Expert Answers about Freightliner FLD-Series

• 1999 Freightliner FLD120 Brake Controller Recommendation for Trailer with Brakes
• The Prodigy P3 part # 90195 would work great for your application as it can basically be wired to any vehicle that uses 12 volt power. Or for a controller that is designed specifically for your application we have the Hayes brake controller part # HA100400C which ties into the air system of your tractor and gives you a proportional brake signal for a trailer with electric brakes. The connector you have in your hand is a standard RV style 7-way which is very common on trailers with electric...
  view full answer...


• What is the Capacity of the Curt Pintle Hook C48231
• As long as the total weight of the trailer and it's cargo are no more than 60,000-lbs then you can use the Curt Pintle Hook, Bolt-On, 60K # C48231 to connect the truck to the trailer. It sounds like you've got a 40,000-lbs capacity trailer, so this should work just fine. I've linked a short review video of this pintle hitch for you to have a look at, as well.
  view full answer...


• Mounting Hole Size and Spacing of Polar Fixed Grab Handle PLR6624-A
• The fixed grab handles we carry like parts # PLR6618-SSP and # PLR6624-A are general purpose replacements; they are not an exact OEM replacement part for any given brand or model of trailer. The stainless steel handle item # PLR6624-SSP and the similar aluminum model # PLR6624-A both have a handle area that measures approximately 24-inches but the 3/8-inch mounting holes are spaced apart 32-inches on center. The item # PLR6618-SSP is an 18-inch handle whose mounting holes are spaced apart...
  view full answer...


• Replacement Tack Room Door Latch For A Featherlight Trailer
• We may have some potential options for replacing the tack room door lock on your Featherlight trailer. Is the 5" L x 5" H dimension you gave for the door cutout or the lock itself? The best way to find the right replacement lock is to go by the cutout size. If your cutout is 5" x 5" we do not have a lock that will fit those exact dimensions. The closest thing we have is the Bauer Products Motorhome Door Lock # BA64FR which will fit a 5-1/4" wide x 4-1/2" tall cutout. Is it made for a...
  view full answer...


• Need a Roof Vent Cover For Fan-Tastic Fan
• I suggest the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25", # FVU1500WH. This is designed to fit all Fan-Tastic Vent trailer roof vents. It is common for the vent lid to make some contact with covers however, the # FVU1500WH, will open most of the way and allow 100% of air flow produced by the fan. There is the option of the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4", # MA00-955001 which is a little taller.
  view full answer...


• Recommended Trailer Hitch for my 2002 Winnebago Journey
• I have something close but there are not Class 4 hitches available for your coach that I can find. Instead I recommend instead using the Curt Adjustable Width Trailer Hitch Receiver for RVs part # 13703. While it is not a Class 4 hitch it does allow you to use your coach to haul some loads.
  view full answer...


• Base Plate Size And Capacity Differences On The Ram Gooseneck To 5th Wheel Coupler Adapter
• I contacted the manufacturer on your behalf regarding your question. Per Ram, the plate is the same 10"x10" size on the # KPG5-R25-IP and the # KPG5-R30IP. Our review video also had it measured the same. The capacity difference increase for the 30k comes by way of the welded belly band around the bottom of the outer tube. The 30k capacity also comes from the .275" inner tube wall thickness vs the .24" inner tube wall thickness on the 25K. Included are video resources for more information...
  view full answer...