If all you are looking for is a 7-way and a 4-way that are integrated together and would install on your 2008 Dodge Ram by simply replacing your current factory 7-way all you would need is the part # 42145. This would allow your travel trailer to plug into the 7-way when needed and then your light bar to plug into the 4-way. This installs with 4 screws around the perimeter of the housing like you said you were interested in.
Now if you are trying to leave the 4-way free so that you can... view full answer...
Yes, the Thule Kayak Carrier part # TH830 is a confirmed fit for square bars like the Sportrack roof rack part # SR1002.
This rack is a semi custom rack that is confirmed as a fit for your 2009 Dodge Charger, but if you wanted a rack that's custom fit for your vehicle and will fit better the Rhino Rack part numbers # RRVA126B-2, # RRRLKVA and # DK077 would be your best option. view full answer...
Yes, I checked with Saris and the Bones bike rack part # SA801BL has been confirmed as a fit for your 2008 Dodge Charger RT.
The arced arms of the rack will fit over the spoiler of your vehicle.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a... view full answer...
The exhaust of your 2016 Dodge Charger has to be lowered to install the Curt hitch part # C13093. This is a pretty standard install step for hitch installs as there isn't a way to get a hitch past the exhaust. If you check out the install video though you can see that it's not really that difficult to pull off.
All of the hitches for this vehicle require this step. view full answer...
I checked with Thule and the Thule Gateway Pro # TH45JV that you referenced has been confirmed as a fit for you 2010 Dodge Charger SXT that has a factory spoiler so it would work well for you.
I attached a review video for this rack for you to check out as well.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike Adapter # 64005 to provide a horizontal... view full answer...
The Hollywood Racks Over-The-Top, # HRF2 would work great on your Charger. It has a long reach as well as arms/legs that can move independently of each other for the best fit. This is the carrier recommended by Hollywood Racks for vehicles that have spoilers, including your Charger.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical men's bike would) then I recommend using bike adapter bar # 64005. This will allow you to carry... view full answer...
For your 2011 Dodge Charger we have the Draw Tite trailer hitch part # 76145 which is a confirmed fit and has plenty of tongue weight capacity for a carrier with a Pride 1450 as this hitch has a tongue weight of 675 lbs.
You'd have to verify in the owners manual of your vehicle if it also has enough tongue weight capacity. view full answer...
For the roof rack, I'd recommend the Rhino-Rack Vortex Aero Roof Rack. The rack is reasonably priced, looks great and is very strong with a 165lb capacity (which could be limited by the actual capacity of your roof, see dealer or owner's manual for more information). The rack would consist of the following parts:
Vortex Aero 49 Inch Crossbars, part # RRVA126B-2
Roof Rack Legs, part # RRRLKVA
Vehicle Specific Clamp Kit, part # DK298
To carry your stand up paddleboard, there are several... view full answer...
We have both Class II and III trailer hitches available for your 2011 Dodge Charger R/T. If you are going to use Class III hitch # C13093 then I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. If you also need a 2-5/16 inch use # 63847. For trailer wiring use # 118560.
If you are using a Class II trailer hitch, like Curt Class II hitch # C12064 or Draw-Tite hitch # 36548, you can use ball mount # C45520.
For... view full answer...
For your 2013 Dodge Charger with a spoiler the Hollywood Racks Expedition part # HRF6-2 is a great option. This trunk rack is confirmed as a fit for your vehicle and is specifically designed for vehicles with spoilers like yours so it will fit over and clear the spoiler well.
We had the chance to install this rack on a 2012 Charger similar to yours and we found it fit and worked well. See the link I attached to see the test fit.
If you plan on carrying any womens or alternative framed... view full answer...
The Redarc Tow-Pro Elite Trailer Brake Controller - 1 to 3 Axles - Proportional # RED44FR has some features that other brake controllers do not that make it easy to recommend despite the cost difference.
The Tow-Pro Elite has a dash mount that doesn't have the typical knee knocker installation. It actually installs in your dash or console in one of the preexisting button locations or can be added so it looks like a factory part of your vehicle. This also is a really nice feature for... view full answer...
The trailer hitch I recommend for your 2016 Dodge Charger is the Draw-Tite Trailer Hitch Receiver, Class II # 36548. This trailer hitch has a 1-1/4 inch receiver that will work well with your Thule Vertex.
The # 36548 hitch has been confirmed to fit all models of the 2016 Charger so it will work well for your Charger R/T Scat Pack. The maximum tongue weight capacity of this hitch is 300 pounds, so your 100 pound bike rack plus bikes will fall well within the hitch's capacity.
I really... view full answer...
I have everything you will need, but the Draw Tite hitch # 24815 that you referenced is not a confirmed fit for your 2007 Dodge Charger so I would not recommend it for you. It's for a Scion.
You would want the Curt Hitch part # 13465. I attached an install video for you to check out as well.
For trailer wiring you would want the Curt Wiring harness part # C55534.
For ball mounts I recommend the etrailer Ball Mount Kit # EBMK4 . It comes with 2 ball mounts, 2 balls, a hitch pin with clip,... view full answer...
Yes, we have trailer hitches that fit your 2016 Dodge Charger SXT. The Draw Tite hitch part # 76145 would be a great option confirmed as a fit. For trailer wiring you'd then want the part # 118655 which is a confirmed custom fit.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball,... view full answer...
The # C49480 isn't a hitch extender. It's actually just a 48 inch long hitch tube for fabrication purposes.
If you had a 2-1/2 inch hitch the Reese extender part # RP45292 is 34 inches long and might work well for you. view full answer...
The # ETBC7L was not supposed to include a circuit tester either as a separate item or as a tester built into the 7-way. If you installed this kit and ran the 12 volt power wire up to the battery a wireless style of controller like the Curt Echo # C51180 would fit and work great once synced to your phone. view full answer...
Your 2019 Dodge Charger with a 6.4 liter V8 and your 2020 Ram 1500 with a 5.7 liter has oil filter threads of 22 mm x 1.5 mm which is one of the threaded filter sizes included with the # D15604 so it would work on both vehicles. view full answer...
For a trunk mount bike rack that will easily clear the spoiler on your 2013 Dodge Charger you can use the Hollywood Racks Over-the-Top rack # HRF2-3. This rack has an additional upper arm piece that moves the top straps up and over that spoiler so no weight is put on it (since the spoiler is not meant to support weight). I have included a link to a video that shows how it works.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical... view full answer...
Since you already are familiar with the Yakima products, I recommend staying with that manufacturer but the Q clips from your current roof rack have been discontinued and they have updated to a newer system.
For your 2011 Dodge Charger, I recommend the:
JetStream aero crossbars # Y00425
BaseLine towers # Y28TR
BaseClips # Y06137
BaseClips # Y06126
This roof rack will work with your old roof box, but you may need to adjust the mount positions. view full answer...
Go To Results