Expert Answers about Toyota Camry
- Hitch Flex and Use of Support Straps When Hitch Bike Rack is Installed
- Trailer hitches have to be able to flex to avoid damage. The metals used in fabrication of a hitch like Draw-Tite # 36540 and Curt # C12107 are selected to allow for this. The mounting brackets on a hitch are not of the same metal formulation as the cross tube. A totally rigid hitch would be more likely to suffer damage. Some flex is okay.
Excess motion of a hitch-mounted accessory such as a bike rack is something else.
This is why Curt requires use of their stabilizing strap # 18050...
view full answer... - Recommended Hitch and Wiring Harness for a 2023 Toyota Camry
- The only hitch available for a 2023 Toyota Camry is the Curt Trailer Hitch item # C11576. This hitch is custom fit and bolts to your Camry with included hardware. The pricing will be on the right side of the product page.
This is a class II hitch with a 2,000 lbs towing capacity and a 200 lbs tongue weight. It looks like the towing capacity for your car goes up to 2,000 lbs depending on the model. You will want to verify what your model's actual capacity is and make sure your camper doesn't...
view full answer... - Recommended Roof Rack for Using a Hullavator on a 2023 Toyota Camry
- For the Thule Hullavator item # TH898 lift assist function to work you will need a longer crossbar that extends 4" - 8" past the legs of your roof rack. For your 2023 Toyota Camry with a naked roof, I recommend the roof rack by Thule and it includes the following parts:
Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2 item # TH711520
Evo Clamp Feet for Thule Crossbars - Naked Roofs - Qty 4 item # TH710501
Fit Kit for Thule Evo Clamp and Edge Clamp Roof Rack Feet - 5082...
view full answer... - Hitch for 2019 Toyota Camry to Tow Motorcycle Trailer with 565-lb Harley Davidson
- I'll start off by mentioning that from my research, it looks like the weight of the Stinger Folding motorcycle trailer you're looking at weighs in at around 220-lbs. When you add the 565-lb Harley to the trailer, you're looking at a total weight of a little less than 800-lbs.
You'll want to consult your owner's manual for confirmation on the towing capacity of your 2019 Toyota Camry, but using the Curt # C11576 should allow you to tow that setup without any issues (I'm showing the towing...
view full answer... - Recommended Hitch for a 2023 Toyota Camry
- To add a hitch to your 2023 Toyota Camry, I recommend the Curt Trailer Hitch item # C11576. This hitch is custom fit and bolts to your Camry with included hardware. This hitch is confirmed to fit all models of the 2023 Camry including the hybrid. This is a class I hitch with a 1-1/4" receiver. There are no class III hitches available.
I really like the Curt Hitch because the crosstube mounts behind your rear bumper. This not only helps with ground clearance because all you will be able...
view full answer... - How Far Apart Should the Bolt Holes to Mount a Hitch on a 2013 Toyota Camry Be
- Your best bet is going to be to confirm the part number on the spec sticker of the hitch; the Draw-Tite # 36540 and Curt # C12107 are the confirmed hitches we offer for your 2013 Toyota Camry. The distance between the bolt holes on these hitches are all different depending on their positions but they are:
38" apart center on center for holes closest to engine
38-1/4" apart center on center for holes closest to bumper
37-1/4" apart center on center for the middle holes
I've also linked...
view full answer... - Can the 2017 Toyota Camry Hybrid Tow a Trailer
- I checked the owner's manual online for the 2017 Toyota Camry hybrid and all it says is that towing a trailer is not recommended. It doesn't say you can't but it also does not provide a towing capacity for the vehicle. So it is up to you on whether or not you want to go ahead and tow the trailer. I can definitely tell you the hitch, wiring and accessories you will need.
For a trailer hitch you can use # 36540. In addition to the hitch you will need a ball mount, # 36071. If the trailer...
view full answer... - What Is The Maximum Weight Limit For A Rhino-Rack Roof Rack On A 2014 Toyota Camry
- The maximum weight your passenger vehicle can have on its roof is 165 lbs according to the National Transportation Safety Bureau. The larger roof rack companies, Yakima, Thule, Rhino-Rack, have robust testing capabilities. The roof rack for your 2014 Toyota Camry. These weight limits are based on their own in-house testing. Your roof rack consists of the following items:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" Long - Qty 2, part # RRVA118B-2
Rhino-Rack 2500 Series Legs...
view full answer... - Recommended Hitch for a 2024 Toyota Camry
- There is one hitch available for the 2024 Toyota Camry XSE that is really well hidden. It is the Curt item # C11576. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 200 lbs tongue weight capacity. There are no 2" hitches available for Toyota Camrys and there haven't been for many years.
