It sure is! The blue relay is included in the Curt Relay Kit # C57000 and it is indeed the same relay that activates the tow package circuits on a 2017 Frontier. As you mentioned, the jumper harness is located behind the passenger kick panel. view full answer...
The MaxxAir Replacement RV Air Conditioner Cover - Coleman-Mach / RVP Brand RV Air Conditioners - White # MA8335A5261 is the replacement I recommend for you and it has a simple installation. It will fit your Coleman AC unit. view full answer...
Yes, the adapter clamps that are used to secure the Extang Trifecta 2.0 Tonneau Cover # EX92985 to the Utili Track on your 2018 Nissan Frontier can be found with part # EX2244-0204. This includes all 4 clamps needed for installation.
If you can tell me what model tonneau cover you have I will be happy to verify if these will work. view full answer...
For the TracRac G2 Ladder Rack on your Nissan Frontier we have the Replacement Upright # TA7521902002. The upright itself measures 22-3/4 inches tall so I do recommend verifying that this matches your existing upright in case you have a slightly older model. If you also need the Tie-Down Cleat you can use part # TA01-27046. view full answer...
The best way to determine which tarp fits on which model bed is by finding the model cover you have on your truck and then checking the "Related Parts" tab; usually the replacement tarps will be listed in that section. The Replacement Tarp # EX1915 you were looking at is designed to fit on the Extang BlackMax model 2915 for a Toyota Tacoma with a 6 foot bed and based off the information provided it looks like you're looking for a replacement tarp on a 2010 Nissan Frontier.
I've listed... view full answer...
I have a solution for you, but we do not have the individual hardware kits for each hitch built out within the site- there are just too many to list. In order to get the correct Replacement Hardware Kit # RHK , you'll simply go to the linked page for the RHK and select the manufacturer of the hitch, in this case it is a Curt. After that, you'll put in the part number of the Curt Hitch # 13241 where it says "Hitch Item Number". After you've done that, you'll just add the item to your cart... view full answer...
We do have Curt hitches that fit your 2004 Nissan Frontier but the 13900 is not one of them. Instead you'd want the # 13841 for if you have a short bed or the # 13842 for if you have a long bed. I confirmed with Curt these fit your truck and do not require any drilling. view full answer...
The key for selecting a replacement grease seal is the reference number, in this case # 10-9. The manufacturer code does not matter. This is a single-lip seal with an inner diameter of 1.500-inches and an outer diameter of 1.987-inches. It is compatible as a replacement for the following other manufacturers' parts:
Dexter 010-009-00
Transcom 15191VB
National 474276
NOK AR2266FO
Chicago Rawhide 14840
If you prefer a double-lip seal in this same size use # RG06-020 which is sold as a pair. view full answer...
I contacted the manufacturer about if there are clamps to attach the TruXedo TruXport directly to the utilitrack on your 2019 Nissan Frontier. They informed me that there are not clamps to connect the cover directly to the utilitrack on the Frontier because the track will sit below the clamps.
They said that the correct clamps for the TruXedo TruXport that fits your 2019 Nissan Frontier are the Replacement Mounting Clamps for TruXedo Tonneau Covers # TX1703561. view full answer...
The part # 118267 wiring harness is designed to replace a damaged or broken 7-way wiring harness part # 118266.
This harness does not include the relays that are needed to activate the tow package on your Frontier. If this is not being used as a replacement, you will need part # 118266 harness that includes the relays. view full answer...
For your wheel bearing, races, and seals, I don't have the dimensions available. For a precise fit, I'll need you to give me the inner diameter and the outer diameter measurements of your bearing.
Most 4 lug hubs use the same bearings so it is a good possibility that the TruRyde Bearing Kit with Grease Cap for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal # DL21792 may fit. I've attached a video of this kit for you. view full answer...
The Camco Water Heater Element part # CAM02143 and Camco RV Water Heater Anode Rod part # CAM11563 will both work on a Suburban SW6DE Water Heater. view full answer...
For your 2019 Nissan Frontier SL I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75282 as it has the highest tongue weight rating of 750lbs, and a trailer weight rating of 5000lbs. If you use a weight distribution hitch those ratings get bumped up to 800lbs tongue weight and 8000lbs trailer weight.
From what I was able to find on your Frontier, the towing capacity range is 3500-6500lbs, so I recommend contacting your local Nissan dealership with... view full answer...
According to my Wesbar representative, the 7292 light is no longer available, although I did find some with red lenses online by doing a Google search. I looked though our selection of amber clearance/marker lights, and was unable to find anything with a matching bolt hole pattern. Unless you can find one online, you'll probably find your best bet will be to replace the lamps. I've linked to our selection of amber marker/clearance lamps. I'd recommend going with LED lamps if possible. They'll... view full answer...
The correct replacement tarp for the Extang BlackMax Soft Tonneau Cover part # EX2995 you have on your 2007 Nissan Frontier with the 6' bed is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover part # EX1995. view full answer...
It sounds like you might be looking for an Access Lorado Soft, Roll-Up Tonneau Cover # 834532006380 for a 2007 Nissan Frontier with a 5 foot long bed. If you just need the replacement tarp, let me know the serial number off your rails and I can get your the correct replacement tarp to fit. view full answer...
The Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX577601-CVR is not a fit for you 2011 Nissan Frontier. If you have the Lo Pro on your truck then the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover - Black # TX5923-CVR is the correct fit for your 5 foot bed. It will come with the pieces that latch into place. view full answer...
Unfortunately, I don't have any reference material that would show me what grease seal your Coleman Bayside pop-up camper uses.
From my research, it appears your camper uses a 3500 lb axle. If you can provide me more information, I can determine which grease seal you'll need. I'll need to know:
Inner bearing reference number stamped on bearing cage
Diameter of inner hub bore
Diameter of spindle journal surface where grease seal rides
The measurements need to be highly accurate, you'll... view full answer...
The Extang Tuff Tonno soft tonneau cover that fits your 2008 Nissan Frontier with 6-foot bed is cover # EX14995 and the replacement tarp part is # EX13995. You'll notice that the whole cover and tarp parts share a few common digits.
The leading digit "8" is left off the Extang part number here at etrailer when we add the Extang brand prefix "EX". This is the right part and Extang informed you correctly. view full answer...
We do sell replacement hardware for trailer hitches with the part number # RHK. On the product page you'll need to enter the part number of the hitch you have and then also select the manufacturer and we'll ship you out everything you'd need. The cost for this part number is available at the attached link as well. view full answer...