If you are looking for a trailer hitch to mount on your RV then the highest rated capacity is the Curt Trailer Hitches parts # C13702 and # C13701 which are both rated for a max of 6,000 lbs towing when a weight distribution (WD) system is used. These are the same hitch with the only difference being the 13701 has a 2" drop for the receiver.
We do have the Ultra Frame Service Body Trailer Hitch Cross Tube # 41991 which has a 16,000 lb towing rating but I'm not sure if it would fit your... view full answer...
You have one roof rack option for your 2005 Pontiac GTO, an Inno kit consisting of:
Square Crossbars, 50 inches, Black, part # INB127
Inno Feet for Square Boxes, part # INSUT
Short Roof Adapter Kit, part # INJK
Fit Kit for INno Racks, part # INK548
This rack will provide you with a solid base with stabilization for the smaller than average roof of the 2005 Pontiac GTO so you can use the regular range of accessories. view full answer...
I'd use 1/4 inch diameter lag bolts whose length is a bit more than the thickness of the floor. How many bolts you need would depend on what you're using the E-track for. I'd probably want a bolt fastening the track about every 12 inches or so, maybe closer together for a heavier load. Use a self tapper like # FA1131822 to attach to the steel floor supports if present. view full answer...
The Air Lift Vehicle Suspension Kit for the 1967 Pontiac GTO, part # AL60844, is a correct fit for the 1967 GTO (as long as it is not the wagon model). Air bag kits like this are designed primarily to provide support to a suspension that is in good working order when it is handling a heavy load. They are not designed to provide suspension lift or increase weight capacity so your ride height will remain unchanged. But if faced with a heavy load in the rear they will help prevent some of... view full answer...
The low profile sandwich adapter, item # D25771, is 1 inch thick. If you know the thread pattern on your engine oil filter the 13/16-16 threads may work but a universal kit is what we normally recommend, so you have the correct adapter for your application. This kit is the Low-Profile Sandwich Adapter - Multiple Engine Filter Threads, item # D25783.
I would not recommend using a shorter oil filter with less capacity than the OEM oil filter.
It sounds like you want to install an oil cooler... view full answer...
Yes, the Derale Oil Filter Relocation Kit # D15748 will fit your 1965 Pontiac GTO with the 389ci engine. Your oil filter uses a 13/16"-16 thread diameter. We also have the Derale Oil Filter Relocation Kit # D15716 specifically for the 13/16"-16 threads. You can also use the Derale Dual Mount Oil Filter Relocation Kit # D15749 if you wish to use 2 filters.
The PTC Custom Fit Engine Oil Filter # 351P1A is the new filter size you will need to use with any of the 3 relocation kits. view full answer...