harness Kit # C59496 will allow you to wire in a 4-way flat connector. This will be needed for most small trailers you may tow and can also be used with Auxiliary Lights # C53201. The auxiliary lights are needed if your hitch mounted accessory impairs the view of your... view full answer...
The Thuule Passage 3 # TH911XT is a trunk mounted 3-bike rack that is designed to fit your 2000 Mitsubishi Galant. It has cushioned anti-sway cradles and is designed to work with most spoilers.
The Saris Guardian 3 # SAR43FR is not a fit for your vehicle.
If you plan on transporting any alternative frames bikes, like many women's bikes are, then you will need to use an adapter bar like # UB01 for them to mount properly.
I have linked both products to this page for your purchasing convenienc... view full answer...
For your tire size of 195/65/15 I would recommend a snow chain designed for off and on road applications like the Thule Standard Chain part # TH01221080. This chain has a diamond pattern and D-shaped links that will give you excellent traction.
These will also install pretty easily. I attached a review video for you to check out as well.
You will need to check the owners manual of your vehicle to determine if there are any restrictions on snow chain usage as well. view full answer...
While we don't have an install video for the Curt hitch part # C11248 on a 2000 Mitsubishi Galant I did attach a set of install instructions to this page for you to check out. Basically you will this attaches to holes that are already present on the rear vehicle frame and also a couple holes get drilled through the floor board to secure hardware there as well. view full answer...
Go To Results