The crossbar on the Curt item # C11576 mounts behind the rear bumper cover which completely conceals it. This not only...
view full answer... - Can a 2 Inch Trailer Hitch Mount Accessory be Used on a 1-1/4 Inch Hitch on a 2011 Toyota Camry
- It is possible to use your 2 inch accessories in a class II, 1-1/4 inch trailer hitch. You would have to use a hitch expander, 1-1/4 to 2 inch. However, the use of an expander will reduce the tongue weight capacity of the trailer hitch by 50 percent.
It appears that the vast majority of trailer hitches for a 2011 Toyota Camry have a tongue weight capacity of 300 pounds. When using an expander, like # 80303, that capacity will be cut down to 150 pounds. This means that the weight of any...
view full answer... - Speed Rating for Kenda 13 Inch Tire and Wheel Combo # AM3S060
- The tire in trailer tire and wheel combo # AM3S060 is rated for 81 miles per hour. This tire is a Load Range B tire rated for 1,100 pounds at 35 psi.
view full answer... - Width of the Hook on the UWS Replacement Twist Latch # UWSTWISTLOCK
- I went out into our warehouse and measure the width of the hook on the UWS Replacement Twist Latch # UWSTWISTLOCK and found it to be 11/16 inches wide.
view full answer... - Does the 4-Way Wiring Harness for a 2006 Camry Work w/ LED Trailer Lights?
- Yes, it will. The Curt T-Connector Vehicle Wiring Harness item # C55308 will work with a trailer that has LED lights. This harness is confirmed to fit a 2006 Toyota Camry. It will provide you with a 4-way connector.
I have linked an installation video below.
view full answer... - How Much Weight Will the Curt Roof Mount Cargo Basket Support
- The weight capacity of the Curt Roof Cargo Carrier, # C18115, is 150 pounds. But if the roof or roof rack is rated lower it is limited to the lower capacity. You will need to consult the vehicle owners manual for your 2009 Toyota Camry Hybrid for the roof and rack capacities.
I have included a link to the installation instructions for you to view.
view full answer... - Curt Class I Trailer Hitch C11576 Fit on 2018 Toyota Camry
- Curt 1-1/4-inch Class I hitch # C11576 is a confirmed fit for the 2018 Toyota Camry and it also fits the hybrid version. In a separate email I have sent along the install instructions from Curt.
If you need a wiring harness you can use part # 118763 and for a ball mount part # 36071. If you are going to use the hitch for a bike rack or other hitch-mount accessory be sure to select a 1-1/4-inch Class I type, such as Thule bike rack # TH23JV and Curt cargo carrier # C18145. You will also...
view full answer... - Recommended Hitch for a 2023 Toyota Camry Hybrid
- I checked with our vendors and to add a hitch to your 2023 Toyota Camry Hybrid, I recommend the Curt Trailer Hitch item # C11576. This hitch is custom fit and bolts to your Camry with included hardware. I really like this hitch because the main crosstube mounts behind the rear bumper. This leaves only the 1-1/4" receiver visible.
If you are planning on towing you will also need a wiring harness item # 118763 for a hybrid and the Draw-Tite Drawbar item # 3593 and then for hitch balls item...
view full answer... - Dimensions of the Thule Stainless T-Bolt # 853-5648
- To see all of the dimension of the Thule Replacement Stainless Steel T-bolt, # 853-5648, that you referenced check out the picture I attached.
The width of the square head is 3/4 inches, the length of the threaded portion is 22 mm and the threaded portion of the T-bolt has a 1.5 mm pitch and is 3/8 inches wide.
view full answer... - What Size Nut for Carriage Bolts of Curt Hitch C11576
- The size of the carriage bolt that comes with the Curt hitch # C11576 is M8x1.25 so that would be the matching nut size you would need.
view full answer... - What are the Dimensions of Replacement Thrust Bearing, # BD500223 For Bulldog Trailer Jacks
- I spoke with my contact at Bulldog about the Replacement Thrust Bearing, # BD500223. He stated that the bearing has an inner diameter of approximately 0.525 inches, and outer diameter of 1.25 inches, and it is 0.43 inches thick.
view full answer... - Comparing Ground Clearance Of The Inno Tire Hold 2 Vs. Kuat NV Bike Racks
- The distance from the center of the hitch pin hole to farthest part of rack when folded down is 33" on the Kuat # NV22B and 18-1/2" when folded up. Compare that to the Inno # INH120 at 36" when folded down and 14-1/2" when folded up, the Inno provides some additional clearance when folded up while also extending out an additional 3" when extended which could potentially cause the rack to scrape when loaded if that already occurs with your Kuat.
An additional measurement we did while the...
view full answer...
Go To Results