Trailer Hitch and Wiring for a 1995 Mitsubishi Diamante Wagon
Question:
WILL THIS WORK ON THE 1995 MITSUBISHI DIAMANTE WAGON? LOOKING TO PULL A LIGHTWEIGHT ALUM. CANOE TRAILER BY TRALEX IF NOT, CAN YOU MAKE ME ONE THAT WILL?? MANY THANKS
asked by: Kelly L
Expert Reply:
We do have a trailer hitch that fits the 1995 Mitsubishi Diamante Wagon but C11008 is not a fit. Instead I recommend # C11728 which is designed for the wagon models.
This is a Class I trailer hitch rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Be sure to consult the vehicle owner's manual for the vehicle's towing capacity. Whichever is lower, the hitch or the vehicle, is the capacity you will need to go by.
For a ball mount I recommend # C45521. If the trailer requires a 1-7/8 inch ball I recommend # A-80. And if it requires a 2 inch ball I recommend # A-82. And to add a 4-Way flat trailer connector at the back of the vehicle for the trailer lights I recommend # 46255.
Products Referenced in This Question
Hopkins Active Tail Light Converter with Install Kit
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug and Lead
- 4 Flat
- Hopkins
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- No Cross Tube
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- No Cross Tube
- CURT
more information >