We do have a trailer hitch that fits the 1995 Mitsubishi Diamante Wagon but C11008 is not a fit. Instead I recommend # C11728 which is designed for the wagon models.
This is a Class I trailer hitch rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Be sure to consult the vehicle owner's manual for the vehicle's towing capacity. Whichever is lower, the hitch or the vehicle, is the capacity you will need to go by.
For a ball mount I recommend # C45521. If the trailer... view full answer...
Yes, there will be drilling to install this CURT Trailer Hitch Receiver with Drawbar # C11244. You will need to drill three holes into the rear panel of your 2001 Mitsubishi Diamente. I attached installation instructions for you to check out that detail this process.
If you plan on doing some towing you may be interested in the following products to complete your setup:
Upgraded Circuit Protected Taillight Converter # 119178KIT (installation video attached)
Hitch Ball 1-7/8 inch # A-82
Hitch... view full answer...
The DaLan Class I Trailer Hitch Receiver with Drawbar, # 247360, has a tongue weight capacity of 200 pounds and a gross trailer weight of 2,000 pounds. It will be able to easily handle a trailer weight only 350 pounds (35 pounds of tongue weight). I have included a link to the installation instructions below.
Since you will be towing a trailer, you will also need to get Upgraded Circuit Protected Taillight Converter Hardwire Kit with 4 Pole End (Includes Testers), # 119178KIT, for trailer... view full answer...
Go To Results