You need the Replacement Hardware Kit for Trailer Hitches, part # RHK. When you order this item you will need to specify you have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C67ER. We need the model number and the hitch manufacturer.
I have included a product description link and a video demo link below. view full answer...
No, the warranty will not be affected whatsoever on your 2022 Kia Carnival by installing the Curt trailer hitch that fits, which is the following part number:
- Curt Trailer Hitch Receiver # C67ER
The reason why is because you are protected by what is called the Federal Magnuson-Moss Warranty Act. This act says if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless the part or install caused the problem. So for example, if... view full answer...
Yes, there is but it won't be custom fit. I checked with all of our vendors and no one makes anything for the 2023 Kia Carnival's without roof rails. It's because the sliding doors make it difficult to use roof rack systems that use door jamb clips, which is how roof racks install without rails.
The only option available is to use the SeaSucker Monkey Bars Roof Rack item # SEA99FR. These 60" round crossbars attach to your roof using vacuum cups. They have a 150 lbs capacity so they'll... view full answer...
There are only some minor differences between the two trailer hitch receivers for your 2022 Kia Carnival, which are the following part numbers:
- Draw-Tite Max-Frame Trailer Hitch Receiver # DT34GR
- Curt Trailer Hitch Receiver # C67ER
One of those minor differences is the install, in which the Curt has you trim and reinstall the trim panel that is underneath your Carnival, while you'll leave it off completely for the Draw-Tite. However, you do not have to reinstall the panel with the... view full answer...
The Ignik black travel case unfortunately isn't sold separately at this time so you would have to purchase both the tank and case with part # GN74FR. view full answer...
Yes, you can use the Yakima SkyRise HD Tent # Y07437 on your 2023 Kia Carnival once you've installed a roof rack. I recommend the JetStream system from Yakima which includes the following parts:
- 60" JetStream Crossbars # Y00426
- TimberLine Towers # Y33TR
- Lock Core Kit # Y07204 (optional)
I like this roof rack kit because of the adjustability so you can get the crossbars at the best angle for your roof. view full answer...
For your 2022 Kia Carnival, I recommend the Derale Series 9000 Plate-Fin Transmission Cooler item # D33602. This is a universal cooler that fits small SUV's and vans.
The 10-1/8" wide x 6-3/8" tall x 1-1/4" deep, radiator-style heat exchanger provides more surface area so that the fluids flowing through can spread out along the finned chambers to can cool your transmission faster.
I have linked a review video below. view full answer...
Every vehicle is different from how the towers of crossbar systems install into the factory raised rails of vehicles. It is important to note that the usable part of the crossbars is from end to end as opposed to just the measurements inside the feet. No matter how the towers attach to the rails on your 2022 Kia Carnival, the crossbars on the Malone SteelTop Roof Rack - Square Crossbars - Steel # MPG201 will still measure 50 inches from end to end. However, we do carry the Malone SteelTop... view full answer...
You can absolutely fold down the 3rd row seat of your 2022 Kia Carnival with the WeatherTech Cargo Liner # WT72PJ still installed, and there will no affect how quick and easy it is to fold up your 3rd row seats. view full answer...
For your 2024 Kia Carnival I recommend the etrailer Trailer Hitch Receiver # e36KR. This hitch has a bolt-on installation and a max tongue weight of 600 lbs to handle your bikes and bike rack. I would choose this hitch over other options since in my opinion it has the best appearance. All of them have a visible cross tube but this hitch has a matte black powder coat finish which gives it more of an OEM look. It also helps hide dirt and scratches when compared to a glossy finish.
I have... view full answer...
Yes, I recommend using our etrailer Trailer Hitch Receiver # e36KR on your 2024 Kia Carnival. This is custom fit for your Kia so no drilling is required. I prefer our receiver as the matte black finish I feel is more durable and looks better than the gloss black finish other manufacturers use.
The Curt Powered Tail Light Converter # C59236 will give you a 4-way flat connector. This connector is most commonly used on small trailers you might tow. It will also allow you to use Auxiliary... view full answer...
Out of the two hitches I recommend The etrailer Trailer Hitch Receiver # e36KR. Though both hitches are very similar I like the etrailer hitch over the Curt hitch because the etrailer hitch has a matte black powder coated finish which hides scratches and scuffs better then the Curt does because of the type of paint that is coated on the hitch. The Curt hitch has a gloss black powder coating that makes the scratches and scuffs more visible that you would getting from flying rocks and road... view full answer...
Yes, there is! To add a hitch to a 2024 Kia Carnival, I recommend the Curt Trailer Hitch item # C67ER. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like when installed.
Since you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534.
I also recommend... view full answer...
Yes, you're in luck. We do have a hitch that we know fits the 2024 Kia Carnival.
- Curt Trailer Hitch Receiver # C67ER
This hitch fits your Carnival, has a bolt-on, no-drill installation and provides you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing, you can round out a tow package by adding the Curt Powered Tail Light Converter with 4-Pole Flat Trailer... view full answer...
We have a roof rack system for raised rails on your 2024 Kia Carnival from Yakima:
- 60" JetStream Crossbars # Y00426
- TimberLine Towers # Y33TR
- Lock Core Kit # Y07204
If you're asking for raised rails to install on your Carnival we unfortunately don't have those, but you should be able to get them from a Kia dealer. view full answer...
Both the Curt # C67ER and etrailer # e36KR trailer hitches that fit your 2024 Kia Carnival will reduce your ground clearance since the crosstube will hang below your rear bumper. Since this is the case you'll want to enter and exit any steep driveways and such at an angle to give you the best clearance.
If you let me know what you plan on using the hitch for I'll be more than happy to make some additional recommendations for you! view full answer...
Yes, the arms of the Saris MHS Bike Rack # SAR23MR will fold all the way to the ground. I have included a video review linked below which you can see both arms down when unloading a bike at 7:45 into the video. view full answer...
I would be happy to help!
The correct vehicle wiring harness for your 2022 Kia Carnival is the Curt T-Connector Vehicle Wiring Harness # CU94FR. This will plug into the factory connector on your vehicle and not require any splicing.
This connector paired with the Curt Trailer Hitch Receiver # C67ER you were looking at will give you almost everything needed to tow a trailer with your Carnival.
The only other components you will need is a ball mount, hitch ball, and hitch pin and clip... view full answer...
The best hitch for your 2024 Kia Carnival is going to be the Curt Trailer Hitch item # C67ER. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight.
I have attached a couple of pictures below, along with an installation video, so you can see what this hitch looks like when installed.
If you are planning on towing you will also need a wiring harness item... view full answer...
Since your 2023 Kia Carnival EX has a naked roof I recommend going with the SeaSucker Monkey Bars roof rack:
- 48" Crossbars # 298-SX6000B
- 60" Crossbars # SEA99FR
This system uses powerful vacuum cups to secure to the roof of your vehicle and provides you with round crossbars to install various accessories to. I'm not exactly sure what you're wanting to install on your vehicle so just make sure it is compatible with round crossbars and doesn't have any restrictions on how the roof... view full answer...
Go To Results