bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Chevrolet Cavalier


  • Is Drilling or Modification Needed to Install Draw-Tite Trailer Hitch # C11109, 2000 Chevy Cavalier
  • To install the Curt Trailer Hitch, # C11109, to your 2000 Chevy Cavalier, you will need to temporarily lower the exhaust to get the hitch into position but then put it back after the hitch is installed. The only drilling that may be required is to enlarge some existing holes needed for installation. It will also require you to trim the heat shield. I have included a link to the installation details for reference. If you plan on doing some towing, the recommended ball mount is # C45519...
    view full answer...

  • Installating a 4 Pole Trailer Wiring Harness on a 1999 Chevy Cavalier
  • Although there isn't a plug and play wiring harness available for your Cavalier, we do offer a 4-pole wiring harness, part # 18002 which is tapped into the existing taillight circuits. It is a pretty easy process; the wires tap into the existing wiring harnesses behind your vehicle taillights. Luckily, the wire color code for the 18002 and the existing taillight wire colors should be the same. Green would tap into green, yellow into yellow, brown into brown, and the white would be grounded...
    view full answer...

  • Will I Have to Drill into the Frame of My 2003 Chevy Cavalier to Install Curt Hitch # C11109
  • In order to install this Curt Trailer Hitch # C11109 on your 2003 Chevy Cavalier, you will only need to use a drill to enlarge some existing holes. You will have to temporarily lower your exhaust, but the exhaust will be reinstalled when the installation is complete. You will also need to trim the heat shield. I attached the instructions in a link below for you to check out also. You may also be interested in purchasing the following: Sportframe Drawbar 2-1/8 inch Rise or 2-3/4 inch...
    view full answer...

  • Will the Vision X 9007 Headlight Bulbs and Relay Harness Effect Daytime Running Lights
  • The Vision X 9007 Halogen Headlight Bulbs with Relay Harness # VX-H9007-R will not effect your daytime running lights. This harness just bypasses the power draw from the headlight switch by pulling power directly from the car’s battery, which will increase the light out-put on your headlights.
    view full answer...

  • What Size Drill Bit is Needed to Install Class I Curt Hitch on a 2004 Chevy Cavalier
  • Curt recommends using a 7/16" drill bit to install the Class I Hitch Receiver # C11109 on your 2004 Chevy Cavalier. The hardware used to secure the hitch in those locations will be 7/16-14 bolts that are provided as part of the installation hardware with the hitch. Attached is an installation video of this hitch on a 2003 Cavalier for you to check out. If you let me know what you plan on using the hitch for I'd be more than happy to make any additional recommendations that may be necessary.
    view full answer...